MBR(F,B)2535CT thru MBR(F,B)2560CT Vishay General Semiconductor Dual Common-Cathode Schottky Rectifier TO-220AB FEATURES • Guardring for overvoltage protection ITO-220AB • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability 3 2 1 1 MBR25xxCT PIN 1 PIN 2 PIN 3 CASE 2 • High frequency operation 3 • Meets MSL level 1, per J-STD-020C, LF maximum peak of 245 °C (for TO-263AB package) MBRF25xxCT PIN 1 • Solder dip 260 °C, 40 s (for TO-220AB and ITO-220AB package) PIN 2 PIN 3 TO-263AB K • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. 2 1 MBRB25xxCT PIN 1 PIN 2 K HEATSINK MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 15 A x 2 VRRM 35 V to 60 V IFSM 150 A VF 0.73 V at 30 A, 0.65 V at 15 A TJ max. 150 °C MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR2535CT MBR2545CT MBR2550CT MBR2560CT Maximum repetitive peak reverse voltage VRRM 35 45 50 60 Working peak reverse voltage VRWM 35 45 50 60 VDC 35 45 50 60 Maximum DC blocking voltage UNIT V IF(AV) 30 15 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 150 Peak repetitive reverse surge current per diode at tp = 2 µs, 1 kHz IRRM Peak non-repetitive reverse energy (8/20 µs waveform) per diode ERSM 25 mJ Electrostatic discharge capacitor voltage human body model: C = 100 pF, R = 1.5 kΩ VC 25 kV Maximum average forward rectified current at TC = 130 °C total device per diode A A Document Number: 88675 Revision: 08-Nov-07 1.0 0.5 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 MBR(F,B)2535CT thru MBR(F,B)2560CT Vishay General Semiconductor MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR2535CT MBR2545CT MBR2550CT MBR2560CT Voltage rate of change (rated VR) dV/dt Operating junction temperature range 10 000 TJ - 65 to + 150 Storage temperature range TSTG - 65 to + 175 Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 UNIT V/µs °C V ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage per diode (1) IF = 15 A IF = 15 A IF = 30 A IF = 30 A Maximum instantaneous reverse current at blocking voltage per diode (1) SYMBOL MBR2535CT MBR2545CT MBR2550CT MBR2560CT UNIT TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C VF 0.82 0.73 0.75 0.65 - V TC = 25 °C TC = 125 °C IR 0.2 40 1.0 50 mA Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR MBRF MBRB UNIT RθJC 1.5 4.5 1.5 °C/W Typical thermal resistance from junction to case per diode ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB MBR2545CT-E3/45 PREFERRED P/N 1.85 45 50/tube Tube ITO-220AB MBRF2545CT-E3/45 1.99 45 50/tube Tube TO-263AB MBRB2545CT-E3/45 1.35 45 50/tube Tube TO-263AB MBRB2545CT-E3/81 1.35 81 800/reel Tape reel TO-220AB MBR2545CTHE3/45 (1) 1.85 45 50/tube Tube ITO-220AB MBRF2545CTHE3/45 (1) 1.99 45 50/tube Tube TO-263AB MBRB2545CTHE3/45 (1) 1.35 45 50/tube Tube TO-263AB MBRB2545CTHE3/81 (1) 1.35 81 800/reel Tape reel Note: (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88675 Revision: 08-Nov-07 MBR(F,B)2535CT thru MBR(F,B)2560CT Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 100 Instantaneous Reverse Current (mA) Average Forward Current (A) Resistive or Inductive Load 24 18 12 6 0 100 50 TJ = 125 °C 1 TJ = 75 °C 0.1 0.01 TJ = 25 °C 0 150 20 40 60 80 100 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Characteristics Per Diode 10 000 150 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = TJ Max. 8.3 ms Single Half Sine-Wave 125 Junction Capacitance (pF) Peak Forward Surge Current (A) 10 0.001 0 100 75 50 25 1000 MBR2535CT - MBR2545CT MBR2550CT & MBR2560CT 100 0 10 1 0.1 100 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 100 TJ = 150 °C 10 Pulse Width = 300 µs 1 % Duty Cycle 1.0 TJ = 25 °C 0.1 MBR2535CT - MBR2545CT MBR2550CT & MBR2560CT 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) MBR2535CT - MBR2545CT MBR2550CT & MBR2560CT 10 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode Document Number: 88675 Revision: 08-Nov-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 MBR(F,B)2535CT thru MBR(F,B)2560CT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) PIN 2 3 0.160 (4.06) 0.140 (3.56) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.671 (17.04) 0.651 (16.54) PIN 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 7° REF. 0.076 (1.93) REF. 45° REF. 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88675 Revision: 08-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1