www.fairchildsemi.com KA4558 Dual Operational Amplifier Features Descriptions • • • • • • • The KA4558 is a monolithic integrated circuit designed for dual operational amplifier. No frequency compensation required. No latch up. Large common mode and differential voltage range. Parameter tracking over temperature range. Gain and phase match between amplifiers. Internally frequency compensated. Low noise input transistors. 8-DIP 1 8-SOP 1 9-SIP 1 Internal Block Diagram Rev. 1.0.1 ©2001 Fairchild Semiconductor Corporation KA4558 Schematic Diagram (One Section Only) Absolute Maximum Ratings Parameter Symbol Value Unit VCC ±22 V VI(DIFF) 30 V Input Voltage VI ±15 V Power Dissipation PD 400 mW Operating Temperature Range KA4558 KA4558I TOPR 0 ~ 70 -40 ~ 85 °C Storage Temperature Range TSTG -65 ~ 150 °C Supply Voltage Differential Input Voltage 2 KA4558 Electrical Characteristics (VCC = 15V, VEE = - 15V ,TA = 25 °C unless otherwise specified) Parameter Input Offset Voltage Input Offset Current Input Bias Current Large Signal Voltage Gain Common Mode Input Voltage Range Symbol VIO GV Supply Voltage Rejection Ratio PSRR Supply Current (Both Amplifiers) Power Consumption (Both Amplifiers) VO(P-P) ICC PC Max - 2 6 - - 7.5 - 5 200 TA=TA(MAX) - - 300 TA =TA(MIN) - - 300 - 30 500 TA=TA(MAX) - - 800 TA =TA(MIN) - - 800 20 200 - - - - ±12 ±13 - - - - 70 90 - - - - 76 90 - 76 90 - VO(P-P)= ±10V,RL≤2KΩ Note 1 VI(R) CMRR Typ Note 1 IBIAS Note 1 RS≤10KΩ Note 1 RS≤10KΩ Note 1 RL≥10KΩ RL≥2KΩ KA4558/KA4558I Min RS≤10KΩ IIO Common Mode Rejection Ratio Output Voltage Swing Conditions Unit mV nA nA V/mV V dB dB ±12 ±14 - ±10 ±13 - - 3.5 5.8 TA =TA(MAX) - - 5.0 TA =TA(MIN) - - 6.7 - 70 170 TA =TA(MAX) - - 150 Ta = TA(MIN) - - 200 1.2 - - V/µs Note1 V mA mW Slew Rate (Note2) SR VI =10V, RL≥2KΩ CI≤100pF Rise Time (Note2) TR VI =20mV, RL≥2KΩ CI≤100pF - 0.3 - µs Overshoot (Note2) OS VI =20mV, RL≥2KΩ CI≤100pF - 15 - % Note : 1. KA4558 : TA(MIN) ≤TA≤TA(MAX) = 0≤TA≤ 70 °C , KA4558I : TA(MIN) ≤TA≤TA(MAX) = -40≤TA≤ +85 °C 2. Guaranteed by design. 3 KA4558 Typical Performance Characteristics 4 Figure 1. Burst Noise vs Source Resistance Figure 2. RMS Noise vs Source Resistance Figure 3. Output Noise vs Source Resistance Figure 4. Spectral Noise Density Figure 5. Open Loop Frequency Response Figure 6. Phase Margin vs Frequency KA4558 Typical Performance Characteristics (continued) Figure 7. Positive Output Voltage Swing vs Load Resistance Figure 8. Negative Output Voltage Swing vs Load Resistance Figure 9. Power Bandwidth (Large Signal Output Swing vs Frequency) 5 KA4558 Mechanical Dimensions Package 1.524 ±0.10 #5 2.54 0.100 5.08 MAX 0.200 7.62 0.300 3.40 ±0.20 0.134 ±0.008 +0.10 0.25 –0.05 +0.004 0~15° 6 0.010 –0.002 3.30 ±0.30 0.130 ±0.012 0.33 MIN 0.013 0.060 ±0.004 #4 0.018 ±0.004 #8 9.60 MAX 0.378 #1 9.20 ±0.20 0.362 ±0.008 ( 6.40 ±0.20 0.252 ±0.008 0.46 ±0.10 0.79 ) 0.031 8-DIP KA4558 Mechanical Dimensions (Continued) Package 8-SOP MIN #5 6.00 ±0.30 0.236 ±0.012 8° 0~ +0.10 0.15 -0.05 +0.004 0.006 -0.002 MAX0.10 MAX0.004 1.80 MAX 0.071 3.95 ±0.20 0.156 ±0.008 5.72 0.225 0.41 ±0.10 0.016 ±0.004 #4 1.27 0.050 #8 5.13 MAX 0.202 #1 4.92 ±0.20 0.194 ±0.008 ( 0.56 ) 0.022 1.55 ±0.20 0.061 ±0.008 0.1~0.25 0.004~0.001 0.50 ±0.20 0.020 ±0.008 7 8 +0.10 0.25 -0.05 +0.004 0.010 -0.002 1.25 ±0.10 0.049 ±0.004 1.15 ±0.20 0.045 ±0.008 3.30 ±0.20 0.130 ±0.008 6.00 MAX 0.236 3.00 ±0.20 0.118 ±0.008 2.54 0.100 0.60 ±0.10 0.024 ±0.004 1.20 ±0.10 0.047 ±0.004 22.24 MAX 0.876 21.84 ±0.20 0.860 ±0.008 ( 0.76 ) 0.030 KA4558 Mechanical Dimensions (Continued) Package 9-SIP #1 #8 5.80 ±0.20 0.228 ±0.008 7.30 MAX 0.287 KA4558 Ordering Information Product Number Package KA4558 8-DIP KA4558D 8-SOP KA4558S 9-SIP KA4558I 8-DIP Operating Temperature 0 ~ + 70°C -40 ~ + 85°C 9 KA4558 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 6/1/01 0.0m 001 Stock#DSxxxxxxxx 2001 Fairchild Semiconductor Corporation