MAXIM MAX5421BEUB

19-2229; Rev 0; 10/01
Digitally Programmable Precision
Voltage Divider for PGAs
Features
♦ Four Precision Divider Ratios For Noninverting
Gains of 1, 2, 4, and 8 in PGAs
♦ 0.025%, 0.09%, or 0.5% Ratio Accuracy
Guaranteed Over -40°C to +85°C
♦ On-Chip Matching Resistor for Op Amp BiasCurrent Compensation (MAX5421)
♦ 5V Single or ±5V Dual Supply Operation
♦ Low 3µA Supply Current
♦ CMOS/TTL Logic Compatible 2-Wire Parallel
Interface
♦ Small 8-Pin and 10-Pin µMAX Packages
Applications
General-Purpose Programmable Noninverting
Amplifiers
Programmable Instrumentation Amplifiers
Ordering Information
TEMP.
RANGE
PART
PINPACKAGE
GAIN
ACCURACY
MAX5420AEUA -40°C to +85°C
8 µMAX
0.025%
MAX5420BEUA
-40°C to +85°C
8 µMAX
0.09%
MAX5420CEUA -40°C to +85°C
8 µMAX
0.5%
MAX5421AEUB -40°C to +85°C
10 µMAX
0.025%
MAX5421BEUB
-40°C to +85°C
10 µMAX
0.09%
MAX5421CEUB -40°C to +85°C
10 µMAX
0.5%
Pin Configurations
Functional Diagram
TOP VIEW
VDD 1
VDD
8
H
7
W
3
6
L
D0 4
5
D1
H
VSS 2
MAX5420
MAX5421
GND
W
D0
MAX5420
DECODER
µMAX-8
D1
MATCH_H
VDD 1
MATCH_L
VSS GND L
MAX5421 ONLY
10 H
VSS
2
GND
3
D0
4
7
MATCH_H
D1
5
6
MATCH_L
MAX5421
9
W
8
L
µMAX-10
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX5420/MAX5421
General Description
The MAX5420 and MAX5421 are digitally programmable
precision voltage dividers optimized for use in digitally programmable gain amplifier configurations. The MAX5420/
MAX5421 operate from a single +5V supply or dual ±5V
supply, and consume only 3µA supply current. These
devices consist of a digitally selectable resistor array that
provides four precision noninverting gains of 1, 2, 4, and 8
for PGAs. The MAX5420 and MAX5421 achieve a resistor
ratio accuracy of 0.025% (MAX542_A), 0.09% (MAX542_B),
and 0.5% (MAX542_C). The MAX5421 includes an on-chip
matching resistor for op amp bias-current compensation.
The MAX5420 and MAX5421 are available in 8-pin and
10-pin µMAX packages. The devices are specified over
the extended temperature range (-40°C to +85°C).
MAX5420/MAX5421
Digitally Programmable Precision
Voltage Divider for PGAs
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
VSS to GND...............................................................+0.3V to -6V
D0, D1 to GND ...........................................-0.3V to (VDD + 0.3V)
H, L, W, MATCH_ to GND ................(VSS - 0.3V) to (VDD + 0.3V)
Input and Output Latchup Immunity.................................±50mA
Continuous Power Dissipation (TA = +70°C)
8-Pin µMAX (derate 4.1mW/°C above +70°C) .............333mW
10-Pin µMAX (derate 5.6mW/°C above +70°C) ...........444mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +5V ±5%, VSS = -5V ±5% or VSS = GND, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
Divider Ratio Accuracy
H-to-L Resistance
RHL
Input Resistance at H
RH
Input Resistance at W
RW
CONDITIONS
MIN
±0.025
MAX542_B
±0.09
MAX542_C
±0.5
(Figure 1)
15
Ratio = 1
VSS = -5V
300
VSS = 0
500
Ratio = 1
%
kΩ
8
5
MAX5421
UNITS
kΩ
kΩ
15
CANALOG
Matching Resistor
MAX
MAX542_A
Ratio = 2, 4, 8
Capacitance at H, L, W,
MATCH_H, MATCH_L
TYP
VSS = -5V
300
VSS = 0
500
Ratio = 2, 4, 8
pF
Ω
8
kΩ
0.5
µs
DYNAMIC PERFORMANCE
Switching Time
tS
VDD = +5V, VSS = -5V, digital input 0 to +3V,
VW settles to 0.02% of final value with 2pF
capacitive load. Circuit of Figure 2.
