TGJ Series • General Purpose Coupling Transformers Features • EMI noise suppression in the common mode • small size SMD package for high density board placement • SMD package is pick and place compatible and provides consistent and reliable coplanarity • low leakage inductance • Manufactured in an ISO-9001:2000, TS-16949:2002 and SO-14001:2004 certified Talema facility • Fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications Ratings@ 25°C ambient Power Rating with 40°C temperature rise : 500mW Dielectric Strength between windings: 500Vrms Operating Temperature Range: -40°C to +85°C Storage Temperature: -40°C to +125°C Insulation Resistance: 10,000 MOhm minimum Test Frequency: Inductance measured @ 100kHz/20mVrms Typical Applications include: General Isolation, Telecommunications, LAN Coupling and Isolation, Modems, Voltage Step-Up or Step-Down, Impedance Matching and Baluns Standard packing: Tape and reel TGJ Series • SMD Common Mode EMI Noise Suppression Chokes Part Number OCL (µH ±30% ) Turns Ratio ±2% LL Pri/Sec (µH Max) CC Pri/Sec (pF Max) Rise Time (nS Max) Primary ET (V-µS Min) RCUP (mOhms) RCUS (mOhms) RCUT (mOhms) Schematic TGJ-50-6C TGJ-200-6C TGJ-500-6C TGJ-2000-6C TGJ-5000-6C TGJ-200-6G TGJ-500-6G TGJ-2000-6G TGJ-5000-6G TGJ-200-6D TGJ-500-6D TGJ-2000-6D TGJ-200-GH TGJ-500-6H TGJ-2000-6H 50 200 500 2000 5000 200 500 2000 5000 200 500 2000 200 500 2000 1:1:1 1:1:1 1:1:1 1:1:1 1:1:1 2:1:1 2:1:1 2:1:1 2:1:1 1ct:1ct 1ct:1ct 1ct:1ct 2ct:1ct 2ct:1ct 2ct:1ct 0.5 0.3 0.4 0.8 1.3 0.8 1.1 1.8 3.6 0.3 0.4 0.8 0.8 1.2 1.8 18 18 32 37 60 8 11 19 33 18 32 37 8 12 19 5.6 4.2 5.3 8.2 10.5 3.2 5.6 11 16 4.2 5.3 8.2 3.2 5.6 11 5.2 5.9 8.5 16 25 5.0 8.5 16 25 5.0 8.5 16 5.0 8.5 16 110 210 330 690 1370 210 330 690 1100 210 300 690 300 330 690 110 210 330 690 1370 105 165 345 550 210 330 690 150 165 345 120 240 390 810 130 105 165 345 550 ------- C C C C C G G G G D D D H H H TGJ 0.307 (7.80) 0.200 (5.08) 0.100 (2.54) 0.492 0.287 (12.50) (7.30) D&H C&G 1 0° - 8° 0.453 0.374 (11.50) (9.50) Schematic Suggested Pad Layout TALEMA IN WK/YR Part Number 0.047 (1.20) 6 2 1 6 5 3 2 5 4 3 4 0.283 0.244 (7.20) (6.20) 0.020 x 0.12 (0.50 x 0.30) Dimensions: Inches (Millimeters) To l e r a n c e : ± 0 . 0 1 0 ( 0 . 2 5 ) u n l e s s s p e c i f i e d o t h e r w i s e S u r f a c e c o p l a n a r i t y w i l l b e 0 . 0 0 4 ( 0 . 0 1 ) maximum Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 37 - 744 9303 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com (10-06) Communications \ Networks\TGJ