The Analog Mixed Signal Company Amplifier ID: 011 Name AMP-06 Description This op-amp is designed for on chip signal processing, especially as a low-noise amplifier. It uses pole splitting for compensation and is designed for stable operation at unity gain frequency. The results are simulated with extracted parasitics. To adapt this op-amp to other demands, scale the output stage and the Miller-cap or change the bias currents. Conditions Temperature Reference Current (Iref) VDD 27°C 10 µA 2.5 V VSS -2.5 V Load 100 kOhms || 10 pF Simulated Data Symbol VDD Unit V Reference Current Iref µA Supply Current IDD µA Input Offset Voltage VIO mV Parameter Supply Voltage Min Typ 5 Max Condition 270 Unity Gain 10 Unity Gain, No Parasitics, delta L=0.1µm Unity Gain, No Parasitics, delta L=0.1µm 1.23 TK VIO Voltage Gain Transit Frequency Phasemargin 0.01% Settling Time Slew Rate Maximum Large Signal Frequency Output Swing TK(VIO) µV/K v fT Îm dB MHz S VOUT Static Nonlinearity Common Mode Range Common Mode Rejection Ratio Power Supply Rejection Ratio 15.13 98.9 8.42 ns V/µs 627 2.95 Amplitude = 0.5 V Amplitude = 0.5 V kHz 325 Amplitude = +/- 1.5V V -2.44 -2.4 ppm VCM V CMRR PSRR dB dB -2.25 -1.25 170.8 186.2 1.57 1.55 5 < 10 ppm < 5 ppm VDD = +5 V, Unity Gain CMRR > 54dB @ 10 Hz CMRR > 171dB @ 10 Hz f CM= 100 Hz, VCM = 0V f PS= 100 Hz