P6KE6V8(C)A - P6KE400(C)A 600W TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data • • • • • • • • • 600W Peak Pulse Power Dissipation Voltage Range 6.8V - 400V Constructed with Glass Passivated Die Uni- and Bidirectional Versions Available Excellent Clamping Capability Fast Response Time Lead Free Finish, RoHS Compliant (Note 1) Maximum Ratings • • • • • • Case: DO-15 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Leads: Plated Leads, Solderable per MIL-STD-202, Method 208 Marking: Unidirectional - Type Number and Cathode Band Marking: Bidirectional - Type Number Only Ordering Information: See Page 4 Weight: 0.4 grams (approximate) @TA = 25°C unless otherwise specified Characteristic Peak Power Dissipation, tp = 1.0 ms (Non repetitive current pulse, derated above TA = 25°C) Peak Forward Surge Current, 8.3ms Single Half Sine Wave, Superimposed on Rated Load Duty Cycle = 4 pulses per minute maximum Forward Voltage @ IF = 35A VBR ≤ 200V 300µs Square Wave Pulse, Unidirectional Only VBR > 200V Symbol Value Unit Ppk 600 W IFSM 100 A VF 3.5 5.0 V Symbol Value Unit PD 5.0 W RθJC RθJL RθJA TJ, TSTG 20 15 75 -55 to +175 °C/W °C/W °C/W °C Thermal Characteristics Characteristic Steady State Power Dissipation at TL = 75°C Lead Lengths 9.5 mm (Mounted on Copper Land Area of 40mm) Typical Thermal Resistance, Junction to Case Typical Thermal Resistance, Junction to Lead Typical Thermal Resistance, Junction to Ambient Operating and Storage Temperature Range Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. P6KE6V8(C)A - P6KE400(C)A Document number: DS21502 Rev. 18 - 2 1 of 5 www.diodes.com March 2010 © Diodes Incorporated P6KE6V8(C)A - P6KE400(C)A Electrical Characteristics @TA = 25°C unless otherwise specified Type Number (Note 2) Type Number (Note 2) Reverse Standoff Voltage (UNI) P6KE6V8A P6KE7V5A P6KE8V2A (BI) P6KE6V8CA P6KE7V5CA P6KE8V2CA VRWM (V) 5.80 6.40 7.02 Min (V) 6.45 7.13 7.79 Max (V) 7.14 7.88 8.61 IT (mA) 10 10 10 Max Reverse Leakage (Note 3) @ VR IR (μA) 1000 500 200 P6KE9V1A P6KE10A P6KE11A P6KE12A P6KE13A P6KE15A P6KE9V1CA P6KE10CA P6KE11CA P6KE12CA P6KE13CA P6KE15CA 7.78 8.55 9.40 10.20 11.10 12.80 8.65 9.50 10.50 11.40 12.40 14.30 9.55 10.50 11.60 12.60 13.70 15.80 1.0 1.0 1.0 1.0 1.0 1.0 P6KE16A P6KE18A P6KE20A P6KE22A P6KE24A P6KE27A P6KE30A P6KE16CA P6KE18CA P6KE20CA P6KE22CA P6KE24CA P6KE27CA P6KE30CA 13.60 15.30 17.10 18.80 20.50 23.10 25.60 15.20 17.10 19.00 20.90 22.80 25.70 28.50 16.80 18.90 21.00 23.10 25.20 28.40 31.50 P6KE33A P6KE36A P6KE39A P6KE43A P6KE47A P6KE51A P6KE33CA P6KE36CA P6KE39CA P6KE43CA P6KE47CA P6KE51CA 28.20 30.80 33.30 36.80 40.20 43.60 31.40 34.20 37.10 40.90 44.70 48.50 P6KE56A P6KE62A P6KE68A P6KE75A P6KE82A P6KE91A P6KE100A P6KE56CA P6KE62CA P6KE68CA P6KE75CA P6KE82CA P6KE91CA P6KE100CA 47.80 53.00 58.10 64.10 70.10 77.80 85.50 P6KE110A P6KE120A P6KE130A P6KE150A P6KE160A P6KE170A P6KE110CA P6KE120CA P6KE130CA P6KE150CA P6KE160CA P6KE170CA P6KE180A P6KE200A P6KE220A P6KE250A P6KE300A P6KE350A P6KE400A P6KE180CA P6KE200CA P6KE220CA P6KE250CA P6KE300CA P6KE350CA P6KE400CA Notes: Max Clamping Voltage @ Ipp Max Peak Pulse Current VC (V) 10.5 11.3 12.1 IPP (A) 57.0 53.0 50.0 50 10 5.0 5.0 5.0 5.0 13.4 14.5 15.6 16.7 18.2 21.2 45.0 41.0 38.0 36.0 33.0 28.