Part Number: www.SunLED.com ZFUY05C2 SURFACE MOUNT DISPLAY Features ●0.2 INCH DIGIT HEIGHT. ●LOW CURRENT OPERATION. ●EXCELLENT CHARACTER APPEARANCE. ●I.C. COMPATIBLE. ●MECHANICALLY RUGGED. ●GRAY FACE, WHITE SEGMENT. ●PACKAGE : 300PCS / REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. ●RoHS COMPLIANT. UY Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.The gap between the reflector and PCB shall not exceed 0.25mm. 4.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) UY (GaAsP/ GaP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 140 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZFUY05C2 Emitting Color Yellow Published Date : FEB 28,2008 Emitting Material GaAsP/GaP °C Operating Characteristics (TA=25°C) Unit Forward Voltage (Typ.) (IF=10mA) VF 1.95 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=10mA) λP 590 nm Wavelength of Dominant Emission (Typ.) (IF=10mA) λD 588 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 20 pF Luminous Intensity (IF=10mA) ucd min. typ. 480 1890 Drawing No :SDSA5303 UY (GaAsP/ GaP) Wavelength nm λP 590 V4 Description Common Cathode.Rt.Hand Decimal Checked : Shin Chi P.1/4 Part Number: www.SunLED.com ZFUY05C2 SURFACE MOUNT DISPLAY UY Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 28,2008 Drawing No :SDSA5303 V4 Checked : Shin Chi P.2/4 Part Number: www.SunLED.com ZFUY05C2 SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15) Tape Specification (Units : mm) Published Date : FEB 28,2008 Drawing No :SDSA5303 V4 Checked : Shin Chi P.3/4 Part Number: www.SunLED.com SURFACE MOUNT DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : FEB 28,2008 ZFUY05C2 Drawing No :SDSA5303 ZFUY05C2 V4 Checked : Shin Chi P.4/4