LSI44929 2 Gbit Fibre Channel Host Adapter KEY APPLICATIONS • Pedestal and rackable servers • Workstations • Storage Area Networks (SANs) • Remote storage attach • Cluster environments • RAID • JBOD connect FEATURES • Two independent, 2 Gbit channels (up to 400 MBps, full duplex) • Low profile PCI form factor • Auto-negotiation for legacy connect (1or 2 Gbit) INCREASE PERFORMANCE IN YOUR ENTERPRISE AND RACK MOUNT SERVERS When needing a new level of reliability, speed and distance in interconnect technology, try one of the LSI Logic’s LSI44929 Fibre Channel MiniHAB™ products. These Dual Channel, 2 Gbit PCI-to-Fibre Channel host adapters are designed in a Low Profile PCI form factor making them the right choice for 1U and 2U rackmount and standard servers, while providing the performance needed for enterprise applications. These adapters save valuable PCI slots and offer increased connectivity by providing two independent fibre channels on one host adapter for clustered or SAN environments. • Multi-mode optics and copper options The LSI44929 MiniHAB adapters host the LSIFC929, PCI-to-Dual Channel Fibre Channel controller. The LSIFC929 connects directly to a 64-bit/66 MHz PCI bus presenting one electrical load. The host PCI interface is PCI 2.2 compliant and is backwards compatible with 32-bit and 33 MHz buses. • Concurrent SCSI and IP protocol LSI44929 ORDERING INFORMATION • 64-bit, 66 MHz host PCI bus (backwards compatible with 32-bit and 33 MHz buses) • Supports target mode and SCSI initiator, concurrently LSI44929O Standard height bracket, LC, SFF, multi-mode optics LSI44929LO Low profile bracket, LC, SFF, multi-mode optics • FC-Tape support LSI44929H Standard height bracket, HSSDC, copper • CIM based server management LSI44929LH Low profile bracket, HSSDC, copper • Supports all major operating systems • Fusion-MPT™ architected • SANmark™ approved • 5 year limited warranty • SNIA HBA API compliant NOTE: Switch, loop, and point-to-point topologies are supported. LSI44929 2 Gbit Fibre Channel Host Adapter FUSION-MPT ARCHITECTURE ® Based on industry standard ARM technology, the LSI Logic 2 Gbit product family incorporates Fusion-MPT architecture, a single binary device driver for Fibre Channel, SCSI and emerging interface technologies such as InfiniBand, Serial ATA and others. Thinner drivers allow for better and more versatile performance while adding value at the firmware level. Fusion-MPT provides the flexibility and rich feature set to make options like Integrated Mirroring possible for boot volume protection at no additional cost. For more information please visit the LSI Logic web site at: http://storageio.lsilogic.com LSI Logic Corporation North American Headquarters Milpitas, CA Tel: 866 574 5741 Host Adapters Group Southborough, MA Technical Specifications Data Transfers 400 MBps per channel, full-duplex Tel: 888 429 0425 Protocols SCSI, IP FAX: 508 485 0303 Topology Point-to-point, arbitrated loop, switched fabric (FL-port, F-port) Class of Service Class 2, Class 3 Compliance ANSI Fibre Channel Standards: FC-PH, FC-AL2, FC-FCP, FC-PLDA, FC-FLA, FCA-IP, IETF-IPFC, FC-Tape PCI 2.2 and 99 compliant LSI Logic Europe Ltd. European Headquarters United Kingdom Tel: 44 1344 426544 Size 6.6” x 2.53” PCI Form Factor Low profile, PCI 2.2, MD2 PCI Bus 64-bit, 66 MHz max (backwards compatible with 32-bit, 33 MHz buses) LSI Logic KK Headquarters PCI Modes Bus Master DMA Tokyo, Japan PCI Card Types Universal add-in card (3.3 V and 5.5 V signaling) Tel: 81 3 5463 7165 PCI Voltage +5 V ±5% Fax 81 3 5463 7820 PCI Power 7.5 W Bracket Standard height and low profile option External Connectors LC, multi-mode optics, SFF, HSSDC, copper Agency Approvals CE, VCCI, Canada, C-Tick, FCC class B, UL 94VO Environments Operating Storage Temperature 0°C to 55°C -40°C to +85°C Relative Humidity 5 to 90% non-condensing 0 to 90% non-condensing Max Dew Point +32°C Fax: 44 1344 481039 ISO 9001 Certified The LSI Logic logo design and Fusion-MPT are trademarks or registered trademarks of LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies. LSI Logic Corporation reserves the right to make changes to any products and services herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase, lease, or use of a product or service from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or of third parties. Copyright ©2002 by LSI Logic Corporation. All rights reserved. Order No. S20059 2/02-1M – Printed in USA 2