SANYO FH105

Ordering number:ENN6219
NPN Epitaxial Planar Silicon Composite Transistor
FH105
High-Frequency Low-Noise Amplifier,
Differential Amplifier Applications
Package Dimensions
unit:mm
2160
[FH105]
0.25
6
5
4
E2
1 2
0.65
2.0
Tr2
C1
B2
1 : Collector1
2 : Base2
3 : Collector2
4 : Emitter2
5 : Emitter1
6 : Base1
SANYO : MCP6
0.9
Tr1
3
0.2
0.425
E1
0 to 0.1
1.25
2.1
Electrical Connection
B1
0.15
0.2
· Composite type with 2 transistors contained in the
MCP package currently in use, improving the
mounting efficiency greatly.
· The FH105 is formed with two chips, being equivalent to the 2SC5245, placed in one package.
· Excellent in thermal equilibrium and pair capability.
0.425
Features
C2
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
Unit
Collector-to-Base Voltage
VCBO
20
V
Collector-to-Emitter Voltage
VCEO
VEBO
10
V
Emitter-to-Base Voltage
Collector Current
IC
PC
Collector Dissipation
Total Dissipation
Junction Temperature
PT
Tj
Storage Temperature
Tstg
1.5
V
30
mA
Mounted on a ceramic board (250mm2×0.8mm) 1unit
150
mW
Mounted on a ceramic board (250mm2×0.8mm)
300
mW
150
˚C
–55 to +150
˚C
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
min
typ
max
Unit
Collector Cutoff Current
ICBO
VCB=10V, IE=0
1.0
µA
Emitter Cutoff Current
IEBO
10
µA
DC Current Gain
hFE
hFE
VEB=1V, IC=0
VCE=5V, IC=10mA
90
VCE=5V, IC=10mA
0.7
DC Current Gain Ratio
(small/large)
Base-to-Emitter Voltage Difference
VBE
(large-small)
200
0.95
VCB=5V, IC=10mA
1.0
mV
Continued on next page.
Note) The specifications shown above are for each individual transistor.
Marking : 105
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
N0199TS (KOTO) TA-1702 No.6219–1/5
FH105
Continued from preceding page.
Parameter
Symbol
Gain-Bandwidth Product
fT
Cob
Output Capacitance
Forward Transfer Gain
min
VCE=5V, IC=10mA
typ
8
| S21e |2
VCB=10V, f=1MHz
VCE=5V, IC=10mA, f=1.5GHz
NF
VCE=5V, IC=5mA, f=1.5GHz
Noise Figure
Ratings
Conditions
Unit
max
11
GHz
0.45
8
0.7
pF
10
dB
1.4
3.0
dB
Note) The specifications shown above are for each individual transistor.
Marking : 105
hFE -- IC
5
fT -- IC
3
Gain-Bandwidth Product, fT – GHz
VCE=5V
3
DC Current Gain, hFE
2
100
7
5
3
2
10
7
5
0.1
=5V
VCE
1V
10
7
5
3
2
1.0
7
2
3
5
7 1.0
2
3
5 7 10
2
3
5
0.1
5 7 100
IT00322
Collector Current, IC – mA
Reverse Transfer Capacitance, Cre – pF
3
2
1.0
7
5
3
2
0.1
7
2
3
5 7 1.0
2
3
5
7 10
2
Collector-to-Base Voltage, VCB -- V
