Part Number: www.SunLED.com ZVG65W 2.1x0.7mm RIGHT ANGLE SMD CHIP LED LAMP Features z2.1mmx0.7mm zLOW RIGHT ANGLE SMT LED, 1.3mm THICKNESS. POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE : 2000PCS / REEL. zMOISTURE zRoHS SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.15(0.006") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) VG (InGaAlP) Unit Operating Characteristics (TA=25°C) VG (InGaAlP) Unit Reverse Voltage VR 5 V Forward Voltage (Typ.) (IF=20mA) VF 2.1 V Forward Current IF 30 mA VF 2.5 V Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width Forward Voltage (Max.) (IF=20mA) iFS 150 mA Reverse Current (Max.) (VR=5V) IR 10 uA Power Dissipation PT 75 mW λP 574 nm Operating Temperature TA -40 ~ +85 Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 570 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF Luminous Intensity (IF=20mA) mcd Wavelength nm λP Viewing Angle 2 θ 1/2 574 120 ° °C Storage Temperature Part Number ZVG65W Tstg Emitting Color Green Published Date : FEB 27, 2008 -40 ~ +85 Emitting Material InGaAlP Lens-color min. typ. 18 59 Water Clear Drawing No : SDSA4482 V3 Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com ZVG65W 2.1x0.7mm RIGHT ANGLE SMD CHIP LED LAMP VG Published Date : FEB 27, 2008 Drawing No : SDSA4482 V3 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com ZVG65W 2.1x0.7mm RIGHT ANGLE SMD CHIP LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 27, 2008 Drawing No : SDSA4482 V3 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com 2.1x0.7mm RIGHT ANGLE SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 27, 2008 ZVG65W Drawing No : SDSA4482 ZVG65W V3 Checked : B.L.LIU P.4/4