DSEE 6-06CC ADVANCE TECHNICAL INFORMATION HiPerDynFREDTM Epitaxial Diode Electrically Isolated Back Surface IFAV = 6 A VRRM = 600 V trr = 20 ns VRRMc ISOPLUS 220 E153432 ISOPLUS220TM VRRM V V 600 300 Type DSEE 6-06CC Symbol Conditions IFRMS IFAVM TC = 150°C; rectangular, d = 0.5 1 2 3 Maximum Ratings 20 6 A A EAS TVJ = 25°C; non-repetitive IAS = 0.8 A; L = 180 µH 0.1 mJ IAR VA = 1.5·VR typ.; f = 10 kHz; repetitive 0.1 A -40...+175 175 -40...+150 °C °C °C 50 W 2500 V~ TVJ TVJM Tstg Ptot TC = 25°C VISOL 50/60 Hz RMS; IISOL ≤ 1 mA FC Mounting force Weight typical Isolated back surface* Features λ λ λ λ λ λ λ λ 11...65 / 2.4...11 N / lb 2 g Applications λ Symbol IR c VF e Conditions Characteristic Values typ. max. TVJ = 25°C VR = VRRM TVJ = 150°C VR = VRRM IF = 10 A; 25 0.2 µA mA 1.35 1.8 V V 3.0 0.6 K/W K/W TVJ = 125°C TVJ = 25°C RthJC RthCH trr IF = 1 A; -di/dt = 50 A/µs; VR = 30 V; TVJ = 25°C 20 ns IRM VR = 100 V; IF = 10 A; -diF/dt = 100 A/µs TVJ = 100°C 2 A Silicon chip on Direct-Copper-Bond substrate - High power dissipation - Isolated mounting surface - 2500V electrical isolation Low cathode to tab capacitance (<15pF) Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour Epoxy meets UL 94V-0 λ λ λ λ λ λ λ Antiparallel diode for high frequency switching devices Antisaturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages λ λ λ Avalanche voltage rated for reliable operation Soft reverse recovery for low EMI/RFI Low IRM reduces: - Power dissipation within the diode - Turn-on loss in the commutating switch Notes: Data given for TVJ = 25OC and per diode unless otherwise specified c Diodes connected in series d Pulse test: pulse Width = 5 ms, Duty Cycle < 2.0 % e Pulse test: pulse Width = 300 µs, Duty Cycle < 2.0 % IXYS reserves the right to change limits, test conditions and dimensions. DS98915B(07/03) © 2003 IXYS All rights reserved DSEE 6-06CC ISOPLUS220 Outline NOTE: 1. Bottom heatsink (Pin 4) is electrically isolated from Pin 1, 2 or 3. 2. Pin connections: 1 - Cathode 2 - Anode/Cathode 3 - Anode