Tyco / Electronics PolySwitch® PTC Devices Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 FAX 800-227-4866 PRODUCT: TR600-160-RA DOCUMENT: SCD 24953 PCN: 041478 REV LETTER: A REV DATE: JANUARY 29, 2002 PAGE NO.: 1 OF 1 Overcurrent Protection Device Specification Status: Released Max Electrical Rating at 20°°C Operating Voltage: 250VDC Fault Voltage: 600VRMS Interrupt Current: 3ARMS A C Lead Material : 22 AWG Sn/Pb plated copper F Marking: B Raychem Logo and Voltage 600 160 D Part Identification Lot Identification E CENTER TO CENTER TABLE I. DIMENSIONS: A mm: in: MIN --- B MAX 16.0 (0.630) MIN --- C MAX 12.6 (0.496) MIN --- D MAX MIN 6.0 4.7 (0.236) (0.185) E MAX --- NOM 5.0 (0.197) F MIN MAX 10.0 (0.394) TABLE II. PERFORMANCE RATINGS @ 20°°C (unless otherwise noted): IHOLD (A) 20°C 0.160 60°C 0.100 RESISTANCE (Ω) R MIN 4.0 R MAX 7.0 R1 MAX* 16.0 OPERATING TYPICAL TIME TO TRIP (S) TEMPERATURE (°C) @ 1A TYP MIN MAX 9.5 -40 85 * Maximum device resistance @ 20°C measured 1 hour post trip. Storage Temperature: Reference Documents: Precedence: Effectivity: CAUTION: -40° to 85°C PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.