DATA SHEET SKY13292-365LF: 4 x 2 Switch Matrix with Tone/Voltage Decoder 250 MHz–2.15 GHz Functional Block Diagram Applications ● DBS switching applications, cable modems, cable TV Features ● ● ● ● ● ● ● VDD P0 B1 B2 T1 Broadband: 250 MHz–2.15 GHz Tone and voltage or mode control switching High isolation: 40 dB typ. @ 900 MHz Four RF inputs, two RF outputs Low current consumption: 8.5 mA typ. @ 5 V Miniature QFN-20 4 x 4 mm package Lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020 T2 Control Circuit V1 V2 OUT 1 OUT 2 I1 I3 I2 I4 Description The SKY13292-365LF is a four-input to two-output switch in a low-cost QFN-20 4 x 4 mm package. The SKY13292-365LF enables 16 states, directing any of the four inputs to either of the two outputs. Switch states can be selected via tone and voltage signals in conjunction with logic levels applied to mode control inputs. The switch can operate over the temperature range of -40 °C to +85 °C. The SKY13292-365LF is available in the lead (Pb)-free, RoHScompliant, QFN-20 4 x 4 mm plastic package. NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200348 Rev. E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 15, 2007 1 DATA SHEET • SKY13292-365LF Operating Characteristics at 25°C (0, 3 V) Parameter Sym. Condition Frequency Min. Typ. Max. Unit RF Switch Performance Insertion loss 0.25 - 0.95 GHz 0.95 - 2.15 GHz 7.5 9.0 8 10 dB dB Insertion loss flatness 0.25 - 0.95 GHz 0.95 - 2.15 GHz 0.7 2.0 1 3 dB dB Isolation Return loss Input power for 1 dB compression Normalized to insertion loss 0.25 - 0.95 GHz 0.95 - 2.15 GHz 38 28 40 30 dB dB I1, I2, I3, I4 OUT1, OUT2 0.25 - 2.15 GHz 10 8 15 10 dB dB 15 dBm IP1 dB 0.25 - 2.15 GHz Tone/Voltage Detector Performance Polarization select input current Polarization select threshold voltage Polarization switching time IP1, IP2 VP1 = 21 V, VP2 = 21 V 200 VTP1, VTP2 14 TSPOL µA 14.5 15 0.9 Tone frequency TF1, TF2 Tone threshold voltage TT1, TT2 Without external capacitor 22 kHz Tone input impedance TZIN1, TZIN2 Including external 10 nF series capacitor 22 kHz Control input current IDIG 0 V < VCTRL < VDD Control input low logic level VLOW 0 Control input high logic level VHIGH VDD - 1 Supply voltage VDD 3 Supply current IDD V µs 7 22 650 kHz 45 170 900 Vpk–pk 2 kΩ Mode Control Performance 1 µA 1 V VDD VDD + 0.5 V 5 5.5 Power Supply 8.5 V mA Typical Operating Conditions Sym. Condition Tone frequency Parameter TF1, TF2 VTF = 100 mVpk-pk, 10 nF external DC block Tone threshold voltage(1) TT1, TT2 Frequency 22 kHz Min. Typ. Max. Unit 18 22 26 kHz 100 170 350 mVpk-pk This switch will detect 22 kHz signaling amplitudes across the full specified range of the DiSEqC bus functional specification Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 May 15, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200348 Rev. E DATA SHEET • SKY13292-365LF Typical Performance Data Z0 = 50 Ω, TA = 25 ºC, unless otherwise noted 0 Insertion Loss and Isolation (dB) Insertion Loss and Isolation (dB) 0 -10 -20 -30 -40 -50 -60 -70 -80 440 880 1320 1760 2200 -30 -40 -50 -60 -70 0 440 880 1320 1760 2200 Frequency (GHz) Frequency (GHz) I1_OUT1 and I1_OUT2 Paths: States 0 to 15 I2_OUT1 and I2_OUT2 Paths: States 0 to 15 0 Insertion Loss and Isolation (dB) 0 Insertion Loss and Isolation (dB) -20 -80 0 -10 -20 -30 -40 -50 -60 -70 -80 -10 -20 -30 -40 -50 -60 -70 -80 0 440 880 1320 1760 2200 0 440 880 1320 1760 2200 Frequency (GHz) Frequency (GHz) I3_OUT1 