KSD1020 KSD1020 Audio Frequency Amplifier • Complement to KSB810 TO-92S 1 1.Emitter 2. Collector 3. Base NPN Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol VCBO Collector-Base Voltage Parameter Ratings 30 Units V VCEO VEBO Collector-Emitter Voltage 25 V Emitter-Base Voltage 5.0 IC V Collector Current (DC) 700 mA ICP * Collector Current (Pulse) 1.0 A PC Collector Power Dissipation 350 mW TJ Junction Temperature 150 °C TSTG Storage Temperature -55 ~ 150 °C * PW≤10ms, Duty Cycle≤50% Electrical Characteristics Ta=25°C unless otherwise noted Symbol ICBO Parameter Collector Cut-off Current Test Condition VCB=30V, IE=0 Min. Typ. Max. 100 Units nA 100 nA IEBO Emitter Cut-off Current VEB=5V, IC=0 hFE1 hFE2 * DC Current Gain VCE=1V, IC=100mA VCE=1V, IC=700mA 120 35 200 140 400 VBE (on) Base-Emitter On Voltage VCE=6V, IC=10mA 600 640 700 mV VCE(sat) Collector-Emitter Saturation Voltage IC=700mA, IB=70mA 0.2 0.4 V VBE(sat) Base-Emitter Saturation Voltage IC=700mA, IB=70mA 0.95 1.2 V Cob Output Capacitance VCB=6V, IE=0, f=1MHz 13 25 pF fT Current Gain Bandwidth Product VCE=6V, IC=10mA 50 170 MHz * Pulse Test: PW≤350µs, Duty Cycle≤ 2% hFE1 Classification Classification Y G hFE1 120 ~ 240 200 ~ 400 ©2004 Fairchild Semiconductor Corporation Rev. B2, April 2004 KSD1020 Typical Characteristics 1000 20 IB = 120µA 16 hFE, DC CURRENT GAIN IC[mA], COLLECTOR CURRENT VCE= 1V IB = 140µA 18 IB = 100µA 14 12 IB = 80µA 10 IB = 60µA 8 6 IB = 40µA 4 100 10 IB = 20µA 2 1 0 0 10 20 30 40 50 1 VCE[V], COLLECTOR-EMITTER VOLTAGE 1000 VBE(sat) 100 VCE(sat) 100 1000 10000 IC[mA], COLLECTOR CURRENT Figure 3. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage ©2004 Fairchild Semiconductor Corporation fT[MHz], CURRENT GAIN-BANDWIDTH PRODUCT VBE(sat), VCE(sat)[V], SATURATION VOLTAGE IC=10IB 10 1000 10000 Figure 2. DC current Gain 10000 1 100 IC[mA], COLLECTOR CURRENT Figure 1. Static Characteristic 10 10 1000 VCE = 6V 100 10 1 1 10 100 1000 10000 IC[mA], COLLECTOR CURRENT Figure 4. Current Gain-Bandwidth Product Rev. B2, April 2004 KSD1020 Package Dimensions TO-92S 4.00 ±0.20 (1.10) 3.70 ±0.20 2.31 ±0.20 14.47 ±0.30 0.66 MAX. 0.49 ±0.10 1.27TYP [1.27±0.20] 1.27TYP [1.27±0.20] +0.10 0.35 –0.05 2.86 ±0.20 0.77 ±0.10 3.72 ±0.20 Dimensions in Millimeters ©2004 Fairchild Semiconductor Corporation Rev. B2, April 2004 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT Quiet Series™ ActiveArray™ FAST® FASTr™ Bottomless™ FPS™ CoolFET™ CROSSVOLT™ FRFET™ GlobalOptoisolator™ DOME™ GTO™ EcoSPARK™ HiSeC™ E2CMOS™ EnSigna™ I2C™ i-Lo™ FACT™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems 2. A critical component is any component of a life support which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be or (b) support or sustain life, or (c) whose failure to perform reasonably expected to cause the failure of the life support when properly used in accordance with instructions for use device or system, or to affect its safety or effectiveness. provided in the labeling, can be reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2004 Fairchild Semiconductor Corporation Rev. I10