FREQUENCY QEA95 / QEA95V SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications Specification (Rev-E) Electrical Characteristics ......................................................P01 Environmental Specifications ................................................P02 Mechanical Characteristics ...................................................P02 Ordering Information .............................................................P03 Test Circuit............................................................................P03 Packaging Drawing ...............................................................P04 Suggested Reflow Soldering.................................................P05 Frequency QEA95 / QEA95V SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications March 16th, 2006 Specification (rev-E) Electrical Characteristics □ Output : Clipped SineWave □ Load : 10KΩ//10pF □ Standard frequency : 10.0 – 12.8 – 13.0 – 14.4 – 14.7456 – 16.384 – 19.2 – 19.44 – 20.0 – 21.4 MHz Electrical Parameters Frequency Range Operating Temperature Range Storage Temperature Range Power supply Unit Minimum MHz 9.6 type QEA95 type QEA95V type QEA95V1 -30 to 75 type QEA95 type QEA95V type QEA95V1 Stability vs Operating Temperature Range Stability vs voltage variation (± 5%) Stability vs load variation (± 10%) Aging (First year at 25°C) Supply Current 9.6MHz ≤ Fo < 16.000MHz 16.0MHz ≤ Fo ≤ 40.000MHz Output voltage 9.6MHz ≤ Fo < 16.000MHz 16.0MHz ≤ Fo ≤ 40.000MHz -40 85 V 3.0 5.0 ± ppm 3.0 3.0 Trimmerless offset 10Hz offset 100Hz offset 1KHz offset 10KHz Test conditions Refer to Ordering Information Refer to Ordering Information Mechanical Trimmer 0.5 0.5 2.0 ± ppm ± ppm At 25°C ± 2°C Refer to Ordering Information 2.5 For frequency less than 28MHz (see Note 1) ± ppm 0.3 ± ppm 0.3 ± ppm 1.0 mA 1.5 2.0 With load 10KΩ//10pF Vp-p 0.8 0.7 Clipped Sine DCcut Pulling Range type QEA95 type QEA95V type QEA95V1 Phase Noise -40 to 85 °C Preset Frequency - Maximum 40 °C Frequency Adjustment - Typical ppm 5 8 10 14 -90 -128 -147 -148 dBc/Hz For frequency less than 28MHz (see Note 2) 5V => Vc=2.50 ± 2.00V 3.3V=> Vc=1.65 ± 1.35V 3.0V=> Vc=1.50 ± 1.00V Typical value for 10MHz TCXO. Note 1 : for frequency ≥ 28MHz, stability vs voltage variation (± 5%) is ± 1.0ppm max Note 2 : for frequency ≥ 28MHz, aging first year ± 2.0ppm max 1 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEA95 / QEA95V SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications March 16th, 2006 Specification (rev-E) Environmental Specifications Item Vibration Test Shock Test Specifications Freq : 10 ~ 55Hz Cycle : 2.00mm, 3 directions each 2 hours Random drop onto concrete 10 times from height of 75 cm Humidity RH : 90% at 40degC during 200 hours Mechanical Characteristics BOTTOM VIEW SUGGESTED PAD Pin connections 4 pins version 6 pins version #1 Vcont or NC #5 Vcont or NC #2 GND #1,2,4 GND #3 Output #3 Output #4 Vcc #6 Vcc H Hmax = 2.00 mm Line 1 Line 2 Line 3 Marking QEA95 QEA95V QEA95V1 E2 AA0* G2 AA0* H2 AA0* Frequency in MHz (6 digits) Date code (YYWW) – Manuf. code * : see letters for Temperature stability, supply voltage and output Example for QEA95 AA0 / 10.000MHz Line 1 : E2 AA0 Line 2 : 10.000 Line 3 : 0610-R 2 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEA95 / QEA95V SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications March 16th, 2006 Specification (rev-E) Ordering Information Part numbering system QEA95 V Package type SMD Package QEA95 : SMD 9.6x11.4 Voltage Control Blank : VC-TCXO trimmerless E O 12.800MHZ Temperature Stability Supply voltage Output Nominal Frequency (MHz) A : ± 2.5ppm vs –30 to +75°C A : + 5.0V ± 1.5ppm vs –20 to +70°C D : +3.3V ± 3.5ppm vs –40 to +85°C E : + 3.0V B: V: C: VC-TCXO with trimmer D : V1 : E: TCXO with trimmer A 0 : Clipped sine wave Please enter the nominal frequency ± 5.0ppm vs –40 to +85°C ± 2.0ppm vs –20 to +70°C Test Circuit 3 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEA95 / QEA95V SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications March 16th, 2006 Specification (rev-E) Tape Drawing Reel Drawing Multiple : 1Kpcs per Reel Unit : mm 4 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEA95 / QEA95V SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications March 16th, 2006 Specification (rev-E) Suggested Reflow Soldering Profile 5 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.