19-0817; Rev 5; 10/07 KIT ATION EVALU E L B AVAILA Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers Features The MAX9583/MAX9584/MAX9585 are small, low-power, multichannel video amplifiers with integrated reconstruction filters. Specially suited for standard-definition video signals, these devices are ideal for a wide range of television, set-top box, and portable applications. The MAX9583/MAX9584/MAX9585 inputs can be directly connected to the outputs of a video digital-toanalog converter (DAC). The reconstruction filter typically has ±1dB passband flatness at 8.5MHz and 55dB attenuation at 27MHz. The amplifiers have a 2V/V gain and the outputs can be DC-coupled to a 75Ω load which is the equivalent of two video loads, or AC-coupled to a 150Ω load. o Dual- (MAX9583), Triple- (MAX9584), and Quad- (MAX9585) Channel Devices o 8.5MHz, ±1dB Passband o 55dB Attenuation at 27MHz o Fixed Gain of 2V/V o Low Power: 3.5mA per Channel o 2.7V to 3.6V Single-Supply Operation o Small SOT23 and µMAX Packages The MAX9583/MAX9584/MAX9585 operate from a 2.7V to 3.6V single supply and are specified over the -40°C to +125°C automotive temperature range. The MAX9583 is offered in a small, 6-pin thin SOT23 package. The MAX9584 is offered in a small, 8-pin µMAX® package, and the MAX9585 is offered in a small, 10-pin µMAX package. Ordering Information PIN-PACKAGE CHANNELS PKG CODE MAX9583AZT+T 6 Thin SOT23-6 2 Z6+1 MAX9584AUA+T 8 µMAX-8 3 U8+1 MAX9585AUB+T 10 µMAX-10 4 U10+2 PART Applications Note: All devices are specified over the -40°C to +125°C operating temperature range. +Denotes a lead-free package. T = Tape and reel. Set-Top Boxes Televisions Portable Pin Configurations and Selector Guide located at end of data sheet. µMAX is a registered trademark of Maxim Integrated Products, Inc. Block Diagrams 0 TO 50mV BUFFER 300mV TO 400mV MAX9584 INA LPF AV = 2V/V LPF AV = 2V/V LPF AV = 2V/V OUTA BUFFER INB OUTB BUFFER INC OUTC Block Diagrams continued at end of data sheet. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. 1 MAX9583/MAX9584/MAX9585 General Description MAX9583/MAX9584/MAX9585 Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers ABSOLUTE MAXIMUM RATINGS VDD to GND ..............................................................-0.3V to +4V IN_ to GND ...............................................................-0.3V to +4V OUT_ Short-Circuit Duration to VDD, GND .................Continuous Continuous Input Current IN_ ................................................................................±20mA Continuous Power Dissipation (TA = +70°C) 6-Pin Thin SOT23 (derate 9.1mW/°C above +70°C) ....727mW 8-Pin µMAX (derate 4.5mW/°C above +70°C) .............362mW 10-Pin µMAX (derate 5.6mW/°C above +70°C) ...........444mW Operating Temperature Range .........................-40°C to +125°C Junction Temperature ......................................................