Part Number: www.SunLED.com ZFBBA14A2 SURFACE MOUNT DISPLAY PRELIMINARY SPEC Features ● 0.56 INCH DIGIT HEIGHT. ● LOW CURRENT OPERATION. ● EXCELLENT CHARACTER APPEARANCE. ● I.C. COMPATIBLE. ● MECHANICALLY RUGGED. ● GRAY FACE,WHITE SEGMENT. ● PACKAGE : 200PCS / REEL. ● MOISTURE SENSITIVITY LEVEL : LEVEL 4. ● RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Operating Characteristics (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The gap between the reflector and PCB shall not exceed 0.25mm. Absolute Maximum Ratings (TA=25°C) BBA (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 100 mA Power Dissipation PT 120 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Electrostatic Discharge Threshold (HBM) Part Number ZFBBA14A2 Emitting Color Blue Published Date : MAR 01,2008 1000 Emitting Material InGaN °C BBA (InGaN) Unit Forward Voltage (Typ.) (IF=10mA) VF 3.05 V Forward Voltage (Max.) (IF=10mA) VF 4.0 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=10mA) λP 468 nm Wavelength of Dominant Emission (Typ.) (IF=10mA) λD 470 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 21 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 100 pF V Luminous Intensity (IF=10mA) ucd min. typ. 1900 8990 Drawing No : SDSA5399 V4 Wavelength nm λP Description 468 Common Anode, Rt. Hand Decimal Checked : Shin Chi P.1/4 Part Number: www.SunLED.com ZFBBA14A2 SURFACE MOUNT DISPLAY BBA Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 01,2008 Drawing No : SDSA5399 V4 Checked : Shin Chi P.2/4 Part Number: www.SunLED.com ZFBBA14A2 SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15) Tape Specification (Units : mm) Published Date : MAR 01,2008 Drawing No : SDSA5399 V4 Checked : Shin Chi P.3/4 Part Number: www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 01,2008 ZFBBA14A2 SURFACE MOUNT DISPLAY ZFBBA14A2 Drawing No : SDSA5399 V4 Checked : Shin Chi P.4/4