DIGITAL INPUTS
Input High Voltage
VIH
Input Low Voltage
VIL
Input Leakage Current
Input Capacitance
2
2.4
0.8
D1, D0 = VDD or GND
±1
5
_______________________________________________________________________________________
V
µA
pF
Digitally Programmable Precision
Voltage Divider for PGAs
(VDD = +5V ±5%, VSS = -5V ±5% or VSS = GND, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
POWER SUPPLIES
Positive Supply Voltage
VDD
4.75
5.25
Negative Supply Voltage
VSS
0
-5.25
Positive Supply Current
IDD
Negative Supply Current
ISS
D1, D0 = VDD or GND
3
7
D1, D0 = 3V
15
25
D1, D0 = VDD or GND
3
7
D1, D0 = 3V
15
25
W, H, L, MATCH_L, MATCH_H
Voltage Range
V
µA
µA
VDD
VSS
V
Typical Operating Characteristics
(VDD = +5V, VSS = -5V, or VSS = GND, TA = +25°C, unless otherwise noted.) (Note 1)
0.0046
0.0004
0.0042
0.0038
0.0034
0.0001
-15
10
35
TEMPERATURE (°C)
60
85
VH = +5V
VL = -5V
RATIO = 4
0.004
0.003
0.002
0.001
0.0030
-40
0.005
RATIO ACCURACY (%)
0.0007
VH = +5V
VL = -5V
RATIO = 2
MAX542_A DIVIDER RATIO ACCURACY
vs. TEMPERATURE
MAX5420/21 toc02
0.0050
RATIO ACCURACY (%)
RATIO ACCURACY (%)
VH = +5V
VL = -5V
RATIO = 1
MAX5420/21 toc01
0.0010
MAX542_A DIVIDER RATIO ACCURACY
vs. TEMPERATURE
MAX5420/21 toc03
MAX542_A DIVIDER RATIO ACCURACY
vs. TEMPERATURE
0
-40
-15
10
35
TEMPERATURE (°C)
60
85
-40
-15
10
35
60
85
TEMPERATURE (°C)
_______________________________________________________________________________________
3
MAX5420/MAX5421
ELECTRICAL CHARACTERISTICS (continued)
MAX5420/MAX5421
Digitally Programmable Precision
Voltage Divider for PGAs
Typical Operating Characteristics (continued)
(VDD = +5V, VSS = -5V, or VSS = GND, TA = +25°C, unless otherwise noted.) (Note 1)
VH = +5V
VL = -5V
RATIO = 1
0.004
0.003
0.002
0.0015
VH = +5V
VL = -5V
RATIO = 2
-0.0225
RATIO ACCURACY (%)
RATIO ACCURACY (%)
RATIO ACCURACY (%)
0.005
-0.0200
MAX5420/21 toc05
VH = +5V
VL = -5V
RATIO = 8
0.006
0.0020
MAX5420/21 toc04
0.007
MAX542_B DIVIDER RATIO ACCURACY
vs. TEMPERATURE
MAX542_B DIVIDER RATIO ACCURACY
vs. TEMPERATURE
MAX5420/21 toc06
MAX542_A DIVIDER RATIO ACCURACY
vs. TEMPERATURE
0.0010
-0.0250
-0.0275
0.0005
0.001
10
35
60
85
-40
-15
10
35
60
85
-15
MAX542_B DIVIDER RATIO ACCURACY
vs. TEMPERATURE
MAX542_B DIVIDER RATIO ACCURACY
vs. TEMPERATURE
-0.050
VH = +5V
VL = -5V
RATIO = 8
RATIO ACCURACY (%)
-0.035
-0.040
35
60
85
-0.055
MAX542_A RATIO ACCURACY
vs. POSITIVE SUPPLY VOLTAGE
0.01
RATIO = 4
RATIO ACCURACY (%)
VH = +5V
VL = -5V
RATIO = 4
MAX5420/21 toc07
-0.030
10
TEMPERATURE (°C)
TEMPERATURE (°C)
MAX5420/21 toc08
-15
TEMPERATURE (°C)
