AD ADMTV201

Low Power
Mobile TV Tuner IC for ISDB-T
ADMTV201
FEATURES
FUNCTIONAL BLOCK DIAGRAM
VDDRF VDDIF
PD
VDDDIG
VDDIO
ADMTV201
RF AGC
RF POWER
DETECTOR
ADJ RSSI
0/90
UHFIN
RF RSSI
1.2V
LDO
LDO2
IFOUT
BPF
IFAGC
FRAC-N
PLL
LDO
VDDVCO LDOOUT
CLKOUT
XOUT
DIGITAL
CONTROL
XIN
SCL
SDA
AS
Figure 1.
APPLICATIONS
ISDB-T (one-segment) digital TV for mobile phone
Low power portable TV, PDA, PMP, car navigation, and USB
applications
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The ADMTV201 is a highly integrated, CMOS single-chip, low IF,
single-conversion tuner IC for digital mobile TV. It has a single
RF input for UHF (470 MHz ~ 806 MHz). It supports one segment
of the ISDB-T standard and includes two UHF low noise amplifiers (LNAs), an RF programmable gain amplifier (RF PGA), a
downconversion mixer, a complex band-pass filter (CBPF), an IF
PGA, a voltage controlled oscillator (VCO), and a fractional-N
phase-locked loop (PLL).
1.
2.
The RF PGA is controlled by an internal RF automatic gain control
(RF AGC) loop, and the IF PGA is controlled by a demodulator.
The PGAs provide >120 dB of gain control range.
3.
4.
5.
6.
Ultralow Noise: 2.5 dB Maximum Gain.
UHF Frequency Range: 470 MHz ~ 806 MHz for the
ISDB-T UHF Band in Japan and Brazil.
Ultralow Power Consumption: 76 mW.
Smart Power Control (SPC) for Dynamic Power Savings.
On-Chip LDO Option for 1.2 V Power Supply.
Compact WLCSP Package. The ADMTV201 is available in
a 2.14 mm × 2.09 mm package, with a maximum height of
0.35 mm.
The ADMTV201 consumes ultralow power in comparison to
conventional tuners. It is appropriate for portable applications
that require low power consumption and includes an industrystandard I2C® serial bus interface. The primary application of
the ADMTV201 is the portable terrestrial TV receiver, such
as the mobile TV phone.
For more information about the ADMTV201, email Analog Devices, Inc., at [email protected]
Rev. Sp0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2009 Analog Devices, Inc. All rights reserved.
07594-001
Ultralow noise figure: 2.5 dB in maximum gain
UHF (470 MHz ~ 806 MHz) for ISDB-T in Japan and Brazil
Fully compatible with ISDB-T (one segment only)
Operating dynamic range: −99.5 dBm to +10 dBm
Ultralow power consumption: 76 mW
Supply voltage: 1.8 V core and 1.8 V ~ 3.3 V I/O
On-chip LDO option for 1.2 V power supply
On-chip power-on reset
Ultrasmall WLCSP package: 2.14 mm × 2.09 mm
On-chip low phase noise and wide frequency range VCO
On-chip bandwidth-adjustable band-pass filter
Integrated IF PGA for direct connection to digital
demodulators
Noise/linearity optimization through internal RF RSSI and
the IF AGC and RF AGC loops
Reference clock output for demodulator
Adjustable take-over points (TOP)
I2C serial bus interface
RoHS-compliant WLCSP package
ADMTV201
NOTES
Purchase of licensed I2C components of Analog Devices or one of its sublicensed Associated Companies conveys a license for the purchaser under the Philips I2C Patent
Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips.
©2009 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D07594-0-6/09(Sp0)
Rev. Sp0 | Page 2 of 2