and I3_OUT2 Paths: States 0 to 15 I4_OUT1 and I4_OUT2 Paths: States 0 to 15 0 0 -10 Output Return Loss (dB) Input Return Loss (dB) -10 -20 -30 -40 -5 -10 -15 -20 -25 -30 -50 0 440 880 1320 1760 2200 0 440 880 1320 1760 Frequency (GHz) Frequency (GHz) I1 I2 I3 I4: States 0 to 15 OUT1 and I2_OUT2: States 0 to 15 2200 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200348 Rev. E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 15, 2007 3 DATA SHEET • SKY13292-365LF Absolute Maximum Ratings Characteristic RF Input Power QFN-20 (4 x 4) Seating Plane Value 0.20 Ref. 15 dBm Mode Select Input Voltage 5.5 V Polarization Control Input Voltage 21 V Supply voltage 5.5 V Operating temperature -40 °C to +85 °C Storage temperature -65 °C to +150 °C CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. NOTE: Performance is guaranteed only under the conditions listed in the Operating Characteristics and the Typical Operating Conditions tables, and is not guaranteed over the full operating or storage temperature range in the Absolute Maximum Ratings table. Exceeding any of the conditions listed in athe Absolute Maximum Ratings table may result in permanent damage to the device. Operation at elevated temperatures may reduce reliability of the device. 4 0.02 + 0.03 0.02 – 0.02 Pin 1 Indicator 4 0.90 ± 0.10 2.70 + 0.10 2.70 – 0.15 1.35 + 0.05 1.35 – 0.07 Exposed Pad Detail A 1.35 + 0.05 1.35 – 0.07 2.70 + 0.10 2.70 – 0.15 Detail C Detail B 0.225 x 45 0.40 ± 0.10 Recommended Solder Reflow Profiles Refer to the “Recommended Solder Reflow Profile” Application Note. Detail A 0.25 + 0.05 0.25 – 0.07 Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. Detail C 0.5 Detail B Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 May 15, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200348 Rev. E DATA SHEET • SKY13292-365LF Pin Out VDD P0 B1 B2 NC 20 19 18 17 16 Out 1 1 15 Out 2 T1 2 14 T2 V1 3 13 V2 CR 4 12 CT I1 5 11 I3 SKY13292-365LF 6 7 8 9 10 GND I2 GND I4 GND Pin Descriptions Pin Number Pin Name 1 OUT1 RF Use O RF channel output #1: 250 MHz–2150 MHz Description 2 T1 AC I Tone detector input #1 3 V1 DC I Voltage detector input #1 4 CR DC - No connection. This pin must be left open. 5 I1 RF I RF Input #1: 250 MHz–2150 MHz 6, 8, 10 GND GND O RF GND 7 I2 RF I RF Input #2: 250 MHz–2150 MHz 9 I4 RF I RF Input #4: 250 MHz–2150 MHz 11 I3 RF I RF Input #3: 250 MHz–2150 MHz 12 CT DC - No connection. This pin must be left open. 13 V2 DC I Voltage detector Input #2 14 T2 AC I Tone detector input #2 15 OUT2 RF O RF channel output #2: 250 MHz–2150 MHz 16 N/C DC - No connection. This pin must be left open. 17 B2 DC I Mode control input 18 B1 DC I Mode control input 19 P0 DC I Mode control input 20 VDD DC I Supply voltage: 5 V Paddle GND RF – RF GND Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200348 Rev. E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 15, 2007 5 DATA SHEET • SKY13292-365LF Suggested Applications Circuit VDD B1 P0 B2 CBYPASS NC 20 19 18 17 16 DC Block Output 1 DC Block 1 15 2 14 Output 2 10 nF T1 10 nF T2 0 kΩ 0 kΩ SKY13292-365LF 3 13 V2 V1 CR RF Input 1 4 12 5 11 47 pF CT RF Input 3 47 pF 6 7 8 47 pF RF Input 2 The SKY13292-365LF is controlled by a pair of DC voltage levels, applied to V1 (pin 3) and V2 (pin 13), in combination with 22 kHz signal levels applied to T1 (pin 2) and T2 (pin 14). These signals are supplied from a set top box, receiver, etc., that is in turn controlled