-0.060
RATIO = 8
RATIO = 2
0.001
-0.065
-0.045
RATIO = 1
VH = +3V, VL = 0
0.0001
-0.070
10
35
60
-40
85
-15
MAX542_B RATIO ACCURACY
vs. POSITIVE SUPPLY VOLTAGE
60
4.75
85
5.00
0.01
RATIO ACCURACY (%)
RATIO = 2
RATIO = 8
0.001
RATIO = 8
RATIO = 2
RATIO = 4
5.25
POSITIVE SUPPLY VOLTAGE (V)
MAX542_A RATIO ACCURACY
vs. NEGATIVE SUPPLY VOLTAGE
MAX5420/21 toc10
RATIO = 4
0.01
35
TEMPERATURE (°C)
TEMPERATURE (°C)
0.1
10
MAX542_B RATIO ACCURACY
vs. NEGATIVE SUPPLY VOLTAGE
0.1
RATIO ACCURACY (%)
-15
MAX5420/21 toc11
-40
0.001
MAX5420/21 toc12
-0.050
RATIO ACCURACY (%)
RATIO ACCURACY (%)
-0.0300
-40
0
-40
MAX5420/21 toc09
0
RATIO = 4
RATIO = 2
0.01
RATIO = 8
VH = 5V, VL = 0
0.001
RATIO = 1
0.0001
VH = +3V, VL = 0
4.75
5.00
POSITIVE SUPPLY VOLTAGE (V)
4
VH = 5V, VL = 0
RATIO = 1
5.25
0.0001
-5.25
-4.00
RATIO = 1
-2.75
-1.50
NEGATIVE SUPPLY VOLTAGE (V)
-0.25
0.0001
-5.25
-4.00
-2.75
-1.50
NEGATIVE SUPPLY VOLTAGE (V)
_______________________________________________________________________________________
-0.25
Digitally Programmable Precision
Voltage Divider for PGAs
SWITCHING TIME
(RATIO 2-TO-4)
SWITCHING TIME
(RATIO 1-TO-2)
MAX5420/21 toc14
MAX5420/21 toc13
D0, 5V/div
0
D1, 5V/div
0
VW
2V/div
VW
1V/div
100ns/div
VH = +5V, VL = -5V
100ns/div
VH = +5V, VL = -5V
SWITCHING TIME
(RATIO 4-TO-8)
SUPPLY CURRENT
vs. TEMPERATURE
MAX5420/21 toc15
MAX5420/21 toc16
5
D1, D0 = GND or VDD
VW
500mV/div
4
SUPPLY CURRENT (µA)
5V
D0, 5V/div
0
3
2
1
0
100ns/div
VH = +5V, VL = -5V
-40
-15
10
35
60
85
TEMPERATURE (°C)
Note 1: For MAX542_C accuracy Typical Operating Characteristics, refer to MAX542_B accuracy Typical Operating Characteristics.
_______________________________________________________________________________________
5
MAX5420/MAX5421
Typical Operating Characteristics (continued)
(VDD = +5V, VSS = -5V, or VSS = GND, TA = +25°C, unless otherwise noted.) (Note 1)
MAX5420/MAX5421
Digitally Programmable Precision
Voltage Divider for PGAs
Pin Description
PIN
NAME
MAX5420
MAX5421
1
1
2
3
FUNCTION
VDD
Positive Supply Voltage
2
VSS
Negative Supply Voltage
3
GND
Ground
4, 5
4, 5
D0, D1
6
8
L
Low Terminal of Resistor-Divider
7
9
W
Resistor-Divider Output
Digital Control Inputs. Drive D0 and D1 logic high or logic low to set the divider ratio.
See Logic Control Truth Table.
8
10
H
High Terminal of Resistor-Divider
—
6
MATCH_L
Matching Resistor Low Terminal
—
7
MATCH_H
Matching Resistor High Terminal
Detailed Description
The MAX5420/MAX5421 are digitally programmable precision voltage dividers for programmable-gain amplifiers.
