ETC NL74VCX16245DTR2

NL74VCX16245
Low-Voltage 1.8/2.5/3.3V
16-Bit Transceiver
With 3.6V–Tolerant Inputs and Outputs
(3–State, Non–Inverting)
The NL74VCX16245 is an advanced performance, non–inverting
16–bit transceiver. It is designed for very high–speed, very low–power
operation in 1.8V, 2.5V or 3.3V systems.
When operating at 2.5V (or 1.8V) the part is designed to tolerate
voltages it may encounter on either inputs or outputs when interfacing
to 3.3V busses. It is guaranteed to be over–voltage tolerant to 3.6V.
The VCX16245 is designed with byte control. It can be operated as
two separate octals, or with the controls tied together, as a 16–bit wide
function. The Transmit/Receive (T/Rn) inputs determine the direction
of data flow through the bi–directional transceiver. Transmit
(active–HIGH) enables data from A ports to B ports; Receive
(active–LOW) enables data from B to A ports. The Output Enable
inputs (OEn), when HIGH, disable both A and B ports by placing them
in a HIGH Z condition.
http://onsemi.com
48
1
TSSOP–48
DT SUFFIX
CASE 1201
MARKING DIAGRAM
48
• Designed for Low Voltage Operation: VCC = 1.65–3.6V
• 3.6V Tolerant Inputs and Outputs
• High Speed Operation: 2.5ns max for 3.0 to 3.6V
•
•
•
•
•
•
NL74VCX16245DT
AWLYYWW
3.0ns max for 2.3 to 2.7V
6.0ns max for 1.65 to 1.95V
Static Drive: ±24mA Drive at 3.0V
±18mA Drive at 2.3V
±6mA Drive at 1.65V
Supports Live Insertion and Withdrawal
IOFF Specification Guarantees High Impedance When VCC = 0V
Near Zero Static Supply Current in All Three Logic States (20µA)
Substantially Reduces System Power Requirements
Latchup Performance Exceeds ±300mA @ 125°C
ESD Performance: Human Body Model >2000V; Machine Model
>200V
1
A
WL
YY
WW
= Assembly Location
= Wafer Lot
= Year
= Work Week
PIN NAMES
Pins
Function
OEn
T/Rn
A0–A15
B0–B15
Output Enable Inputs
Transmit/Receive Inputs
Side A Inputs or 3–State Outputs
Side B Inputs or 3–State Outputs
ORDERING INFORMATION
Device
 Semiconductor Components Industries, LLC, 2000
May, 2000 – Rev. 0
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1
Package
Shipping
NL74VCX16245DT
TSSOP
39 / Rail
NL74VCX16245DTR2
TSSOP
2500 / Reel
Publication Order Number:
NL74VCX16245/D
NL74VCX16245
1
T/R1 1
48 OE1
B0 2
47 A0
B1 3
46 A1
GND 4
44 A2
B3 6
43 A3
OE1
48
OE2
25
A0:7
B0:7
A8:15
B8:15
42 VCC
B4 8
41 A4
B5 9
40 A5
GND 10
T/R2
45 GND
B2 5
VCC 7
24
T/R1
One of Eight
39 GND
B6 11
38 A6
B7 12
37 A7
B8 13
36 A8
B9 14
35 A9
GND 15
34 GND
B10 16
33 A10
B11 17
32 A11
VCC 18
31 VCC
B12 19
30 A12
B13 20
29 A13
GND 21
28 GND
B14 22
27 A14
B15 23
26 A15
T/R2 24
25 OE2
Figure 2. Logic Diagram
1
EN1
EN2
EN3
EN4
T/R1
48
OE1
25
OE2
24
T/R2
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
Figure 1. 48–Lead Pinout
(Top View)
Inputs
47
1
46
1∇
2
3
5
44
43
41
1
2∇
6
8
40
9
38
11
37
36
1
3∇
12
13
35
14
33
16
32
30
1
4∇
17
19
29
20
27
22
26
23
B0
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B15
Inputs
OE1
T/R1
L
L
L
H
O tp ts
Outputs
O tp ts
Outputs
OE2
T/R2
Bus B0:7 Data to Bus A0:7
L
L
Bus B8:15 Data to Bus A8:15