+150°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VDD = 3.3V, GND = 0V, RL = no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C) (Note 1) PARAMETER SYMBOL CONDITIONS Supply Voltage Range VDD Guaranteed by PSRR Supply Current IDD Per channel Input Voltage Range VIN Guaranteed by DC voltage gain Input Current IIN VIN = 0V Input Resistance RIN DC Voltage Gain (Note 2) Av 3.5 2 ROUT PSRR mA 1.05 0 1.2 10 25 RL = 150Ω to GND VDD = 2.7V, 0V ≤ VIN ≤ 1.05V VDD = 3V, 0V ≤ VIN ≤ 1.2V Measured at VOUT, VIN = 0V, RL = 150Ω to GND Power-Supply Rejection Ratio V 7 0 0.6 2 2.04 1.92 2 2.04 µA V/V -2 0 +2 % 0.210 0.300 0.410 V 2.1 Measured at output, VDD = 2.7V, 0V ≤ VIN ≤ 1.05V, RL = 150Ω to VDD/2 2.1 Measured at output, VDD = 3V, 0V ≤ VIN ≤ 1. 2V, RL = 150Ω to -0.2V 2.4 Measured at output, VDD = 3V, 0V ≤ VIN ≤ 1. 2V, RL = 150Ω to VDD/2 2.4 Measured at output, VDD = 3.135V, 0V ≤ VIN ≤ 1.05V, RL = 75Ω to -0.2V 2.1 Short to GND (sourcing) 140 Short to VDD (sinking) 70 VOUT = 1.5V, -10mA ≤ ILOAD ≤ 10mA f = 1MHz, 100mVP-P VP-P MΩ 1.92 Measured at output, VDD = 2.7V, 0V ≤ VIN ≤ 1.05V, RL = 150Ω to -0.2V 2.7V ≤ VDD ≤ 3.6V UNITS 3.6 VDD = 2.7V Guaranteed by DC voltage gain Output Resistance MAX VDD = 3V Output Level Output Short-Circuit Current TYP 2.7 DC Gain Matching Output-Voltage Swing MIN 0.2 48 29 _______________________________________________________________________________________ VP-P mA Ω dB Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers (VDD = 3.3V, GND = 0V, RL = no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C) (Note 1) PARAMETER SYMBOL CONDITIONS MIN ±1dB passband flatness Standard-Definition Reconstruction Filter DG Differential Phase DP MAX 8.5 VIN = 1VP-P, reference frequency is 100kHz Differential Gain TYP f = 5.5MHz -0.15 f = 9.5MHz -3 f = 27MHz -55 5-step modulated staircase of 129mV step size and 286mV peak-to-peak subcarrier amplitude, f = 4.43MHz 5-step modulated staircase of 129mV step size and 286mV peak-to-peak subcarrier amplitude, f = 4.43MHz UNITS MHz dB 0.1 % 0.4 Degrees 2T Pulse-to-Bar K Rating 2T = 200ns, bar time is 18µs. The beginning 2.5% and the ending 2.5% of the bar time are ignored 0.6 K% 2T Pulse Response 2T = 200ns 0.2 K% 2T Bar Response 2T = 200ns, bar time is 18µs. The beginning 2.5% and the ending 2.5% of the bar time are ignored 0.2 K% Nonlinearity 5-step staircase 0 % Group Delay Distortion 100kHz ≤ f ≤ 5.5MHz, outputs are 2VP-P 9 ns Peak Signal to RMS Noise 100kHz ≤ f ≤ 5.5MHz 71 dB Output Impedance f = 5.5MHz 4.8 Ω All Hostile Crosstalk f = 4.43MHz -64 dB Note 1: All devices are 100% production tested at TA = +25°C. Specifications over temperature limits are guaranteed by design. Note 2: Voltage gain (AV) is a two-point measurement in which the output voltage swing is divided by the input voltage swing. Typical Operating Characteristics (VDD = SHDN = 3.3V, video outputs have RL = 150Ω connected to GND, TA = +25°C, unless otherwise noted.) VOUT = 100mVP-P 1 0 -10 10 MAX9583 toc03 0 2 MAX9853 toc02 VOUT = 100mVP-P MAX9583 toc01 10 LARGE-SIGNAL GAIN vs. FREQUENCY SMALL-SIGNAL GAIN FLATNESS vs. FREQUENCY SMALL-SIGNAL GAIN vs. FREQUENCY VOUT = 2VP-P 0 -10 -30 -40 -2 GAIN (dB) -20 GAIN (dB) GAIN (dB) -1 -3 -4 -30 -40 -5 -50 -20 -50 -6 -60 -60 -7 -70 -70 -8 100k 1M 10M FREQUENCY (Hz) 100M 1M 10M FREQUENCY (Hz) 100M 100k 1M 10M 100M FREQUENCY (Hz) _______________________________________________________________________________________ 3 MAX9583/MAX9584/MAX9585 ELECTRICAL CHARACTERISTICS (continued) Typical Operating Characteristics (continued) (VDD = SHDN = 3.3V, video outputs have RL = 150Ω connected to GND, TA = +25°C, unless otherwise noted.) 