3
5
7 1.0
2
3
5
7
10
5
f=1MHz
2
1.0
7
5
3
2
0.1
7
2
3
5 7 1.0
2
3
5
7 10
2
Collector-to-Base Voltage, VCB -- V
IT00324
3
5
IT00325
NF -- IC
12
VCE=2V
f=1GHz
10
Noise Figure, NF – dB
10
8
4
2
2
3
5
7
1.0
2
3
5
7 10
Collector Current, IC – mA
2
5V
6
V
CE=1
V
Noise Figure, NF – dB
3
IT00323
3
f=1.5GHz
0
0.1
2
Cre -- VCB
5
7 0.1
5
NF -- IC
12
3
5
f=1MHz
5
7 0.1
2
Collector Current, IC – mA
Cob -- VCB
5
Output Capacitance, Cob – pF
2
8
6
4
2
2
3
5
IT00326
0
0.1
2
3
5
7 1.0
2
3
5
7 10
Collector Current, IC – mA
2
2
3
5
IT00327
No.6219–2/5
FH105
C
16
C
IT00326
2
S21e -- IC
2
S21e -- IC
16
f=1GHz
Forward Transfer Gain, S21e – dB
14
2
2
12
10
5V
2V
=1V
V CE
8
6
4
2
0
12
10
8
6
4
2
0
3
5
7
2
1.0
3
5
7
10
2
3
Collector Current, IC – mA
5
7 100
IT00328
3
5
7 1.0
2
3
5
7
2
10
3
5
Collector Current, IC – mA
7 100
IT00329
PC -- Ta
350
Collector Dissipation, PC – mW
14
5V
2V
V
=1
V CE
Forward Transfer Gain, S21e – dB
f=1.5GHz
Mounted on a ceramic board (250mm2×0.8mm)
300
250
To
t
al
200
di
ss
150
ip
ati
on
1 un
it
100
50
0
0
20
40
60
80
100
120
Ambient Temperature, Ta – °C
140
160
IT00330
S parameter
S11e
f=200MHz to 2000MHz(200MHz Step)
S21e
f=200MHz to 2000MHz(200MHz Step)
90°
j50
j25
120°
j100
j150
j200
j250
j10
0
--j10
25 2.0GHz
250
150
50 100
2.0GHz
VCE=5V
2.0GHz
IC=10mA
VCE=5V
IC=5mA 0.2GHz 0.2GHz
z
2.0GH
--j250
0.2GHz 0.2GHz
--j200
--j150
VCE=1V
VCE=2V
IC=1mA
--j100
--j25
IC=3mA
10
--j50
IT00331
60°
VCE=5V
IC=10mA
150° 0.2GHz
VCE=5V
IC=5mA
2.0GHz
0.2GHz
2.0GHz
VCE=2V
2.0GHz
0.2GHz
IC=3mA V =1V
4
8
°
CE
±180
2.0GHz
IC=1mA 0.2GHz
30°
12
16 20
0
--30°
--150°
--120°
--60°
--90°
IT00332
No.6219–3/5
FH105
S22e
f=200MHz to 2000MHz(200MHz Step)
S12e
f=200MHz to 2000MHz(200MHz Step)
90°
120°
150°
±180°
60°
2.0GHz 2.0GHz
VCE=5V
2.0GHz
IC=5mA
VCE=5V
2.0GHz
IC=10mA
30°
VCE=2V VCE=1V
0.2GHz
IC=3mA IC=1mA
0.2GHz
0.2GHz
0.2GHz
0.04 0.08 0.12 0.16 0.2
0
j50
j25
j100
j150
j200
j250
j10
10
0
25
--j10
--120°
--j25
--60°
--90°
150
100 V =5V
CE
250
IC=10mA 0.2GHz
0.2GHz 0.2GHz
2.0GHz
0.2GHz
2.0GHz
2.0GHz
--j250
--j200
2.0GHz
VCE=1V --j150
VCE=5V
IC=1mA
IC=5mA
VCE=2V
--j100
IC=3mA
--j50
--30°
--150°
50
IT00333
IT00334
S Parameters (Common emitter)
VCE=5V, IC=5mA, ZO=50Ω
Freq (MHz)
| S11 |
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
200
0.763
–37.5
11.926
146.9
0.036
70.7
0.892
–19.1
400
0.590
–65.4
9.202
124.3
0.058
60.9
0.740
–29.1
600
0.456
–85.5
7.173
109.4
0.073