H
Bus A0:7 Data to Bus B0:7
L
H
Bus A8:15 Data to Bus B8:15
X
High Z State on A0:7, B0:7
H
X
High Z State on A8:15, B8:15
H = High Voltage Level; L = Low Voltage Level; X = High or Low Voltage Level and Transitions Are Acceptable
http://onsemi.com
2
Powered by ICminer.com Electronic-Library Service CopyRight 2003
NL74VCX16245
ABSOLUTE MAXIMUM RATINGS*
Symbol
Parameter
VCC
DC Supply Voltage
VI
VO
Value
Condition
Unit
–0.5 to +4.6
V
DC Input Voltage
–0.5 ≤ VI ≤ +4.6
V
DC Output Voltage
–0.5 ≤ VO ≤ +4.6
Output in 3–State
V
–0.5 ≤ VO ≤ VCC + 0.5
Note 1.; Outputs Active
V
IIK
DC Input Diode Current
–50
VI < GND
mA
IOK
DC Output Diode Current
–50
VO < GND
mA
+50
VO > VCC
mA
IO
DC Output Source/Sink Current
±50
mA
ICC
DC Supply Current Per Supply Pin
±100
mA
IGND
DC Ground Current Per Ground Pin
±100
mA
TSTG
Storage Temperature Range
–65 to +150
°C
* Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or
conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute–maximum–rated conditions
is not implied.
1. IO absolute maximum rating must be observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Operating
Data Retention Only
Min
Typ
Max
Unit
1.65
1.2
3.3
3.3
3.6
3.6
V
–0.3
3.6
V
0
0
VCC
3.6
V
VCC
Supply Voltage
VI
Input Voltage
VO
Output Voltage
IOH
HIGH Level Output Current, VCC = 3.0V – 3.6V
–24
mA
IOL
LOW Level Output Current, VCC = 3.0V – 3.6V
24
mA
IOH
HIGH Level Output Current, VCC = 2.3V – 2.7V
–18
mA
IOL
LOW Level Output Current, VCC = 2.3V – 2.7V
18
mA
IOH
HIGH Level Output Current, VCC = 1.65 – 1.95V
–6
mA
IOL
LOW Level Output Current, VCC = 1.65 – 1.95V
6
mA
TA
Operating Free–Air Temperature
–40
+85
°C
∆t/∆V
Input Transition Rise or Fall Rate, VIN from 0.8V to 2.0V, VCC = 3.0V
0
10
ns/V
(Active State)
(3–State)
http://onsemi.com
3
Powered by ICminer.com Electronic-Library Service CopyRight 2003
NL74VCX16245
DC ELECTRICAL CHARACTERISTICS
TA = –40°C to +85°C
Symbol
VIH
VIL
VOH
VOL
Characteristic
HIGH Level Input Voltage (Note 2.)
LOW Level Input Voltage (Note 2.)
HIGH Level Output Voltage
LOW Level Output Voltage
Condition
Min
Max
1.65V ≤ VCC < 2.3V
0.65 x VCC
2.3V ≤ VCC ≤ 2.7V
1.6
2.7V < VCC ≤ 3.6V
2.0
V
1.65V ≤ VCC < 2.3V
0.35 x VCC
2.3V ≤ VCC ≤ 2.7V
0.7
2.7V < VCC ≤ 3.6V
0.8
1.65V ≤ VCC ≤ 3.6V; IOH = –100µA
VCC – 0.2
VCC = 1.65V; IOH = –6mA
1.25
VCC = 2.3V; IOH = –6mA
2.0
VCC = 2.3V; IOH = –12mA
1.8
VCC = 2.3V; IOH = –18mA
1.7
VCC = 2.7V; IOH = –12mA
2.2
VCC = 3.0V; IOH = –18mA
2.4
VCC = 3.0V; IOH = –24mA
2.2
Unit
V
V
1.65V ≤ VCC ≤ 3.6V; IOL = 100µA
0.2
VCC = 1.65V; IOL = 6mA
0.3
VCC = 2.3V; IOL = 12mA
VCC = 2.3V; IOL = 18mA
0.4
VCC = 2.7V; IOL = 12mA
0.4
VCC = 3.0V; IOL = 18mA
0.4
V
0.6
VCC = 3.0V; IOL = 24mA
0.55
II
Input Leakage Current
1.65V ≤ VCC ≤ 3.6V; 0V ≤ VI ≤ 3.6V
±5.0
µA
IOZ
3–State Output Current
1.65V ≤ VCC ≤ 3.6V; 0V ≤ VO ≤ 3.6V;
VI = VIH or VIL
±10
µA
IOFF
ICC
Power–Off Leakage Current
VCC = 0V; VI or VO = 3.6V
10
µA
1.65V ≤ VCC ≤ 3.6V; VI = GND or VCC
20
µA
1.65V ≤ VCC ≤ 3.6V; 3.6V ≤ VI, VO ≤ 3.6V
±20
µA
750
µA
Quiescent Supply Current (Note 3.)
