SD1020CT Thru SD10100CT SCHOTTKY BARRIER RECTIFIER VOLTAGE - 20 to 100 Volts CURRENT - 10.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O TO-251AB • For thorough hole applications • Low profile package .264(6.7) .248(6.3) • Built-in strain relief .098 (2.5 ) .082 (2.1 ) • Low power loss, High efficiency .024(0.6 ) .016(0.4 ) .063(1.6) .047(1.2) .216(5.5) .200(5.1) • Metal to silicon rectifier majority carrier conduction 4 .225(5.7) .209(5.3) • High current capability, low VF • High surge capacity .307(7.8) .283(7.2) • For use in low voltage high frequency inverters, free wheeling, and polarity protection applications • High temperature soldering guaranteed:260°C/10 seconds at terminals 1 .071(1.8) .051(1.3) 3 .032(0.8) .012(0.3) .02 (0.5) 2 .09 .09 (2.3) (2.3) MECHA NICAL DATA 2 Case: TO-251AB molded plastic 2 3 4 4 1 2 3 4 Terminals: Solder plated, solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes cathode Weight: 0.015 ounce, 0.4 gram. MA XIMUM RATINGS A ND ELECTRICA L CHARA CTERISTI CS Ratings at 25oC ambient temperature unless otherwise specified. Resistive or inductive load. SYMBOLS SD1020CT SD1030CT SD1040CT SD1050CT SD1060CT SD1080CT SD10100CT UNITS Maximum Recurrent Peak Reverse Voltage V RR M 20 30 40 50 60 80 100 Volts Maximum RMS Voltage V RM S 14 21 28 35 42 56 70 Volts Maximum DC Blocking Voltage V DC 20 30 40 50 60 80 100 Volts Maximum Average Forward Rectified Current at TC =75 oC I (AV) 10.0 10.0 10.0 10.0 10.0 10.0 10.0 Amps Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load(JEDEC method) I 100 100 100 100 100 100 100 Amps 0.55 0.55 0.55 0.75 0.75 0.85 0.85 Volts 0.2 20 0.2 20 0.2 20 0.2 20 0.2 20 0.2 20 0.2 20 mA 6 80 6 80 6 80 6 80 6 80 6 80 6 80 FSM Maximum Instantaneous Forward Voltage at 5.0A (Note 1) VF Maximum DC Reverse Current (Note 1)T A=25oC at Rated DC Blocking Voltage TA=100oC I Maximum Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range R R ?JC R ?JA C/W J -55 to +125 o C STG -65 to +150 o C T T o NOTES: 1. Pulse Test with PW=300µsec, 2% Duty Cycle. 2. Mounted on P.C. Board with 14mm2 (.013mm thick) copper pad areas. Part Number: SD1020CT - SD10100CT PAGE 1 Part Number: SD1020CT - SD10100CT PAGE 2