0 100 -10 -20 -1 80 -2 -3 -4 -30 PSRR (dB) DELAY (ns) 60 -40 -50 40 -5 -60 -6 20 -70 -7 1M 1M 100k 100M 10M 10M 10k 100M QUIESCENT SUPPLY CURRENT vs. TEMPERATURE VOLTAGE GAIN vs. TEMPERATURE OUTPUT VOLTAGE vs. INPUT VOLTAGE 2.03 13.0 3.0 2.5 OUTPUT VOLTAGE (V) VOLTAGE GAIN (V/V) 13.5 2.01 2.00 1.99 1.98 2.0 1.5 1.0 0.5 1.97 12.5 0 1.96 12.0 4 -0.5 1.95 -25 0 25 50 75 100 125 -50 -25 0 25 50 75 TEMPERATURE (°C) TEMPERATURE (°C) DIFFERENTIAL GAIN AND PHASE 2T RESPONSE 100 125 -0.3 0 0.3 0.6 0.9 -0.1 -0.2 -0.3 1 2 3 4 5 6 1.5 1.8 12.5T RESPONSE MAX9583 toc12 MAX9583 toc10 f = 4.43MHz 0 1.2 INPUT VOLTAGE (V) MAX9583 toc11 0.1 100M 3.5 MAX9583 toc08 2.04 MAX9583 toc07 14.0 0.8 0.6 0.4 0.2 0 -0.2 -0.4 10M FREQUENCY (Hz) 2.02 -0.4 1M FREQUENCY (Hz) 14.5 -50 100k FREQUENCY (Hz) 15.0 QUIESCENT SUPPLY CURRENT (mA) -80 0 -8 MAX9583 toc09 GAIN (dB) 0 MAX9583 toc06 VOUT = 2VP-P MAX9583 toc05 120 MAX9853 toc04 2 1 POWER-SUPPLY REJECTION RATIO vs. FREQUENCY GROUP DELAY vs. FREQUENCY LARGE-SIGNAL GAIN FLATNESS vs. FREQUENCY DIFFERENTIAL PHASE (deg) DIFFERENTIAL GAIN (%) MAX9583/MAX9584/MAX9585 Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers IN_ 200mV/div IN_ 200mV/div OUT_ 400mV/div OUT_ 400mV/div 7 f = 4.43MHz 1 2 3 4 5 6 7 100ns/div 400ns/div _______________________________________________________________________________________ Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers NTC-7 VIDEO TEST SIGNAL ON CVBS OUTPUTS PAL COLOR BARS PAL MULTIBURST RESPONSE MAX9583 toc15 MAX9583 toc14 MAX9583 toc13 IN_ 500mV/div IN_ 500mV/div IN_ 500mV/div OUT_ 1V/div OUT_ 1V/div OUT_ 1V/div 10µs/div 10µs/div 10µs/div INPUT-TO-INPUT CROSSTALK vs. FREQUENCY FIELD SQUARE-WAVE RESPONSE MAX9583 toc16 MAX9583 toc17 0 -20 IN_ 500mV/div GAIN (dB) -40 -60 -80 OUT_ 1V/div -100 -120 100k 2ms/div 1M 10M 100M FREQUENCY (Hz) OUTPUT-TO-OUTPUT CROSSTALK vs. FREQUENCY OUTPUT IMPEDANCE (Ω) -40 -60 -80 MAX9586 toc19 -20 GAIN (dB) 100 MAX9583 toc18 0 OUTPUT IMPEDANCE vs. FREQUENCY 10 1 0.1 -100 -120 0.01 100k 1M 10M FREQUENCY (Hz) 100M 100k 1M 10M FREQUENCY (Hz) _______________________________________________________________________________________ 5 MAX9583/MAX9584/MAX9585 Typical Operating Characteristics (continued) (VDD = SHDN = 3.3V, video outputs have RL = 150Ω connected to GND, TA = +25°C, unless otherwise noted.) Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers MAX9583/MAX9584/MAX9585 Pin Description MAX9583 MAX9584 MAX9585 6 SOT23 8 µMAX 10 µMAX 2 4 5 GND Ground 3 1 1 INA Video Input A 1 2 2 INB Video Input B — 3 3 INC Video Input C — — 4 IND Video Input D 4 7 9 OUTA Video Output A 6 6 8 OUTB Video Output B — 5 7 OUTC Video Output C — — 6 OUTD 5 8 10 VDD NAME FUNCTION Video Output D Positive Power Supply. Bypass to GND with a 0.1µF capacitor. Typical Application Circuits VDD GRAPHICS