∆ICC
Increase in ICC per Input
2.7V < VCC ≤ 3.6V; VIH = VCC – 0.6V
2. These values of VI are used to test DC electrical characteristics only.
3. Outputs disabled or 3–state only.
AC CHARACTERISTICS (Note 4.; tR = tF = 2.0ns; CL = 30pF; RL = 500Ω)
Limits
TA = –40°C to +85°C
VCC = 3.0V to 3.6V
Symbol
Parameter
VCC = 2.3V to 2.7V
VCC = 1.65 to1.95V
Waveform
Min
Max
Min
Max
Min
Max
Unit
tPLH
tPHL
Propagation Delay
Input to Output
1
0.8
0.8
2.5
2.5
1.0
1.0
3.0
3.0
1.5
1.5
6.0
6.0
ns
tPZH
tPZL
Output Enable Time to
High and Low Level
2
0.8
0.8
3.8
3.8
1.0
1.0
4.9
4.9
1.5
1.5
9.3
9.3
ns
tPHZ
tPLZ
Output Disable Time From
High and Low Level
2
0.8
0.8
3.7
3.7
1.0
1.0
4.2
4.2
1.5
1.5
7.6
7.6
ns
tOSHL
tOSLH
Output–to–Output Skew
(Note 5.)
0.75
0.75
ns
0.5
0.5
0.5
0.5
4. For CL = 50pF, add approximately 300ps to the AC maximum specification.
5. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device.
The specification applies to any outputs switching in the same direction, either HIGH–to–LOW (tOSHL) or LOW–to–HIGH (tOSLH); parameter
guaranteed by design.
http://onsemi.com
4
Powered by ICminer.com Electronic-Library Service CopyRight 2003
NL74VCX16245
DYNAMIC SWITCHING CHARACTERISTICS
TA = +25°C
Symbol
VOLP
VOLV
VOHV
Condition
Typ
Unit
Dynamic LOW Peak Voltage
Characteristic
VCC = 1.8V, CL = 30pF, VIH = VCC, VIL = 0V
0.25
V
(Note 6.)
VCC = 2.5V, CL = 30pF, VIH = VCC, VIL = 0V
0.6
VCC = 3.3V, CL = 30pF, VIH = VCC, VIL = 0V
0.8
Dynamic LOW Valley Voltage
VCC = 1.8V, CL = 30pF, VIH = VCC, VIL = 0V
–0.25
(Note 6.)
VCC = 2.5V, CL = 30pF, VIH = VCC, VIL = 0V
–0.6
VCC = 3.3V, CL = 30pF, VIH = VCC, VIL = 0V
–0.8
Dynamic HIGH Valley Voltage
VCC = 1.8V, CL = 30pF, VIH = VCC, VIL = 0V
1.5
(Note 7.)
VCC = 2.5V, CL = 30pF, VIH = VCC, VIL = 0V
1.9
V
V
VCC = 3.3V, CL = 30pF, VIH = VCC, VIL = 0V
2.2
6. Number of outputs defined as “n”. Measured with “n–1” outputs switching from HIGH–to–LOW or LOW–to–HIGH. The remaining output is
measured in the LOW state.