Operationally, these devices consist of digitally selectable
precision resistor-dividers providing noninverting gains of
1, 2, 4, and 8 for PGA applications (see Functional
Diagram and Figure 1).
Ratio = 1 +
R_B
R_ A
The MAX5420/MAX5421 achieve divider ratio accuracy of
0.025% (MAX5420A/MAX5421A), 0.09% (MAX5420B/
MAX5421B) or 0.5% (MAX5420C/MAX5421C).
The end-to-end resistance from H to L is 15kΩ. The
impedance seen at W is designed to be the same 8kΩ
for divider ratios 2, 4, and 8, ensuring excellent impedance matching and constant switching times. In gain of
+1 configuration, H is internally connected to W with a
typical resistance of 500Ω.
Matching Resistor (MAX5421)
The MAX5421 includes a matching resistor to compensate for offset voltage due to input bias current of the
op amp. The resistance from MATCH_H to MATCH_L,
equals the resistance seen at W for gains of 2, 4, and 8.
In the gain of +1, an internal switch connects
MATCH_H and MATCH_L. This internal switch matches
the impedance of the switch between H and W.
6
Table 1. Logic Control Truth Table
DIGITAL INPUTS
D1
D0
DIVIDER
RATIO
0
0
1
0
1
2
1
0
4
1
1
8
Digital Interface Operation
The MAX5420/MAX5421 feature a simple two-bit parallel programming interface. D1 and D0 program the
divider ratio setting according to the Logic Control
Truth Table (Table 1). The digital interface is CMOS/TTL
logic compatible.
Applications Information
Programmable-Gain Amplifier
The MAX5420/MAX5421 are ideally suited for high-precision PGA applications. The typical application circuit
of Figure 3 uses the MAX5421 with matching resistor to
compensate for voltage offset due to op amp input bias
currents. Use the MAX5420 with an ultra-low input bias
current op amp such as the MAX4237 (Figure 4).
Power Supplies and Bypassing
The MAX5420/MAX5421 operate from dual ±5V supplies, or a single +5V supply. For dual supplies, bypass
VDD and VSS with 0.1µF ceramic capacitors to GND.
For single supply, connect VSS to GND and bypass
VDD with a 0.1µF ceramic capacitor to GND.
_______________________________________________________________________________________
Digitally Programmable Precision
Voltage Divider for PGAs
VDD
RATIO = 1
+5V
MATCH_H
MATCH_L
VIN
VOUT
MAX5421
MAX4493
L
R2B
R3B
MAX5420/MAX5421
+5V
H
H
R1B
GND VSS W
RATIO = 2
RATIO = 4
RATIO = 8
W
R3A
R2A
Figure 3. Programmable-Gain Amplifier with Op Amp BiasCurrent Matching
R1A
+5V
(
RATIO = 1+
R_B
R_A
VIN
)
MAX4237
VOUT
L
+5V
Figure 1. Simplified Functional Diagram
VDD
W
H
+5V
0.1µF
MAX5420
VDD H
VSS
RATIO = 1
R2B
R3B
L
GND
Figure 4. Programmable-Gain Amplifier
R1B
RATIO = 2
RATIO = 4
RATIO = 8
W
(
RATIO = 1+
R3A
R2A
R_B
R_A
R1A
)
TEKTRONIX P6245
OSCILLOSCOPE FET
PROBE
CL < 1pF
1MΩ
Switching Time and Layout Concerns
The switching time of the MAX5420/MAX5421 depends
on the capacitive loading at W. For best performance,
reduce parasitic board capacitance by minimizing the
circuit board trace from W to the op amp inverting input,
and choose an op amp with low input capacitance.
MAX5421
VSS
L
D1
0.1µF
-5V
GND
D0
Chip Information
TRANSISTOR COUNT: 118
PROCESS: CMOS
PULSE
GENERATOR
Figure 2. Switching Time Test Circuit
_______________________________________________________________________________________
7
Digitally Programmable Precision
Voltage Divider for PGAs
8LUMAXD.EPS
MAX5420/MAX5421
Package Information
8
_______________________________________________________________________________________
Digitally Programmable Precision
Voltage Divider for PGAs
10LUMAX.EPS
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 9
© 2001 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
MAX5420/MAX5421
Package Information (continued)