600MHz Low Voltage SPDT Analog Switch in 6-pin SC70 SGM3167 GENERAL DESCRIPTION The SGM3167 is a single, bidirectional, single-pole/doublethrow (SPDT) CMOS analog switches designed to operate from a single +1.8V to +5.5V supply. It features high-bandwidth (600MHz) and low ON-resistance (9Ω typ), Targeted applications for audio switching. SGM3167 features guaranteed on-resistance matching (0.3Ω max) between switches and guaranteed on-resistance flatness over the signal range (2.5Ω TYP). This ensures excellent linearity and low distortion when switching audio signals. SGM3167 is available in a SC70-6 package. FEATURES − Voltage Operation : 1. 8 V to 5. 5 V − On-Resistance: 9Ω (typ) at 5.0V − Fast Switching Time tON 20 ns tOFF 15 ns − High Bandwidth: 600 MHz − High Off-Isolation: 63dB at 10MHz − Rail-to-Rail Operation − TTL/CMOS Compatible − Break-Before-Make Switching − Extended Industrial Temperature Range: –40°C to 85°C − Lead (Pb) Free SC70-6 Package PIN CONFIGURATIONS（TOP VIEW） SGM3167 APPLICATIONS 1 GND 2 NC 3 3167 Portable Instrumentation Battery-Operated Equipment Computer Peripherals Cell Phones PDAs MP3s NO 6 IN 5 V+ 4 COM SC70-6 PIN DESCRIPTION FUNCTION TABLE LOGIC NO NC 0 1 OFF ON ON OFF Switches Shown For Logic “0” Input NAME PIN FUNCTION NO GND NC COM V+ 1 2 3 4 5 Normally-open terminal ground Normally-closed terminal Common terminal Power supply IN 6 Digital control pin to connect the COM terminal to the NO or NC terminals Note: NO, NC and COM terminal may be an input or output. Shengbang Microelectronics Co, Ltd Tel: 86/451/84348461 www.sg-micro.com REV. B ELECTRICAL CHARACTERISTICS (V+ = +2.7V to +3.6V, VIH = +1.4 V, VIL = +0.5V, TA = - 40°C to +85°C, Typical values are at V+ = 3.0V, TA = + 25°C, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS TEMP MIN TPYMAXUNITS ANALOG SWITCH Analog Signal Range VNO, VNC, VCOM On-Resistance On-Resistance Match Between Channels RON V+ = 2.7V, VNO or VNC = 1.5V, ICOM = -10 mA, Test Circuit 1 ∆RON V+ = 2.7V, VNO or VNC = 1.5V, ICOM = -10 mA, Test Circuit 1 - 40°C to +85°C +25°C - 40°C to +85°C +25°C - 40°C to +85°C +25°C V+ 25 28 0.3 0.6 0.8 2.5 8 V Ω Ω Ω Ω Ω - 40°C to +85°C 10 Ω 0 14 RFLAT(ON) V+ = 2.7V, VNO or VNC = 1.0V, 1.5V, 2.0V, ICOM = -10 mA, Test Circuit 1 Source OFF Leakage current INC(OFF), INO(OFF) V+ = 3.6V, VNO or VNC = 0.3V, 3.3V, VCOM = 0.3V, 3.3V, - 40°C to +85°C 1 µA Channel ON Leakage current INC(ON), INO(ON), ICOM(ON) V+ = 3.6V, VCOM = 0.3V, 3.3V, VNO or VNC = 0.3V, 3.3V, or floating - 40°C to +85°C 1 µA 0.5 V V 1 µA On-Resistance Flatness DIGITAL INPUTS Input High Voltage Input Low Voltage Input Leakage Current DYNAMIC CHARACTERISTICS IIN Turn-On Time tON Turn-Off Time tOFF Break-Before-Make Time Delay Skew tSKEW Off Isolation OISO Bandwidth –3 dB BW Source OFF Capacitance Channel ON Capacitance - 40°C to +85°C - 40°C to +85°C VINH VINL tD V+ = +3.6V, VIN = 0 or 5.5V VNO or VNC = 1.5V, RL = 300Ω, CL = 35pF, Test Circuit 2; VIH = 1.5V, VIL = 0V VNO or VNC = 1.5V, RL = 300Ω, CL = 35pF, Test Circuit 2; VIH = 1.5V, VIL = 0V VNO1 