STMICROELECTRONICS ST19WL18

ST19WL18
Smartcard MCU With Modular Arithmetic Processor
& 18 Kbytes High Density EEPROM
DATA BRIEF
PRODUCT FEATURES
ENHANCED 8 BIT CPU WITH EXTENDED
ADDRESSING MODES
■
112 KBYTES USER ROM WITH
PARTITIONING
■
4 KBYTES USER RAM WITH
PARTITIONING
■
18 KBYTES USER EEPROM WITH
PARTITIONING including 128 BYTES USER
and ST OTP AREA:
– Highly reliable CMOS EEPROM
submicron technology
– Error Correction Code for single bit fail
correction within a byte
– 10 year data retention
– 500,000 Erase/Write cycles endurance
– 1 to 64 bytes Erase or Program in 2 ms
■
SECURITY FIREWALLS FOR MEMORIES,
MODULAR ARITHMETIC PROCESSOR and
ENHANCED DES ACCELERATOR.
■
VERY HIGH SECURITY FEATURES
INCLUDING EEPROM FLASH
PROGRAMMING AND CLOCK
MANAGEMENT.
■
3x8 BIT TIMERS WITH INTERRUPT
CAPABILITY
■
HARDWARE SECURITY ENHANCED DES
ACCELERATOR WITH LIBRARY SUPPORT
FOR SYMMETRICAL ALGORITHMS:
– DES, triple DES computations and CBC
chaining mode...
■
1088 Bit MODULAR ARITHMETIC
PROCESSOR WITH LIBRARY SUPPORT
FOR ASYMMETRICAL ALGORITHMS
– Fast modular multiplication and squaring
using Montgomery method
– Software Crypto libraries in separate ST
ROM area for efficient algorithm coding
using a set of advanced functions
– Software selectable operand length up to
2176 bits.
■
ISO 3309 CRC CALCULATION BLOCK
■
■
April 2004
For further information contact your local ST sales office.
■
■
■
■
■
■
■
■
FIPS 140-2 COMPLIANT RANDOM
NUMBER GENERATOR WITH TWO GUN
REGISTERS (Generators of Unpredictable
Number)
2.7 V TO 5.5 V SUPPLY VOLTAGE
EXTERNAL CLOCK FREQUENCY UP TO
8 MHz
HIGH PERFORMANCE PROVIDED USING
INTERNAL CLOCK FREQUENCY
UNIQUE SERIAL NUMBER ON EACH DIE
POWER SAVING STANDBY MODE
CONTACT ASSIGNMENT COMPATIBLE
ISO 7816-2
2SERIAL ACCESS I/O’S, ISO 7816-3
COMPATIBLE
ESD PROTECTION GREATER THAN 5000 V
Figure 1. Delivery Form
259a.ai
Micromodule
Wafer
Function
RSA 1024 bits signature with CRT(2)
RSA 1024 bits signature without CRT(2)
RSA 1024 bits verification (e=’$10001’)
RSA 1024 bits key generation
RSA 2048 bits signature with CRT(2)
RSA 2048 bits verification (e=’$10001’)
Triple DES (with enhanced security)
Single DES (with enhanced security)
1.
2.
Speed(1)
85 ms
282 ms
5.5 ms
2.5 s
570 ms
91 ms
58.0 µs
43.0 µs
Typical values, independent from external clock frequency
and supply voltage.
CRT: Chinese Remainder Theorem.
1/3
3
ST19WL18
HARDWARE DESCRIPTION
The product, member of the ST19W platform, is a
serial access microcontroller specially designed
for cost effective secure portable applications.
It is manufactured using an advanced highly reliable ST CMOS EEPROM technology.
It is based on the STMicroelectronics 8 bit CPU already implemented on the ST19X product family
and includes on-chip memories: User ROM, User
RAM and EEPROM with state of the art security
features. ROM, RAM and EEPROM memories can
be configured into partitions with customized access rules.
An additional ST ROM contains all ST provided
functions and libraries.
Access from any memory area to another are protected by hardware FIREWALLS. Access rules are
User defined and can be selected by mask options
or during the life of the product.
The chip includes an Enhanced DES accelerator
which is accessible via cryptographic software libraries located in ST ROM.
The chip includes also a MAP which is based on a
1088 bits processor architecture. It processes
modular multiplication, squaring and additional
calculations up to 2176 bit operands.
Internal Modular Arithmetic Processor (MAP) and
DES accelerator are designed to speed up cryptographic calculations using Public Key Algorithms
and Secret Key Algorithms.
As with all the other ST19W products, serial interfaces fully compatible with the ISO7816 standard
for Smartcard applications are available.
A CRC calculation block is also available and is directly accessible by the User.
Figure 2. Block Diagram
RAM
EEPROM
USER ROM
ST ROM
and CRYPTO
LIBRARY
MEMORY ACCESS FIREWALL
EDES
ACCELERATOR
MAP
ST ROM, MAP and DES FIREWALL
INTERNAL BUS
CRC
MODULE
CLOCK
GENERATOR
MODULE
CLK
3X
8 BIT
TIMERS
SECURITY
ADMIN.
GUN A
&
GUN B
8 BIT
CPU
RESET
Vcc
GND
2 SERIAL
I/O
INTERFACES
I/O0
I/O1
449
SOFTWARE DEVELOPMENT
Software development and firmware generation
(ROM and options) are supported by a comprehensive set of development tools, dedicated at development and validation of softwares:
2/3
–
–
–
–
ST19-HDSX Emulator,
ST19X simulation package,
ST19 tools pack environment for WindowsTM
NT, 2000, XP based stations,
Powerful C/C++ compiler and debugger are
also available (third party tools).
ST19WL18
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics.
All other names are the property of their respective owners.
© 2004 STMicroelectronics - All rights reserved
BULL CP8 Patents
STMicroelectronics GROUP OF COMPANIES
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States
www.st.com
3/3