Series D2W 2-3.5 Amps • 120/240 V ac • AC Output SIP • • • • Triac Output Printed Circuit Board M ount Internal Snubber Zero Voltage Sw itching The D2W Series features an epoxycoated package that provides exceptional environmental protection. Pinouts are compatible with Series 6 and OAC type I/O modules. Manufactured in Crydom's ISO 9001 Certified facility for optimum product performance and reliability. CURRENT DERATING CURVE LOAD CURRENT (AMPS) 3.5 D2W203F-11 3.0 D2W202F D2W203F D2W203F-11 Control Voltage Range 3-32 Vdc 3-32 Vdc 3-32 Vdc Nominal Input Impedance 1500 Ohm 1500 Ohm 1500 Ohm Typical Input Current @ 5 Vdc 3.0 mAdc 3.0 mAdc 3.0 mAdc D2W203F 2.5 2.0 MODEL NO. INPUT SPECIFICATIONS ➀ D2W202F Must Turn On Voltage 3.0 Vdc 3.0 Vdc 3.0 Vdc 1.5 Must Turn Off Voltage 1.0 Vdc 1.0 Vdc 1.0 Vdc 1.0 OUTPUT SPECIFICATIONS ➀ 0.5 Operating Voltage Range (47-63 Hz) 24-280 Vrms 24-280 Vrms 24-280 Vrms Load Current Range .06-2.0 Arms .06-3.0 Arms .06-3.5 Arms Transient Over-Voltage 600 Vpk 600 Vpk 600 Vpk Max. Surge Current, (16.6ms) 28 Apk 70 Apk 80 Apk 200 V/µsec 200 V/µsec 200 V/µsec Max.Off-State Leakage @ Rated Voltage 8 mArms 8 mArms 8 mArms Max. On-State Voltage Drop @ Rated Current 1.4 Vpk 1.4 Vpk 1.4 Vpk Max.Turn-On Time 1/2 cycle 1/2 cycle 1/2 cycle Max. Turn-Off TIme 1/2 cycle 1/2 cycle 1/2 cycle 0.5 0.5 20 40 60 80 AMBIENT TEMPERTURE (¼C) Max. Load Current vs. Temp. Min. Off-State dv/dt @ Max. Rated Voltage .47 MAX. (11.9) 1.18 MAX. (29.9) CONTROL ➂ LOAD Power Factor (Min.) WIth Max. Load .39 TYP. (9.9) .200 (5.1) 4 3 .700 (17.8) 2 1 1.100 (27.9) 1: 2: 3: 4: AC LOAD AC LOAD +DC CONTROL -DC CONTROL All dimensions are in inches (millimeters) Dielectric Strength ➁ ➁ 109 Ohm 10 pF Max. Capacitance Ambient Operating Temperature Range Ambient Storage Temperature Range -30 to 80¼C -30 to 125¼C M ECHANICAL SPECIFICATIONS Weight: (typical) GENERAL NOTES FastFax Document No. 116 SERIES D2W Rev. 021202 PAGE 1 OF 1 4000 Vrms Insulation Resistance (Min.) @ 500 Vdc Encapsulation: APPROVALS UL E116950 CSA LR81689 0.5 GENERAL SPECIFICATIONS .12 (3.0) .040 (1.0) DIA. (4 PLACES) 1.7 MAX. (43.2) PIN PIN PIN PIN .050 TYP. (1.3) ➀ ➁ ➂ 0.6 oz. (17 g) Thermally Conductive Epoxy © 2002 CRYDOM CORP, Specifications subject to change without notice. All parameters at 25˚C unless otherwise specified. Dielectric and insulation resistance are measured between input and output. Off-State dv/dt test method per EIA/NARM standard RS-443. For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: [email protected] WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [email protected]. GERMANY: +49 (0)180 3000 506