or VNC1 = VNO2 or VNC2 = 3V, RL = 300Ω, CL = 35pF, Test Circuit 3 RS = 39Ω, CL = 50pF, Test Circuit 4 f = 10MHz RL = 50Ω, CL = 5pF, VNO or VNC = 1VP-P f = 1MHz Test Circuit 5 Signal = 0dBm, RL = 50Ω, CL = 5pF, Test Circuit 6 f = 1MHz CNC(OFF), CNO(OFF) CNC(ON), CNO(ON), f = 1MHz CCOM(ON) 1 - 40°C to +85°C +25°C 30 ns +25°C 25 ns +25°C 8 ns +25°C +25°C 2 -63 +25°C -83 ns dB dB +25°C 600 MHz +25°C 5.5 pF +25°C 9 pF POWER REQUIREMENTS Power Supply Range V+ Power Supply Current I+ - 40°C to +85°C V+ = +5.5V, VIN = 0V or V+ - 40°C to +85°C 1.8 5.5 V 5 µA Specifications subject to change without notice. 2 SGM3167 ELECTRICAL CHARACTERISTICS (V+ = +4.5V to +5.5V, VIH = +2.0 V, VIL = +0.8V, TA = - 40°C to +85°C, Typical values are at V+ = 5.0V, TA = + 25°C, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS TEMP MIN TPY MAX UNITS ANALOG SWITCH Analog Signal Range VNO, VNC, VCOM On-Resistance On-Resistance Match Between Channels RON V+ = 4.5V, VNO or VNC = 3.5V, ICOM = -10 mA, Test Circuit 1 ∆RON V+ = 4.5V, VNO or VNC = 3.5V, ICOM = -10 mA, Test Circuit 1 - 40°C to +85°C +25°C - 40°C to +85°C +25°C - 40°C to +85°C +25°C V+ 14 16 0.6 0.8 2.6 V Ω Ω Ω Ω Ω - 40°C to +85°C 3 Ω 0 9 0.3 2 RFLAT(ON) V+ = 4.5V, VNO or VNC = 1.0V, 2.0V, 3.5V, ICOM = -10 mA, Test Circuit 1 Source OFF Leakage current INC(OFF), INO(OFF) V+ = 5.5V, VNO or VNC = 1.0V, 4.5V, VCOM = 1.0V, 4.5V, - 40°C to +85°C 1 µA Channel ON Leakage current INC(ON), INO(ON), ICOM(ON) V+ = 5.5V, VCOM = 1.0V, 4.5V, VNO or VNC = 1.0V, 4.5V, or floating - 40°C to +85°C 1 µA 0.6 V V 1 µA On-Resistance Flatness DIGITAL INPUTS Input High Voltage Input Low Voltage Input Leakage Current DYNAMIC CHARACTERISTICS IIN Turn-On Time tON Turn-Off Time tOFF Break-Before-Make Time Delay Skew tSKEW Off Isolation OISO Bandwidth –3 dB BW Source OFF Capacitance Channel ON Capacitance - 40°C to +85°C - 40°C to +85°C VINH VINL tD V+ = +5.5V, VIN = 0 or 5.5V VNO or VNC = 3.0V, RL = 300Ω, CL = 35pF, Test Circuit 2; VIH = 1.5V, VIL = 0V VNO or VNC = 3.0V, RL = 300Ω, CL = 35pF, Test Circuit 2; VIH = 1.5V, VIL = 0V VNO1 or VNC1 = VNO2 or VNC2 = 3V, RL = 300Ω, CL = 35pF, Test Circuit 3 RS = 39Ω, CL = 50pF, Test Circuit 4 f = 10MHz RL = 50Ω, CL = 5pF, VNO or VNC = 1VP-P f = 1MHz Test Circuit 5 Signal = 0dBm, RL = 50Ω, CL = 5pF, Test Circuit 6 f = 1MHz CNC(OFF), CNO(OFF) CNC(ON), CNO(ON), f = 1MHz CCOM(ON) 1.5 - 40°C to +85°C +25°C 20 ns +25°C 15 ns +25°C 5 ns +25°C +25°C 5 -63 +25°C -83 ns dB dB +25°C 600 MHz +25°C 5.5 pF +25°C 9 pF POWER REQUIREMENTS Power Supply Range V+ Power Supply Current I+ - 40°C to +85°C V+ = +5.5V, VIN = 0V or V+ - 40°C to +85°C 1.8 5.5 V 5 µA Specifications subject to change without notice. 3 SGM3167 ORDERING INFORMATION MODEL PINPACKAGE SPECIFIED TEMPERATURE RANGE ORDERING NUMBER PACKAGE MARKING PACKAGE OPTION SGM3167 SC70-6 - 40°C to +85°C SGM3167YC6/TR 3167 Tape and Reel, 3000 ABSOLUTE MAXIMUM RATINGS Junction Temperature...........................................................+150°C Storage Temperature.............................................