TOTAL-POWER TPVI10-20

TOTAL POWER INT'L
UNIVERSAL INPUT AC-DC PCB OPEN FRAME SINGLE &
DUAL OUTPUT 10 WATTS INTERNAL SWITCHING
POWER SUPPLIES TPVI10 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES
COMPACT PCB OPEN FRAME FORMAT
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET CISPR PUB. 22 & FCC CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage: Range Typ. 90-264Vac.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Wattage: Typ. 10 watts.
Output Connector: Molex # 5273.
Line Regulation: Typ. 0.1%.
Load Regulation: Main VO1 typ. ±1-1.5%.
Aux. VO2 typ. ±1-2%. (P.R.)
Noise & Ripple: Typ. 1.0% peak to peak.
OVP: Built-in at main output VO1.
Adjustability: Available at main output VO1.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
OLP set at about 125-150% rating output wattage.
Consult the factory for OLP setting.
Rating 100 to 240Vac.
Input Connector: Molex # 5273.
Input Frequency: 47-63Hz.
Inrush Current: Typ. 20A @230Vac.
Input Current: Typ. 0.3A @115Vac, 0.15A @ 230Vac.
Dielectric Withstand: Meet IEC 60950-1.
EMI: Meet CISPR PUB.22 & FCC Class B.
Hold-up Time: Typ. 20mS @115Vac, 80mS @230Vac.
Earth leakage: Typ. 0.3mA @230Vac.
GENERAL SPECIFICATION
Efficiency: Typ. 65%.
Switching Frequency: Typ. 55K Hz at 115Vac.
Circuit Topology: Free-running flyback circuit.
Transient Response: Output voltage returns in
less than 3mS following a 25% load change.
Safety Standard: IEC 60950-1/UL 60950-1 Class I.
Operating Temperature: 0 to +50°C.
Storage Temperature: -20 to +85°C.
Temperature Coefficient: Typ. 0.04%/°C.
Cooling: Free air convection.
Construction: PCB open frame format.
Power Density: 0.89Watts / Cubic Inch.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
OUTPUT VOLTAGE / CURRENT RATINGS CHART
SINGLE OUTPUT
MODEL NO.
TPVI10-10
TPVI10-11
TPVI10-12
TPVI10-13
MAIN VO1 @
Typ.
Volt.
2.0A
5.0V
1.0A
12.0V
0.7A
15.0V
0.5A
24.0V
Max.
3.00A
1.50A
1.20A
0.75A
DUAL OUTPUT
MODEL NO.
TPVI10-20
TPVI10-21
TPVI10-22
TPVI10-23
MAIN VO1 @ ◇
Typ.
Max.
Volt.
2.5A
1.7A
5.0V
1.0A
2.0A
5.0V
1.0A
2.0A
5.0V
1.0A
2.0A
5.0V
AUX. VO2 ●◇
Typ.
Max.
Volt.
0.5A
0.3A
5.0V
0.5A
0.5A
12.0V
0.4A
0.5A
15.0V
0.2A
0.3A
24.0V
Symbol: " " OVP built-in. "@" Adjustable. "◇" Floating (or isolated) output.
" " Installed with Post Regulator. (P.R.)
Remark: (1) At least 20% of typical main output current is required to maintain stated regulation.
(2) Peak output, less than 60 Sec. with 10% duty cycles.
(3) Max. current can't be drawn from all output at the same time.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 158.0 g (5.57 Oz.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
AC INPUT
ASSIGNMENT
AC-LINE
AC-NEUTRAL AC-GROUND
CONNECTOR
P1-L
P1-N
P1-G
&PIN #
Mating connector: Molex 5195 or 5239 series.
-VO1
P2-1,2
SINGLE/DUAL OUTPUT
+VO1
-VO2
P2-3,4
P2-5
+VO2
P2-6