7. Number of outputs defined as “n”. Measured with “n–1” outputs switching from HIGH–to–LOW or LOW–to–HIGH. The remaining output is
measured in the HIGH state.
CAPACITIVE CHARACTERISTICS
Symbol
Parameter
Condition
Typical
Unit
CIN
Input Capacitance
Note 8.
6
pF
COUT
Output Capacitance
Note 8.
7
pF
CPD
Power Dissipation Capacitance
Note 8., 10MHz
20
pF
8. VCC = 1.8, 2.5 or 3.3V; VI = 0V or VCC.
http://onsemi.com
5
Powered by ICminer.com Electronic-Library Service CopyRight 2003
NL74VCX16245
VIH
Vm
An, Bn
Vm
0V
tPLH
tPHL
Vm
Bn, An
VOH
Vm
VOL
WAVEFORM 1 – PROPAGATION DELAYS
tR = tF = 2.0ns, 10% to 90%; f = 1MHz; tW = 500ns
VIH
Vm
OEn, T/Rn
Vm
0V
tPZH
tPHZ
VOH
Vy
Vm
An, Bn
≈ 0V
tPZL
tPLZ
≈ VCC
Vm
An, Bn
Vx
VOL
WAVEFORM 2 – OUTPUT ENABLE AND DISABLE TIMES
tR = tF = 2.0ns, 10% to 90%; f = 1MHz; tW = 500ns
Figure 3. AC Waveforms
VCC
Symbol
3.3V ±0.3V
2.5V ±0.2V
1.8V ±0.15V
VIH
2.7V
VCC
VCC
Vm
1.5V
VCC/2
VCC/2
Vx
VOL + 0.3V
VOL + 0.15V
VOL + 0.15V
Vy
VOH – 0.3V
VOH – 0.15V
VOH – 0.15V
VCC
PULSE
GENERATOR
RL
DUT
RT
CL
TEST
RL
SWITCH
tPLH, tPHL
Open
tPZL, tPLZ
6V at VCC = 3.3 ±0.3V;
VCC× 2 at VCC = 2.5 ±0.2V; 1.8V ±0.15V
tPZH, tPHZ
GND
CL = 30pF or equivalent (Includes jig and probe capacitance)
RL = 500Ω or equivalent
RT = ZOUT of pulse generator (typically 50Ω)
Figure 4. Test Circuit
http://onsemi.com
6
Powered by ICminer.com Electronic-Library Service CopyRight 2003
6V or VCC × 2
OPEN
GND
NL74VCX16245
VIH
Vm
An, Bn
Vm
0V
tPLH
tPHL
Vm
Bn, An
VOH
Vm
VOL
WAVEFORM 3 – PROPAGATION DELAYS
tR = tF = 2.0ns, 10% to 90%; f = 1MHz; tW = 500ns
VIH
Vm
OEn, T/Rn
Vm
0V
tPZH
tPHZ
VOH
Vy
Vm
An, Bn
≈ 0V
tPZL
tPLZ
≈ VCC
Vm
An, Bn
Vx
VOL
WAVEFORM 4 – OUTPUT ENABLE AND DISABLE TIMES
tR = tF = 2.0ns, 10% to 90%; f = 1MHz; tW = 500ns
Figure 5. AC Waveforms
VCC
Symbol
3.3V ±0.3V
2.7V
VIH
2.7V
2.7V
Vm
1.5V
1.5V
Vx
VOL + 0.3V
VOL + 0.3V
Vy
VOH – 0.3V
VOH – 0.3V
VCC
PULSE
GENERATOR
RL
DUT
RT
CL
TEST
RL
SWITCH
tPLH, tPHL
Open
tPZL, tPLZ
6V at VCC = 3.3 ±0.3V;
VCC × 2 at VCC = 2.5 ±0.2V; 1.8 ±0.15V
tPZH, tPHZ
GND
CL = 50pF or equivalent (Includes jig and probe capacitance)
RL = 500Ω or equivalent
RT = ZOUT of pulse generator (typically 50Ω)
Figure 6. Test Circuit
http://onsemi.com
7
Powered by ICminer.com Electronic-Library Service CopyRight 2003
6V or VCC × 2
OPEN
GND
NL74VCX16245
AC CHARACTERISTICS (tR = tF = 2.0ns; CL = 50pF; RL = 500Ω)
Limits
TA = –40°C to +85°C
VCC = 3.0V to 3.6V
Symbol
Parameter
VCC = 2.7V
Waveform
Min
Max
Max
Unit
tPLH
tPHL
Propagation Delay
Input to Output
3
1.0
1.0
3.0
3.0
Min
3.6
3.6
ns
tPZH
tPZL
Output Enable Time to
High and Low Level
4
1.0
1.0
4.4
4.4
5.4
5.4
ns
tPHZ
tPLZ
Output Disable Time From
High and Low Level
4
1.0
1.0
4.1
4.1
4.6
4.6
ns
tOSHL
tOSLH
Output–to–Output Skew
(Note 9.)