57.4
0.631
–33.7
800
0.374
–102.0
5.743
98.7
0.086
56.7
0.566
–35.8
1000
0.323
–115.0
4.785
90.5
0.098
56.7
0.528
–37.2
1200
0.288
–127.5
4.105
83.6
0.110
57.2
0.505
–38.4
1400
0.264
–137.7
3.599
77.5
0.123
57.7
0.488
–39.6
1600
0.248
–147.4
3.213
71.3
0.136
57.6
0.476
–41.2
1800
0.239
–156.9
2.905
66.4
0.150
57.6
0.466
–43.3
2000
0.235
–165.7
2.651
61.3
0.165
57.2
0.462
–45.4
VCE=5V, IC=10mA, ZO=50Ω
Freq (MHz)
| S11 |
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
200
0.605
–52.6
16.354
136.2
0.031
67.5
0.804
–23.9
400
0.417
–84.6
11.011
113.3
0.048
62.4
0.622
–30.5
600
0.319
–106.3
8.026
100.5
0.062
62.2
0.533
–32.0
800
0.266
–124.6
6.250
91.3
0.076
63.4
0.491
–32.4
1000
0.238
–136.5
5.115
84.7
0.090
64.3
0.469
–33.2
1200
0.225
–148.9
4.336
78.8
0.104
64.4
0.458
–34.6
1400
0.215
–158.3
3.813
73.4
0.119
64.5
0.449
–35.8
1600
0.213
–167.3
3.365
68.1
0.135
63.8
0.443
–37.7
1800
0.212
–175.6
3.030
63.5
0.150
63.1
0.436
–39.6
2000
0.216
–177.5
2.754
58.9
0.166
62.5
0.438
–41.9
No.6219–4/5
FH105
VCE=2V, IC=3mA, ZO=50Ω
Freq (MHz)
| S11 |
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
200
0.842
–30.7
8.491
153.0
0.044
72.5
0.931
–17.1
400
0.704
–56.3
7.161
131.9
0.075
60.9
0.808
–28.8
600
0.579
–76.1
5.879
116.3
0.095
54.1
0.696
–36.2
800
0.480
–93.1
4.882
104.2
0.109
51.0
0.615
–40.6
1000
0.417
–106.3
4.154
95.0
0.121
49.3
0.564
–43.5
1200
0.376
–119.6
3.597
87.1
0.132
48.7
0.526
–45.8
1400
0.343
–130.2
3.212
80.2
0.143
48.6
0.496
–47.5
1600
0.319
–140.5
2.875
73.4
0.154
48.7
0.475
–49.6
1800
0.303
–150.0
2.604
67.7
0.166
48.6
0.461
–51.6
2000
0.298
–160.0
2.383
62.1
0.179
48.9
0.451
–52.9
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
VCE=1V, IC=1mA, ZO=50Ω
Freq (MHz)
| S11 |
200
0.945
–18.9
3.296
162.5
0.054
77.2
0.980
–11.0
400
0.884
–37.3
3.206
145.9
0.102
65.9
0.934
–20.5
600
0.810
–53.6
2.942
131.2
0.139
56.3
0.870
–29.0
800
0.728
–69.4
2.711
117.8
0.166
48.6
0.811
–35.5
1000
0.667
–82.5
2.449
107.0
0.187
42.5
0.763
–40.9
1200
0.605
–95.8
2.252
96.9
0.199
37.3
0.715
–45.7
1400
0.561
–106.1
2.061
88.1
0.207
33.5
0.673
–49.4
1600
0.518
–117.2
1.909
79.5
0.212
30.6
0.638
–53.4
1800
0.492
–127.5
1.766
72.2
0.215
28.6
0.611
–56.5
2000
0.465
–137.9
1.658
65.2
0.217
27.6
0.592
–59.9
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of November, 1999. Specifications and information herein are subject
to change without notice.
PS No.6219–5/5