Model VCP3028X Frequency Translator Features: • • • • • • 155.52 MHz SAW-based LVPECL output RoHS Compliant Low Profile Surface Mount Package Excellent solder reflow performance PCB Substrate for excellent TCE match Non-peaking attenuation Response VCP3028X 155 M CTS 07XX Description and applications: Surface mount 15.9 mm SQ frequency translator operating at a 3.3V supply with complementary LVPECL outputs for use in telecom & datacom • See WWW.CTSCORP.COM for product patent status. Electrical Specifications: VCP3028X Specification Input frequency 77.76 MHz Output frequency 155.52 MHz Supply Voltage (± ± 5%) 3.3V PECL input 400 mV min. peak-to-peak PECL output Logic “0” Logic “1” Output Duty Cycle 45/55% max Current Drain 95 mA max. Operating Temperature -40 to 85°C Input frequency tracking capability +/- 32 ppm minimum Jitter attenuation > > Peaking <0.1 dB RMS phase jitter generation (12 kHz to 50 MHz) <1 psec max. Min. 1.49V 2.28V Max. 1.68V 2.42V 3 dB @ 400 Hz offset 6 dB @ 1 kHz offset VCP3028X REV. A 03/26/07 CTS Electronic Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 http://www.ctscorp.com/ VCP3028X Mechanical Dimensions (mm): 15.9mm x 15.9mm x 3.1 mm (max.): 3.1 MAX [.122] 15.9±0.1 [.625±.004] 6.98 [.275] 0.76 [.030] Pin #1 mark PIN 14 2.62 TYP [.103] PIN 13 PIN 1 1.14 TYP [.045] PIN 12 PIN 2 VCP3028X 155.52 M CTS 07XX 15.9±0.1 PIN 3 [.625±.004] PIN 4 PIN 5 PIN 11 PIN 10 CL 2.54 TYP [.100] 1.02 TYP [.040] PIN 9 PIN 8 PIN 6 PIN 7 0.25 [.010] CL Ø0.51[.020] 10 places HATCHING INDICATES BARRIER COATING OVER RESIST MASK OVER GROUND PLANE 1.7 [.067] TYP Recommended Land Pattern 17.60 [.693] THIRD ANGLE PROJECTION 12.75 [.502] 1.19 TYP [.047] All dimensions are in MM [Inches]. All dimensions are nominal unless otherwise specified. Lead Termination Finish: Gold Flash, <10 micro inch, over Ni plated Cu. 17.60 [.693] 13.18 [.519] CL 2.54 TYP [.100] Package outline CL 2.79 TYP [.110] 3.49 [.137] 6.98 [.275] VCP3028X REV. A 03/26/07 CTS Electronic Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 http://www.ctscorp.com/ VCP3028X _________________________________________________________________ PIN OUT Pin Symbol Function 1 LD Lock detect Logic “1” indicates a locked condition (CMOS level >Vdd-.04) Logic “0” indicates that no input signal is present or the input signal has moved out of the lock range (CMOS Level <0.4V) 2 IN Input frequency 3 /IN NC: not connected internally 4 GND Ground 5 E/D Enable/ disable Logic “0” = output disabled (CMOS Level <0.4V) Logic “1” = output enabled (CMOS Level > Vdd-0.4 V) 6 Gnd Ground 7 Gnd Ground 8 /OUT Complementary output 9 OUT Output 10 Vcc Power supply voltage 11 N/C No connection 12 Gnd Ground 13 Gnd Ground 14 Gnd Ground VCP3028X REV. A 03/26/07 CTS Electronic Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 http://www.ctscorp.com/ VCP3028X _________________________________________________________________ Tape & Reel Information Tape width 24 mm, pitch 20 mm, as per EIA 481-2, 1000 units per reel max Environmental Limits: Storage Temperature Humidity Vibration Mechanical Shock -40 to +90 °C. 95% Relative humidity max @ 70°°C. 10 to 60 Hz with double amplitude of 1.52mm max. (1/2 hour in each of 3 perpendicular planes). 1/2 sine pulse, 3000G, with pulse width 0.3mSec. (3 shock in each of 6 directions of 3 perpendicular planes). VCP3028X REV. A 03/26/07 CTS Electronic Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 http://www.ctscorp.com/ VCP3028X _________________________________________________________________ Solder Reflow Conditions Device is capable of withstanding reflow of 260 degrees C for 10 seconds maximum. Moisture Sensitivity: MSL 1 RoHS: This device is fully compliant to RoHS Directive 2002/95/EC. VCP3028X REV. A 03/26/07 CTS Electronic Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 http://www.ctscorp.com/