0.5
0.5
0.5
0.5
ns
9. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device.
The specification applies to any outputs switching in the same direction, either HIGH–to–LOW (tOSHL) or LOW–to–HIGH (tOSLH); parameter
guaranteed by design.
http://onsemi.com
8
Powered by ICminer.com Electronic-Library Service CopyRight 2003
NL74VCX16245
PACKAGE DIMENSIONS
TSSOP
DT SUFFIX
CASE 1201–01
ISSUE A
48X
ÉÉÉ
ÇÇÇ
ÇÇÇ
ÉÉÉ
ÇÇÇ
ÉÉÉ
K
K1
K REF
0.12 (0.005)
M
T U
S
V
S
T U
S
J J1
48
25
SECTION N–N
M
0.254 (0.010)
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS OR GATE
BURRS. MOLD FLASH OR GATE BURRS
SHALL NOT EXCEED 0.15 (0.006) PER SIDE.
4. DIMENSION K DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN
EXCESS OF THE K DIMENSION AT MAXIMUM
MATERIAL CONDITION.
5. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
6. DIMENSIONS A AND B ARE TO BE
DETERMINED AT DATUM PLANE –W–.
B
–U–
L
N
1
24
A
–V–
PIN 1
IDENT.
N
F
DETAIL E
D
C
0.25 (0.010)
–W–
0.076 (0.003)
–T– SEATING
DETAIL E
PLANE
MILLIMETERS
MIN
MAX
12.40
12.60
6.00
6.20
–––
1.10
0.05
0.15
0.50
0.75
0.50 BSC
0.37
–––
0.09
0.20
0.09
0.16
0.17
0.27
0.17
0.23
7.95
8.25
0_
8_
H
G
ÉÉ
ÉÉ
ÉÉ
É
ÉÉ
É
ÉÉ
ÉÉ
ÉÉ
É
ÉÉ
É
ÉÉ
ÉÉÉÉÉÉÉÉ
ÉÉ
ÉÉ
ÉÉ
É
ÉÉ
É
ÉÉ
ÉÉÉÉÉÉÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
É
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
É
ÉÉ
ÉÉÉÉ
ÉÉÉÉÉÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
É
ÉÉ
ÉÉÉÉ
ÉÉÉÉÉÉÉ
F
K
L
M
DIM
A
B
C
D
F
G
H
J
J1
K
K1
L
M
G
48 Leads
Package Footprint
http://onsemi.com
9
Powered by ICminer.com Electronic-Library Service CopyRight 2003
INCHES
MIN
MAX
0.488
0.496
0.236
0.244
–––
0.043
0.002
0.006
0.020
0.030
0.0197 BSC
0.015
–––
0.004
0.008
0.004
0.006
0.007
0.011
0.007
0.009
0.313
0.325
0_
8_
NL74VCX16245
10 PITCHES
CUMULATIVE
TOLERANCE ON
TAPE
±0.2 mm
(±0.008”)
P0
K
P2
D
t
TOP
COVER
TAPE
E
A0
+
K0
SEE
NOTE 2
B1
SEE NOTE 2
F
+
B0
W
+
D1
FOR COMPONENTS
2.0 mm × 1.2 mm
AND LARGER
P
EMBOSSMENT
FOR MACHINE REFERENCE
ONLY
INCLUDING DRAFT AND RADII
CONCENTRIC AROUND B0
CENTER LINES
OF CAVITY
USER DIRECTION OF FEED
*TOP COVER
TAPE THICKNESS (t1)
0.10 mm
(0.004”) MAX.
