Part Number: www.SunLED.com ZFMG10A2 SURFACE MOUNT DISPLAY Features ●0.4INCH DIGIT HEIGHT. ●LOW CURRENT OPERATION. ●EXCELLENT CHARACTER APPEARANCE. ●I.C. COMPATIBLE. ●MECHANICALLY RUGGED. ●GRAY FACE,WHITE SEGMENT. ●PACKAGE:250PCS/REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. ●RoHS COMPLIANT. MG Notes: Operating Characteristics (TA=25°C) 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The gap between the reflector and PCB shall not exceed 0.25mm. Absolute Maximum Ratings (TA=25°C) MG (GaP) Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 140 mA Power Dissipation PT 62.5 TA -40 ~ +85 Tstg -40 ~ +85 Operating Temperature Storage Temperature Part Number ZFMG10A2 Emitting Color Green Published Date : FEB 29, 2008 Emitting Material GaP mW °C typ. 1900 6990 Drawing No : SDSA5363 Unit Forward Voltage (Typ.) (IF=10mA) VF 2.0 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=10mA) λP 565 nm Wavelength of Dominant Emission (Typ.) (IF=10mA) λD 568 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 30 nm Capacitance (VF=0V, f=1MHz) C 15 pF Luminous Intensity (IF=10mA) ucd min. MG (GaP) V4 Wavelength nm λP Description 565 Common Anode, Rt. Hand Decimal Checked : Shin Chi P.1/4 Part Number: www.SunLED.com ZFMG10A2 SURFACE MOUNT DISPLAY MG Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 29, 2008 Drawing No : SDSA5363 V4 Checked : Shin Chi P.2/4 Part Number: www.SunLED.com ZFMG10A2 SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm; Tolerance: ±0.15) Tape Specification (Units : mm) Published Date : FEB 29, 2008 Drawing No : SDSA5363 V4 Checked : Shin Chi P.3/4 Part Number: www.SunLED.com SURFACE MOUNT DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : FEB 29, 2008 ZFMG10A2 ZFMG10A2 Drawing No : SDSA5363 V4 Checked : Shin Chi P.4/4