PROCESSING UNIT OR MPEG DECODER MAX9583 +3.3V 0.1µF GND BUFFER DAC LUMA INA LPF AV = 2V/V LPF AV = 2V/V OUTA 75Ω Y BUFFER DAC 6 CHROMA INB OUTB 75Ω _______________________________________________________________________________________ C Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers VDD GRAPHICS PROCESSING UNIT OR MPEG DECODER MAX9584 +3.3V 0.1µF GND BUFFER DAC LUMA INA LPF AV = 2V/V LPF AV = 2V/V LPF AV = 2V/V OUTA 75Ω Y BUFFER DAC CHROMA INB OUTB 75Ω C BUFFER DAC CVBS INC OUTC 75Ω CVBS VDD GRAPHICS PROCESSING UNIT OR MPEG DECODER MAX9585 +3.3V 0.1µF GND BUFFER DAC R INA LPF AV = 2V/V LPF AV = 2V/V LPF AV = 2V/V LPF AV = 2V/V OUTA 75Ω R BUFFER DAC G INB OUTB 75Ω G BUFFER DAC B INC OUTC 75Ω B BUFFER DAC CVBS IND OUTD 75Ω CVBS _______________________________________________________________________________________ 7 MAX9583/MAX9584/MAX9585 Typical Application Circuits (continued) MAX9583/MAX9584/MAX9585 Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers Detailed Description The MAX9583/MAX9584/MAX9585 filter and amplify the video DAC output in applications such as set-top boxes and televisions. These devices consist of input buffers, lowpass filters, and gain of 2V/V output amplifiers capable of driving a standard 150Ω video load to ground. Inputs The video inputs should be directly connected to the output of the video current DAC. DC coupling ensures that the input signals are ground referenced so that the sync tip of composite or luma signals is within 50mV of ground and the blank level of the chroma signal is between 0.5V and 0.65V. Since the input buffers are identical, any standard-definition video signal can be applied to those inputs provided the signal is between ground and 1.05V when V DD = 2.7V. For example, three composite video signals could be applied to INA, INB, and INC of the MAX9584. The RGB set or the YPbPr set can also be inputs to INA, INB, and INC of the MAX9584. Video Filter The filter passband (±1dB) is typically 8.5MHz, which makes the device suitable for standard-definition video signals from all sources (e.g., broadcast and DVD). Broadcast video signals are channel limited: NTSC signals have 4.2MHz bandwidth and PAL signals have 5MHz bandwidth. Video signals from a DVD player, however, are not channel limited, so the bandwidth of DVD video signals can approach the Nyquist limit of 6.75MHz. (Recommendation ITU-R BT.601-5 specifies 13.5MHz as the sampling rate for standard-definition video). Therefore, the maximum bandwidth of the signal is 6.75MHz. To ease the filtering requirements, most modern video systems oversample by two times, clocking the video current DAC at 27MHz. Outputs The video output amplifiers can both source and sink load current, allowing output loads to be DC- or ACcoupled. The amplifier output stage needs approximately 300mV of headroom from either supply rail. The devices have an internal level-shift circuit that positions the sync tip at approximately 300mV at the output. The blank level of the chroma output is positioned at approximately 1.3V if the blank level of the chroma input signal is 0.5V. The blank level of the