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 22.5 25.2 27.7 30.6 33.2 37.5 41.4 27.0 24.0 22.0 20.0 18.0 16.0 14.40 34.70 37.80 41.00 45.20 49.40 53.60 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 5.0 5.0 5.0 5.0 45.7 49.9 53.9 59.3 64.8 70.1 13.20 12.00 11.20 10.10 9.30 8.60 53.20 58.90 64.60 71.30 77.90 86.50 95.00 58.80 65.10 71.40 78.80 86.10 95.50 105.00 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 77.0 85.0 92.0 103.0 113.0 125.0 137.0 7.80 7.10 6.50 5.80 5.30 4.80 4.40 94.00 102.00 111.00 128.00 136.00 145.00 105.00 114.00 124.00 143.00 152.00 162.00 116.00 126.00 137.00 158.00 168.00 179.00 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 5.0 5.0 5.0 5.0 152.0 165.0 179.0 207.0 219.0 234.0 4.00 3.60 3.30 2.90 2.70 2.60 154.00 171.00 185.00 214.00 256.00 300.00 342.00 171.00 190.00 209.00 237.00 285.00 332.00 380.00 189.00 210.00 231.00 263.00 315.00 368.00 420.00 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 2.40 2.20 1.83 1.75 1.45 1.25 1.10 Breakdown Voltage VBR @ IT Test Current 2. Suffix ‘C’ denotes bidirectional device. 3. For bidirectional devices having VR of 10 volts and under, the IR limit is doubled. P6KE6V8(C)A - P6KE400(C)A Document number: DS21502 Rev. 18 - 2 2 of 5 www.diodes.com March 2010 © Diodes Incorporated P6KE6V8(C)A - P6KE400(C)A 10,000 Tj = 25°C f = 1.0 MHz Vsig = 50mV p-p CT, CAPACITANCE (pF) IP, PEAK PULSE CURRENT (%pp) Measured at Zero Bias 1,000 Measured at Stand-off Voltage 100 10 1 t, TIME (ms) Fig. 1 Pulse Waveform 100 PEAK PULSE DERATING (% PEAK POWER OR CURRENT) 100 Impulse PP, PEAK PULSE POWER (kW) 10 100 1,000 VRWM, REVERSE STANDOFF VOLTAGE (V) Fig. 2 Typical Total Capacitance 10 1.0 75 50 25 10 X 1000 Waveform as defined by REA TC = 25°C 0.1 10 1.0 100 1,000 0 10,000 5.0 0 IFSM, PEAK FORWARD SURGE CURRENT (A) Pd , STEADY STATE POWER DISSIPATION (W) 0.1 Single phase half-wave 60Hz resistive or inductive load 3.75 2.5 1.25 25 50 75 100 125 150 175 200 TL , LEAD TEMPERATURE (°C) Fig. 5, Steady State Power Derating P6KE6V8(C)A - P6KE400(C)A Document number: DS21502 Rev. 18 - 2 200 1,000 0 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Fig. 4 Pulse Derating Curve 100 10 0 1 10 100 200 NUMBER OF CYCLES AT 60Hz Fig. 6 Peak Forward Surge Current vs. Number of Cycles at 60Hz 3 of 5 www.diodes.com March 2010 © Diodes Incorporated P6KE6V8(C)A - P6KE400(C)A Ordering Information (Note 4) Part Number (Type Number)-B* (Type Number)-T* Case DO-15 DO-15 Packaging 500/Bulk 4K/Tape & Reel, 13-inch * Add "-B" or "-T" to the appropriate type number in Table 1 for Bulk or Tape & Reel, respectively. Example: 6.40V VRWM = P6KE7V5A-B for Bulk, P6KE7V5A-T for Tape & Reel. Notes: 4. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02008.pdf. Package Outline Dimensions Dim A B C D P6KE6V8(C)A - P6KE400(C)A Document number: DS21502 Rev. 18 - 2 4 of 5 www.diodes.com DO-15 Min Max 25.40 ⎯ 5.50 7.62 0.686 0.889 2.60 3.60 All Dimensions in mm March 2010 © Diodes Incorporated P6KE6V8(C)A - P6KE400(C)A IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com P6KE6V8(C)A - P6KE400(C)A Document number: DS21502 Rev. 18 - 2 5 of 5 www.diodes.com March 2010 © Diodes Incorporated