- 65°C to +150°C Lead Temperature (soldering, 10s).....................................+260°C ESD（HBM）...............................................................................2000V V+ , IN to GND.............................................................- 0.3V to +6V Analog, Digital voltage range(1)................... - 0.3V to (V+ + 0.3V) Continuous Current NO, NC, or COM..........................±120mA Peak Current NO, NC, or COM......................................±250mA Operating Temperature Range..............................- 40°C to +85°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. (1) Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. 4 SGM3167 TYPICAL PERFORMANCE CHARACTERISTICS On Response vs.Frequency On Response vs.Frequency 3 3 V+ = +5V TA = +25℃ V+ = +3V TA = +25℃ 0 On Response(dB) On Response(dB) 0 -3 -6 -9 -3 -6 -9 1 10 100 Frequency(MHz) 1000 1 Response vs.Frequency 20 0 0 ON-LOSS -40 -60 OFF-ISOLATION -80 -100 V+ = +3V TA = +25℃ -120 0.1 ON-LOSS -20 On Response(dB) -20 On Response(dB) 1000 Response vs.Frequency 20 -140 0.01 10 100 Frequency(MHz) 1 10 Frequency(MHz) 100 -40 -60 OFF-ISOLATION -80 -100 V+ = +5V TA = +25℃ -120 -140 0.01 1000 ５ 0.1 1 10 Frequency(MHz) 100 1000 SGM3167 TEST CIRCUITS 10mA V1 COM NO or NC VNO or VNC RON = V1/10mA Test Circuit 1. On Resistance V+ 0.1µF V+ VIN COM NO or NC VNO or VNC 50% VOUT RL 300Ω IN 50% CL 35pF 90% 90% VOUT GND tOFF tON Test Circuit 2. Switching Times V+ 0.1µF NC V+ COM NO VNO or VNC VOUT RL 300Ω IN CL 35pF VIN 0 50% VNO or VNC 90% VOUT GND tD Test Circuit 3. Break-Before-Make Time Delay, tD ６ SGM3167 TEST CIRCUITS (Cont.) SGM3167 IN RS COM NO or NC OUT Rise Time Delay = |tINRISE–tOUTRISE| Fall Time Delay = |tINFALL–tOUTFALL| Rise Time to Fall Time Mismatch = |tOUTFALL–tOUTRISE| CL IN tINRISE tINFALL V+ VIN 50% 90% 90% 10% 10% 0V tINRISE tINFALL VOUT V+ 50% 0V 90% 90% 10% 10% tSKEW Test Circuit 4. Output Signal Skew V+ 0.1µF V+ COM NO or NC Source Signal VOUT CL 5pF IN GND Test Circuit 5. Off Isolation ７ SGM3167 TEST CIRCUITS (Cont.) V+ 0.1µF V+ COM NO or NC Source Signal VOUT CL 5pF IN GND Test Circuit 6. Bandwidth ８ SGM3167 PACKAGE OUTLINE DIMENSIONS SC70-6 D Symbol θ e1 L1 E E1 L e b A1 C 0.20 A 0.900 1.100 0.035 0.043 0.000 0.100 0.000 0.004 A2 0.900 1.000 0.035 0.039 b 0.150 0.350 0.006 0.014 c 0.080 0.150 0.003 0.006 D 2.000 2.200 0.079 0.087 E 1.150 1.350 0.045 0.053 E1 2.150 2.450 0.085 0.096 e1 L A A2 Dimensions In Inches Min Max A1 e ９ Dimensions In Millimeters Min Max 0.650TYP 1.200 1.400 0.525REF 0.026TYP 0.047 0.055 0.021REF L1 0.260 0.460 0.010 0.018 θ 0° 8° 0° 8° SGM3167 REVISION HISTORY Location Page 08/07— Data Sheet REV.A 10/07— Data Sheet changed from REV.A to REV.B Changes to TYPICAL PERFORMANCE CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Shengbang Microelectronics Co, Ltd Unit 3, ChuangYe Plaza No.5, TaiHu Northern Street, YingBin Road Centralized Industrial Park Harbin Development Zone Harbin, HeiLongJiang 150078 P.R. China Tel.: 86-451-84348461 Fax: 86-451-84308461 www.sg-micro.com １０ SGM3167