chroma output is positioned at approximately 1.5V if the blank level of the chroma input signal is 0.6V. 8 If the supply voltage is greater than 3.135V (5% below a 3.3V supply), each amplifier can drive two DC-coupled video loads to ground. If the supply is less than 3.135V, each amplifier can drive only one DC-coupled or AC-coupled video load. Applications Information Reducing Power Consumption in the Video DACs The MAX9583/MAX9584/MAX9585 have high-impedance input buffers that work with source resistances as high as 1000Ω. To reduce power dissipation in the video DACs, the DAC output resistor can be scaled up in value. The reference resistor that sets the reference current inside the video DACs must also be similarly scaled up. For instance, if the output resistor is 37.5Ω, the DAC must source 26.7mA when the output is 1V. If the output resistor is increased to 300Ω, then the DAC only needs to source 3.33mA when the output is 1V. There is parasitic capacitance from the DAC output to ground. That capacitance, in parallel with the DAC output resistor, forms a pole that can potentially roll off the frequency response of the video signal. For example, 300Ω in parallel with 50pF create a pole at 10.6MHz. To minimize this capacitance, reduce the area of the signal trace attached to the DAC output as much as possible, and place the MAX9583/MAX9584/MAX9585 as close as possible to the video DAC outputs. AC-Coupling the Outputs The outputs can be AC-coupled since the output stage can source and sink current as shown in Figure 1. Coupling capacitors should be 220µF or greater to keep the highpass filter, formed by the 150Ω equivalent resistance of the video transmission line, to a corner frequency of 4.8Hz or below. The frame rate of PAL systems is 25Hz, and the frame rate of NTSC systems is 30Hz. The corner frequency should be well below the frame rate. Power-Supply Bypassing and Ground The MAX9583/MAX9584/MAX9585 operate from a singlesupply voltage down to 2.7V, allowing for low-power operation. Bypass VDD to GND with a 0.1µF capacitor. Place all external components as close as possible to the device. _______________________________________________________________________________________ Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers +3.3V 0.1µF GND MAX9585 MAX9583/MAX9584/MAX9585 VDD GRAPHICS PROCESSING UNIT OR MPEG DECODER BUFFER DAC R INA LPF AV = 2V/V LPF AV = 2V/V LPF AV = 2V/V LPF AV = 2V/V OUTA 75Ω 220µF R BUFFER DAC G INB OUTB 75Ω 220µF G BUFFER DAC B INC OUTC 75Ω 220µF B BUFFER DAC CVBS IND OUTD 75Ω 220µF CVBS Figure 1. AC-Coupled Outputs _______________________________________________________________________________________ 9 Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers MAX9583/MAX9584/MAX9585 Block Diagrams (continued) 0mV TO 50mV 300mV TO 400mV MAX9583 BUFFER INA LPF AV = 2V/V LPF AV = 2V/V OUTA BUFFER INB 0mV TO 50mV 300mV TO 400mV MAX9585 BUFFER INA OUTB LPF AV = 2V/V LPF AV = 2V/V LPF AV = 2V/V LPF AV = 2V/V OUTA BUFFER INB OUTB BUFFER INC OUTC BUFFER IND 10 OUTD ______________________________________________________________________________________ Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers