PD - 94281C HFB50HI20C Ultrafast, Soft Recovery Diode FRED Features • • • • VR = 200V Reduced RFI and EMI Reduced Snubbing Extensive Characterization of Recovery Parameters Hermetic IF(AV) = 50A trr = 35ns Description These Ultrafast, soft recovery diodes are optimized to reduce losses and EMI/RFI in high frequency power conditioning systems. An extensive characterization of the recovery behavior for different values of current, temperature and di/dt simplifies the calculations of losses in the operating conditions. The softness of the recovery eliminates the need for a snubber in most applications. These devices are ideally suited for power converters, motors drives and other applications where switching losses are significant portion of the total losses. Absolute Maximum Ratings Parameter VR IF(AV) IFSM PD @ TC = 25°C TJ, TSTG Cathode to Anode Voltage ( Per Leg ) Continuous Forward Current, TC =107 °C Single Pulse Forward Current, TC = 25°C ( Per Leg ) Maximum Power Dissipation Operating Junction and Storage Temperature Range Max. Units 200 50 300 130 -55 to +150 V A W °C Note: D.C. = 50% rect. wave 1/2 sine wave, 60 Hz , P.W. = 8.33 ms CASE STYLE (ISOLATED BASE) ANODE TO-259AA www.irf.com COMMON CATHODE ANODE 1 02/20/06 HFB50HI20C Electrical Characteristics ( Per Leg )@ TJ = 25°C (unless otherwise specified) Parameter VBR Cathode Anode Breakdown Voltage VF Min. Typ. Max. Units V Test Conditions 200 — — IR = 100µA Forward Voltage — — 1.36 See Fig. 1 — — 1.20 — — 1.49 IF = 50A, TJ = 25°C — — 0.99 IF = 25A, TJ = 125°C IF = 25A, TJ = -55°C V IF = 25A, TJ = 25°C See Fig. 2 IR Reverse Leakage Current See Fig. 2 — — — — 10 100 µA µA VR = VR Rated VR = V R Rated, TJ = 125°C CT Junction Capacitance, See Fig. 3 — — 200 pF VR = 200V LS Series Inductance — 8.7 — nH Measured from anode lead to cathode lead , 6mm ( 0.025 in) from package Dynamic Recovery Characteristics ( Per Leg ) @ TJ = 25°C (unless otherwise specified) Parameter trr trr1 trr2 IRRM1 IRRM2 Q rr1 Q rr2 di(rec)M/dt1 di(rec)M/dt2 Min. Typ. Max. Units Reverse Recovery Time Reverse Recovery Time Peak Recovery Current Reverse Recovery Charge Peak Rate of Fall of Recovery Current During tb — — — — — — — — — — 46 84 5.7 12.5 150 595 530 1130 35 — — — — — — — — Test Conditions ns ns IF = 0.5A,VR = 30V, dif/dt = 300A/µs TJ = 25°C See Fig. TJ = 125°C 5 IF = 50A TJ = 25°C See Fig. A A TJ = 125°C 6 VR = 160V TJ = 25°C See Fig. nC nC TJ = 125°C 7 dif/dt = 200A/µs TJ = 25°C See Fig. A/µs 8 A/µs TJ = 125°C Thermal - Mechanical Characteristics Parameter RthJC Wt 2 Junction-to-Case, Single Leg Conducting Weight Typ. Max. Units — 10.9 0.96 — °C/W g www.irf.com HFB50HI20C 100 100 125°C 100°C Reverse Current - I R (µA) 75°C 1 0.1 25°C 0.01 0.001 0.0001 0 40 80 120 160 200 Reverse Voltage - V R (V) 10 Fig. 2 - Typical Reverse Current Vs. Reverse Voltage ( Per Leg ) 1000 Tj = 125°C Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 10 Tj = 25°C Tj = -55°C T J = 25°C 1 0.0 0.4 0.8 1.2 1.6 2.0 100 0 Forward Voltage Drop - V F (V) 40 80 120 160 200 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage ( Per Leg ) Fig. 1 - Maximum Forward Voltage Drop Vs. Instantaneous Forward Current ( Per Leg ) 1 Thermal Response (Z thJC ) D = 0.50 0.20 0.1 0.01 0.001 0.00001 0.10 0.05 0.02 0.01 PDM SINGLE PULSE (THERMAL RESPONSE) t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 10 t1, Rectangular Pulse Duration (sec) Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics ( Per Leg ) www.irf.com 3 HFB50HI20C 120 100 VR = 160V IF = 100A TJ = 125°C TJ = 25°C 100 IF = 50A IRRM - ( A ) trr - ( ns ) IF = 25A 80 IF = 25A 60 IF = 50A IF = 100A 10 VR = 160V 40 TJ = 125°C TJ = 25°C 20 1 100 1000 100 dif / dt - ( A / µs ) 1000 dif / dt - ( A / µs ) Fig. 5 - Typical Reverse Recovery Vs. dif/dt (Per Leg) Fig. 6 - Typical Recovery Current Vs. dif/dt (Per Leg) 10000 100000 IF = 25A IF = 100A di ( rec )M / dt - ( A / µs ) IF = 50A IF = 25A IF = 50A 10000 Qrr - ( nC ) 1000 100 VR = 160V IF = 100A 1000 VR = 160V TJ = 125°C TJ = 25°C TJ = 125°C TJ = 25°C 10 100 100 1000 dif / dt - ( A / µs ) Fig. 7 - Typical Stored Charge Vs. dif/dt (Per Leg) 4 100 1000 dif / dt - ( A / µs ) Fig. 8 - Typical di(rec)M/dt Vs. dif/dt (Per Leg) www.irf.com HFB50HI20C 3 trr IF REVERSE RECOVERY CIRCUIT tb ta 0 Q rr VR = 200V 2 5 0.75 I RRM L = 70µH D.U.T. D G 0.5 I RRM di(rec)M/dt 0.01 Ω dif/dt ADJUST I RRM 4 IRFP250 1 di f /dt 1. dif/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current S Fig. 9 - Reverse Recovery Parameter Test Circuit 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 I RRM extrapolated to zero current 4. Qrr - Area under curve defined by trr and IRRM trr X IRRM Qrr = 2 5. di(rec)M/dt - Peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Case Outline and Dimensions — TO-259AA 3,1$66,*10(176 1 = ANODE 1 2 = COMMON CATHODE 3 = ANODE 2 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 02/2006 www.irf.com 5