R MIN.
TAPE AND COMPONENTS
SHALL PASS AROUND RADIUS “R”
WITHOUT DAMAGE
EMBOSSED
CARRIER
BENDING RADIUS
10°
100 mm
(3.937”)
MAXIMUM COMPONENT ROTATION
EMBOSSMENT
1 mm MAX
TYPICAL
COMPONENT CAVITY
CENTER LINE
TAPE
1 mm
(0.039”) MAX
TYPICAL
COMPONENT
CENTER LINE
250 mm
(9.843”)
CAMBER (TOP VIEW)
ALLOWABLE CAMBER TO BE 1 mm/100 mm NONACCUMULATIVE OVER 250 mm
Figure 7. Carrier Tape Specifications
EMBOSSED CARRIER DIMENSIONS (See Notes 1 and 2)
Tape
Size
B1
Max
24mm
20.1mm
(0.791”)
D
D1
E
F
K
P
P0
P2
R
T
W
1.5 + 0.1mm
–0.0
(0.059
+0.004” –0.0)
1.5mm
Min
(0.060”)
1.75
±0.1 mm
(0.069
±0.004”)
11.5
±0.10 mm
(0.453
±0.004”)
11.9 mm
Max
(0.468”)
16.0
±0.1 mm
(0.63
±0.004”)
4.0
±0.1 mm
(0.157
±0.004”)
2.0
±0.1 mm
(0.079
±0.004”)
30 mm
(1.18”)
0.6 mm
(0.024”)
24.3 mm
(0.957”)
1. Metric Dimensions Govern–English are in parentheses for reference only.
2. A0, B0, and K0 are determined by component size. The clearance between the components and the cavity must be within 0.05 mm min to
0.50 mm max. The component cannot rotate more than 10° within the determined cavity
http://onsemi.com
10
Powered by ICminer.com Electronic-Library Service CopyRight 2003
NL74VCX16245
t MAX
13.0 mm ±0.2 mm
(0.512” ±0.008”)
1.5 mm MIN
(0.06”)
A
20.2 mm MIN
(0.795”)
50 mm MIN
(1.969”)
FULL RADIUS
G
Figure 8. Reel Dimensions
REEL DIMENSIONS
Tape Size
A Max
G
t Max
24 mm
360 mm
(14.173”)
24.4 mm + 2.0 mm, –0.0
(0.961” + 0.078”, –0.00)
30.4 mm
(1.197”)
DIRECTION OF FEED
BARCODE LABEL
POCKET
Figure 9. Reel Winding Direction
http://onsemi.com
11
Powered by ICminer.com Electronic-Library Service CopyRight 2003
HOLE
NL74VCX16245
CAVITY
TAPE
TOP TAPE
TAPE TRAILER
(Connected to Reel Hub)
NO COMPONENTS
160 mm MIN
COMPONENTS
TAPE LEADER
NO COMPONENTS
400 mm MIN
DIRECTION OF FEED
Figure 10. Tape Ends for Finished Goods
User Direction of Feed
Figure 11. Reel Configuration
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: [email protected]
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (M–F 1:00pm to 5:00pm Munich Time)
Email: ONlit–[email protected]
French Phone: (+1) 303–308–7141 (M–F 1:00pm to 5:00pm Toulouse Time)
Email: ONlit–[email protected]
English Phone: (+1) 303–308–7142 (M–F 12:00pm to 5:00pm UK Time)
Email: [email protected]
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, England, Ireland
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–[email protected]
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–[email protected]
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–8549
Phone: 81–3–5740–2745
Email: [email protected]
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
http://onsemi.com
12
Powered by ICminer.com Electronic-Library Service CopyRight 2003
NL74VCX16245/D