ASMT-FJ10-ADH00 Surface Mount AF Lamp Data Sheet Descriptions Features Avago Technologies’ ASMT-FJ10-ADH00 is a SMT (Surface Mount Technology) dome lamp uses an untinted, nondiffused lens to provide a high luminous intensity within a narrow radiation pattern. The device is made by encapsulating LED chip on axial lead frame to form molded epoxy lamp package with 6 bended leads for surfacing mounting. • Smooth, Consistent Narrow Radiation Pattern This lamp type LED utilize Aluminum Indium Gallium Phosphide (AlInGaP) material technology. The AlInGaP material has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. The color available for this SMT Lamp package is 605nm Orange. This narrow angle SMT lamp package is designed for applications that require long distance illumination and narrow beam pattern such as auxiliary flash for auto-focus function in digital still camera etc. In order to facilitate pick and place operation, this SMT Lamp is shipped in tape and reel, with 1000 units per reel. This package is compatible with Pb-free IR soldering process. • 8° View Angle • 4.8 L x 4.8 X 5.33H mm Package Dimension • Good Intensity Output • Compatible with IR Solder Reflow • Available in 16mm tape on 15" (380mm) Diameter reels • Clear, Non-diffused Epoxy • IEC/EN 60825-1 Eye Safety Class 1 • RoHS Compliant Applications • Camera Eye Safety These orange Surface Mount AF Lamp are use for camera application. The LEDs have lenses, which focus the beam at about 10mm from the front of the lens, from where the beam diverges relatively slowly. If the LEDs were placed in a product, they would create a Class 1 LED to IEC/EN 60825-1 (2001) under all conditions of operation & single fault failure. As long as no collimating optics are added to the optical path. CAUTION: ASMT-FJ10 LEDs are Class 1 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details. Package Dimensions 5.20 ± 0.10 4.80 ± 0.10 4.80 0.51 1.27 Pin: 1,2,4 - Anode Pin: 3,5,6 - Cathode 3.92 5.33 ± 0.10 ∅4.32 ± 0.1 0.15 Notes: 1. All Dimensions in millimeters. 2. Tolerance is ±0.1mm unless otherwise specified. Device Selection Guide Color Part Number min. lv (cd) Typ. lv (cd) Test Current (mA) Dice Technology Orange ASMT-FJ10-ADH00 9 22 20 AllnGaP Notes: 1. The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. Iv Tolerance = ±15% Absolute Maximum Ratings at TA = 25°C Parameter ASMT-FJ10-ADH00 Units DC Forward Current 50 mA Power Dissipation 130 mW LED Junction Temperature 110 °C Operating Temperature Range -40 to +85 °C Storage Temperature Range -40 to +100 °C Soldering Temperature Figure 6 Optical Characteristics (TA = 25 °C) Peak Wavelength lPEAK (nm) Dominant Wavelength lD [1] (nm) Viewing Angle 2q½ [2] (Degrees) Luminous Efficacy, hv[3] (lm/W) Luminous Efficiency (lm/W) Part Number Color Typ. Typ. Typ. Typ. Typ. ASMT-FJ10-ADH00 Orange 612 605 8 355 27 Notes: 1. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. θ½ is the off-axis angle where the luminous intensity is ½ the peak intensity. 3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. Electrical Characteristic (TA = 25°C) Forward VoltageVF (Volts) @ IF = 20mA Reverse Voltage VR @ 10mA Capacitance C (pF), VF= 0 f = 1MHz Part Number Min. Typ. Max. Min. Typ. ASMT-FJ10-ADH00 1.8 2.0 2.4 5 22 1.0 50 0.9 45 0.8 40 0.7 35 Forward Current-mA Relative Intensity Notes: Vf tolerance is ±0.1V. 0.6 0.5 0.4 0.3 0.2 30 25 20 15 10 5 0.1 0 0 380 430 480 530 580 630 680 730 780 0 0.5 1 Wavelength-nm 2.5 3 Figure 2. Forward Current vs Forward Voltage 3.0 1.0 0.9 2.5 0.8 2.0 Relative Intensity Relative Luminous Intensity (Normalized at 20mA) 2 Forward Voltage-V Figure 1. Relative Intensity vs. Wavelength 1.5 1.0 0.7 0.6 0.5 0.4 0.3 0.2 0.5 0.1 0 0 10 20 30 DC Forward Current-mA Figure 3. Relative Intensity vs. Forward Current 1.5 40 50 0 -90 -70 -50 Figure 4. Radiation Pattern -30 -10 10 30 Off-Axis Angle (˚) 50 70 90 50 40 255 ˚C 217 ˚C Temperature Maximum DC Forward Current mA 60 30 20 10 +5˚C -0˚C 10 to 20 SEC. 6 ˚C/SEC. MAX. 3˚C/SEC. MAX. 125˚C ± 25˚C 60 to 150 SEC. MAX. 120 SEC. 0 0 20 40 60 80 100 Time Ambient Temperature - ˚C Figure 5. Maximum forward current vs ambient temperature. Figure 6. Recommended reflow soldering USER FEED DIRECTION 1.2 0.6 0.67 CATHODE SIDE 2.88 Figure 7. Recommended soldering land pattern PRINTED LABEL Figure 8. Reeling Orientations Figure 9. Reel Dimensions 12.00 ± 0.10 2.00 ± 0.10 ∅ 1.50 ± 0.10 4.00 ± 0.10 1.75 ± 0.10 7.50 ± 0.10 16.0 + 0.30 -0.10 ∅ 1.50 ± 0.25 0.400 ± 0.02 10˚ MAX. 6˚ MAX. 4.95 ± 0.10 5˚ MAX. 5.34 ± 0.10 5.40 ± 0.10 Figure 10. Tape Dimensions END THERE SHALL BE A MINIMUM OF 600 mm (23.6 ") OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. START MOUNTED WITH COMPONENTS THERE SHALL BE A MINIMUM OF 160 mm (6.3 ") OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MINIMUM OF 230 mm(9.05 ") MAY CONSIST OF CARRIER AND/OR COVER TAPE. Figure 11. Tape Leader and Trailer Dimensions There shall be a minimum of 600mm (23.6”) of empty component pockets sealed with cover tape Notes: 1. All dimensions in millimeters. 2. Tolerance is ± 0.1 mm unless otherwise specified. Iv Bin Category (cd) Color Bin Category Bin ID Min Max Orange Min (nm) Max (nm) D 9.0 11.5 A 600 604 E 11.5 15.0 B 604 608 F 15.0 19.5 C 608 612 G 19.5 25.5 H 25.5 33.0 Tolerance = ±1nm Iv Tolerance = ±15% For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0482EN AV02-0133EN -February 8, 2007