SOGC 01, 03, 05 Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Small Outline Molded Dip, 01, 03, 05 Schematics, 16 or 20 Pins FEATURES • 0.110" [2.79mm] maximum seated height • Rugged, molded case construction • 0.050" [1.27mm] lead spacing • Reduces total assembly costs • Compatible with automatic surface mounting equipment • Uniform performance characteristics • Meets EIA PDP 100, SOGN-0003 outline dimensions • Available in tube pack or tape and reel pack STANDARD ELECTRICAL SPECIFICATIONS MODEL SCHEMATIC RESISTOR PACKAGE CIRCUIT POWER W @ 70°C W @ 70°C SOGC-16 01 0.1 1.6 03 0.19 1.6 05 0.1 1.6 SOGC-20 01 0.1 2.0 03 0.19 2.0 05 0.1 2.0 * Tolerances in brackets available upon request. • 100 milliohm maximum on zero ohm jumper TOLERANCE ±% 2 (1, 5*) 2 (1, 5*) 2 (5*) 2 (1, 5*) 2 (1, 5*) 2 (5*) TECHNICAL SPECIFICATIONS PARAMETER Package Power Rating (max. at + 70°C) RESISTANCE RANGE Ω 10-1M0 10-1M0 10-1M0 10-1M0 10-1M0 10-1M0 TEMPERATURE COEFFICIENT ppm/°C 100 100 100 100 100 100 MECHANICAL SPECIFICATIONS UNIT S0GC-16 / -20 Marking: W 1.6 / 2.0 TC Tracking (- 55°C to + 125°C) ppm/°C ± 50 Voltage Coefficient of Resistance: ppm/V < 50 typical. VDC 50 Operating Temperature Range: °C - 55 to + 125. Marking Resistance to Solvents: Maximum Solder Reflow Temperature: Solderability: Terminals: Storage Temperature Range: °C - 55 to + 150 Body: Maximum Operating Voltage: OPERATING VOLTAGE VDC 50 max 50 max 50 max 50 max 50 max 50 max Model number, schematic number, value tolerance, pin 1 indicator, date code. Permanency testing per MIL-STD-202, Method 215. + 255ºC Per MIL-STD-202, Method 208E. Copper alloy. 60/40 solder dipped terminal. Molded epoxy. ORDERING INFORMATION 01, 03 Schematic SOGC MODEL 16 20 NUMBER OF LEADS 01 03 SCHEMATIC First 2 digits (3 for F tolerance) are significant figures. Last digit specifies number of zeros to follow. 05 Schematic SOGC MODEL 16 20 NUMBER OF LEADS xxx or xxxx R1 VALUE 05 SCHEMATIC xxx or xxxx R1 VALUE xxx or xxxx R2 VALUE First 2 digits (3 for F tolerance) are significant figures. Last digit specifies number of zeros to follow. www.vishay.com 118 For Technical Questions, contact: [email protected] G TOLERANCE F = ± 1% G= ± 2% J = ± 5% G TOLERANCE F = ± 1% G= ± 2% J = ± 5% Document Number: 31506 Revision 01-Aug-02 SOGC 01, 03, 05 Thick Film Resistor Networks, Small Outlline, Molded, DIP Vishay Dale DIMENSIONS in inches [millimeters] B 0.050 [1.27] Non-Accum. Typ. 0.006 [0.152] Max. Typ. 0.105 [2.67] 0.018 [0.457] Typ. 0.010 ± .005 [0.254 ± 0.127] 0.100 [2.54] SOGC 0.406 ± 0.012 [10.31 ± 0.305] 0.295 [7.49] MODEL Pin 1 0.045 [1.14] 0.045 [1.14] Ref. A 0.028 ± 0.010 [0.711 ± 0.254] Typ. 0.008 [0.203] B A SOGC-16 0.440 [11.18] 0.350 [8.89] SOGC-20 0.540 [13.72] 0.450 [11.43] CIRCUIT APPLICATIONS 15 or 19 resistors with one pin common 01 Schematic The SOGC-xx01 circuit provides a choice of 15 or 19 nominally equal resistors, each connected between a common lead (16 or 20) and a discrete PC board pin. Commonly used in the following applications: • MOS/ROM Pull-up/Pull-down • TTL Input Pull-down • Open Collector Pull-up • Digital Pulse Squaring • "Wired OR" Pull-up • TTL Unused Gate Pull-up • Power Driven Pull-up • High Speed Parallels Pull-up SOGC-16 Pin 1 SOGC-20 03 Schematic 8 or 10 isolated resistors The SOGC-xx03 circuit provides a choice of 8 or 10 nominally equal resistors with each resistor isolated from all others and wired directly across. Commonly used in the following applications: • "Wired OR" Pull-up • Long-line Impedance Balancing • Power Driven Pull-up • LED Current Limiting • Powergate Pull-up • ECL Output Pull-down • Line Termination • TTL Input Pull-down SOGC-16 Pin 1 SOGC-20 05 Schematic R1 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R1 R1 R2 R2 R1 R2 R1 R2 R1 R2 R1 R2 TTL dual-line terminator; pulse squaring, 14 or 18 pairs of resistors (R1 Resistors are common to leads 16 or 20) (R2 Resistors are common to leads 8 or 10) R2 The SOGC-xx05 circuit contains 14 or 18 pairs of resistors. Each pair is connected between ground and a common line. The junctions of these resistor pairs are connected to the input leads. The 05 circuits are designed for TTL dual-line termination and pulse squaring. R1 R2 R2 SOGC-16, SOGC-20 Power Rating (Watts) Pin 1 SOGC-2001, 03, 05 Pkg. PERFORMANCE 2.0 TEST SOGC-1601, 03, 05 Pkg. 1.6 Power Conditioning 1.0 Single Resistor 0.19 0.10 - 50 SOGC-xx03 SOGC-xx01 & 05 0 Derating Document Number: 31506 Revision 01-Aug-02 Thermal Shock ± 0.50% ∆R Short Time Overload ± 0.25% ∆R Low Temperature Operation ± 0.25% ∆R Moisture Resistance ± 0.50% ∆R Resistance to Soldering Heat ± 0.25% ∆R Shock ± 0.25% ∆R Vibration ± 0.25% ∆R Load Life ± 0.50% ∆R Terminal Strength ± 0.25% ∆R Insulation Resistance + 25 + 70 + 125 + 150 MAX. ∆R (Typical Test Lots) ± 0.50% ∆R Dielectric Withstanding Voltage Ambient Temperature °C For Technical Questions, contact: [email protected] 10,000 Megohm (minimum) No evidence of arcing or damage (200 V RMS for 1 minute) www.vishay.com 119