DSEP 2x 61-12A HiPerFREDTM Epitaxial Diode IFAV = 2x 60 A VRRM = 1200 V = 40 ns trr with soft recovery VRSM VRRM V V 1200 1200 miniBLOC, SOT-227 B Type DSEP 2x 61-12A Symbol Conditions Maximum Ratings IFRMS IFAVM TC = 80°C; rectangular, d = 0.5 100 60 A A IFSM TVJ = 45°C; tp = 10 ms (50 Hz), sine 800 A EAS TVJ = 25°C; non-repetitive IAS = 16 A; L = 180 µH 28 mJ IAR VA = 1.25·VR typ.; f = 10 kHz; repetitive 1.6 A -40...+150 150 -40...+150 °C °C °C 200 W 2500 V~ TVJ TVJM Tstg Features l l l l l l l Ptot TC = 25°C VISOL 50/60 Hz, RMS IISOL ≤ 1 mA Md mounting torque (M4) terminal connection torque (M4) Weight typical 1.1-1.5/9-13 1.1-1.5/9-13 Nm/lb.in. Nm/lb.in. 30 l l Applications l g l l Symbol IR ¬ VF Conditions Characteristic Values typ. max. TVJ = 25°C VR = VRRM TVJ = 150°C VR = VRRM IF = 60 A; 1 4 TVJ = 125°C TVJ = 25°C RthJC RthCH mA mA 1.70 2.42 V V 0.6 0.1 K/W K/W trr IF = 1 A; -di/dt = 400 A/µs; VR = 30 V; TVJ = 25°C 40 ns IRM VR = 100 V; IF = 200 A; -diF/dt = 100 A/µs TVJ = 100°C 8 A Pulse test: ¬ Pulse Width = 5 ms, Duty Cycle < 2.0 % Pulse Width = 300 µs, Duty Cycle < 2.0 % International standard package miniBLOC Isolation voltage 2500 V~ UL registered E 72873 2 independent FRED in 1 package Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour l l l l l Antiparallel diode for high frequency switching devices Antisaturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages l l l Avalanche voltage rated for reliable operation Soft reverse recovery for low EMI/RFI Low IRM reduces: - Power dissipation within the diode - Turn-on loss in the commutating switch Dimensions see pages D4 - 85-86 IXYS reserves the right to change limits, test conditions and dimensions. © 2000 IXYS All rights reserved 912 Data according to IEC 60747 and per diode unless otherwise specified D 4 - 81 DSEP 2x 61-12A Preliminary Data 15.0 100 120 T = 100°C C VVJ= 600V R A A 12.5 Qr 80 IF TVJ=150°C TVJ=100°C TVJ= 25°C 60 IRM 80 10.0 IF= 120A IF= 60A IF= 30A IF= 120A IF= 60A IF= 30A 7.5 40 5.0 20 TVJ= 100°C VR = 600V 40 2.5 0 0 1 2 VF V 0.0 100 3 Fig. 1 Forward current IF versus VF Fig. 2 Reverse recovery charge Qr versus -diF/dt 2.0 300 trr 0 200 400 s 1000 600 A/ 800 -diF/dt Fig. 3 Peak reverse current IRM versus -diF/dt 60 TVJ= 100°C VR = 600V ns 1.5 0 A/s 1000 -diF/dt 1.2 V 280 VFR Kf µs VFR tfr tfr 40 0.8 20 0.4 260 1.0 IRM IF= 120A IF= 60A IF= 30A 240 0.5 220 Qr 0.0 200 0 40 80 120 °C 160 0 200 TVJ 400 800 A/ s 1000 600 TVJ= 100°C IF = 60A 0 0 200 400 -diF/dt Fig. 4 Dynamic parameters Qr, IRM versus TVJ Fig. 5 Recovery time trr versus -diF/dt 1 0.0 s 1000 600 A/ 800 diF/dt Fig. 6 Peak forward voltage VFR and tfr versus diF/dt Constants for ZthJC calculation: K/W i 0.1 1 2 3 4 ZthJC 0.01 Rthi (K/W) ti (s) 0.212 0.248 0.063 0.077 0.0055 0.0092 0.0007 0.0391 0.001 0.0001 0.00001 DSEP 2x61-12A 0.0001 0.001 0.01 0.1 s 1 10 t 912 Fig. 7 Transient thermal resistance junction to case NOTE: Fig. 2 to Fig. 6 shows typical values D 4 - 82 © 2000 IXYS All rights reserved