TOP VIEW INB 1 + 6 INA 1 OUTB INA 1 + GND 2 MAX9583 INA 3 5 4 VDD INB 2 INC 3 GND 4 OUTA MAX9584 8 VDD INB 2 7 OUTA INC 3 6 OUTB IND 4 5 OUTC GND 5 8 µMAX + 10 VDD MAX9585 9 OUTA 8 OUTB 7 OUTC 6 OUTD 10 µMAX SOT23 Selector Guide PART PIN-PACKAGE PACKAGE SIZE CHANNELS TOP MARK MAX9583AZT+ 6 Thin SOT23-6 MAX9584AUA+ 8 µMAX-8 MAX9585AUB+ 10 µMAX-10 PKG CODE 2.9mm x 1.6mm 2 AADJ Z6+1 3mm x 3mm 3 — U8+1 3mm x 3mm 4 — U10+2 Note: All devices are specified over the -40°C to +125°C operating temperature range. +Denotes a lead-free package. Chip Information PROCESS: BiCMOS ______________________________________________________________________________________ 11 MAX9583/MAX9584/MAX9585 Pin Configurations Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) 6L THIN SOT23.EPS MAX9583/MAX9584/MAX9585 Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers 12 ______________________________________________________________________________________ Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers ______________________________________________________________________________________ 13 MAX9583/MAX9584/MAX9585 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) 4X S 8 8 INCHES DIM A A1 A2 b E Ø0.50±0.1 H c D e E H 0.6±0.1 L 1 1 α 0.6±0.1 S BOTTOM VIEW D MIN 0.002 0.030 MAX 0.043 0.006 0.037 0.014 0.010 0.007 0.005 0.120 0.116 0.0256 BSC 0.120 0.116 0.198 0.188 0.026 0.016 6° 0° 0.0207 BSC 8LUMAXD.EPS MAX9583/MAX9584/MAX9585 Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers MILLIMETERS MAX MIN 0.05 0.75 1.10 0.15 0.95 0.25 0.36 0.13 0.18 2.95 3.05 0.65 BSC 2.95 3.05 4.78 5.03 0.41 0.66 0° 6° 0.5250 BSC TOP VIEW A1 A2 A α c e FRONT VIEW b L SIDE VIEW PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE, 8L uMAX/uSOP APPROVAL DOCUMENT CONTROL NO. 21-0036 14 ______________________________________________________________________________________ REV. J 1 1 Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with DC-Coupled Input Buffers 10LUMAX.EPS e 4X S 10 10 INCHES H Ø0.50±0.1 0.6±0.1 1 1 0.6±0.1 BOTTOM VIEW TOP VIEW D2 MILLIMETERS MAX DIM MIN 0.043 A 0.006 A1 0.002 A2 0.030 0.037 D1 0.120 0.116 0.118 0.114 D2 E1 0.116 0.120 0.118 E2 0.114 0.199 H 0.187 L 0.0157 0.0275 L1 0.037 REF b 0.007 0.0106 e 0.0197 BSC c 0.0035 0.0078 0.0196 REF S α 0° 6° MAX MIN 1.10 0.15 0.05 0.75 0.95 3.05 2.95 2.89 3.00 3.05 2.95 2.89 3.00 4.75 5.05 0.40 0.70 0.940 REF 0.177 0.270 0.500 BSC 0.090 0.200 0.498 REF 0° 6° E2 GAGE PLANE A2 c A b A1 α E1 L D1 L1 FRONT VIEW SIDE VIEW PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE, 10L uMAX/uSOP APPROVAL DOCUMENT CONTROL NO. 21-0061 REV. 1 1 Revision History Pages changed at Rev 1: 1, 2, 20 Pages changed at Rev 2: 1, 2, 6, 11–15 (deleted some package outlines) Pages changed at Rev 3: 1, 15 Pages changed at Rev 4: 1–4, 8, 15 Pages changed at Rev 5: 1, 8, 15 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 15 © 2007 Maxim Integrated Products Heaney is a registered trademark of Maxim Integrated Products, Inc. MAX9583/MAX9584/MAX9585 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.)