by the user. The configuration of the switch is controlled by the logic levels applied to P0 (pin 19), B1 (pin 18) and B2 (pin 17). The truth tables that describe the function of all of these control signals are elsewhere in this data sheet. A pair of SKY13292-365LF 4 x 2 switches can be utilized to form a 4 x 4 switch. Figure 2 shows a suggested implementation, in which one of the 4 x 2 switches is mounted on the top side of a printed circuit board, with the second 4 x 2 switch mounted on the back side of the printed circuit board. The four RF input signals, which may come from a variety of sources, but are shown here to come from four separate low noise block converters, are 9 10 47 pF RF Input 4 split and routed directly to the inputs of the top side switch, and through vias to the inputs of the back side switch. With each of the configuration inputs, P0, B1 and B2, of the top side switch held at 0 V, and each of the configuration inputs of the back side switch held at 5 V, the same logic controls from each of the 4 receivers will select any specific input signal. For example, if the user of receiver 1 wishes to receive the signal from antenna 1, polarization 1, through LNB A, that receiver must send a 22 kHz tone and a control voltage greater than the threshold voltage to switch 1. If receiver 3 also wishes to receive the signal from antenna 1, polarization 1, through LNB A, that receiver must also send a 22 kHz tone and a control voltage greater than the threshold voltage to switch 2. Other logic configurations are possible, as shown in the truth tables in this data sheet. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 May 15, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200348 Rev. E DATA SHEET • SKY13292-365LF 4 x 4 Switch Utilizing a SKY13292 on Top Side and a Second SKY13292-365LF on the Back Side of a PCB To STB Rx 1 Pol. 1 LNB A OUT 1 V1 T1 I1 Antenna 1 VDD I2 Pol. 2 LNB B Control Circuit Pol. 1 P0 = 0 V B1 = 0 V LNB C I4 I3 Antenna 2 B2 = 0 V OUT 2 Pol. 2 V2 T2 Switch 1 LNB D I1 OUT 1 To STB Rx 2 Top Side of PCB To STB Rx 3 Back Side of PCB T1 V1 I2 VDD Control Circuit P0 = 5 V B1 = 5 V I4 B2 = 5 V I3 Switch 2 OUT 2 V2 T2 To STB Rx 4 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200348 Rev. E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 15, 2007 7 DATA SHEET • SKY13292-365LF Truth Table - Mode Controls Summary Mode P0 B1 B2 I1 (PIN 5) I2 (PIN 7) I4 (PIN 9) I3 (PIN 11) 0 0 0 0 A B C D 1 0 0 1 A B D C 2 0 1 0 B A C D 3 0 1 1 B A D C 4 1 0 0 C D A B 5 1 0 1 C D B A 6 1 1 0 D C A B 7 1 1 1 D C B A I3 I1 I2 I4 Mode 0 (000): P0 = 0 V, B1 = 0 V, B2 = 0 V (Default Mode) I3 I1 I2 I4 Mode 1 (001): P0 = 0 V, B1 = 0 V, B2 = 5 V I3 I1 I2 I4 Mode 2 (010): P0 = 0 V, B1 = 5 V, B2 = 0 V I3 I1 I2 I4 Mode 3 (011): P0 = 0 V, B1 = 5 V, B2 = 5 V I3 I1 I2 I4 Mode 4 (100): P0 = 5 V, B1 = 0 V, B2 = 0 V I3 I1 I2 I4 Mode 5 (101): P0 = 5 V, B1 = 0 V, B2 = 5 V I3 I1 I2 I4 Mode 6 (110): P0 = 5 V, B1 = 5 V, B2 = 0 V I3 I1 I2 I4 Mode 7 (111): P0 = 5 V, B1 = 5 V, B2 = 5 V Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 May 15, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200348 Rev. E DATA SHEET • SKY13292-365LF General Truth Table Tone and Voltage Inputs (see notes) State T1 V1 T2 V2 Signal Paths 1 No tone VLOW 2 No tone VLOW No tone VLOW D → OUT1, D → OUT2 No tone VHIGH 3 No tone D → OUT1, B → OUT2 VLOW 22 kHz tone VLOW 4 D → OUT1, C → OUT2 No tone VLOW 22 kHz tone VHIGH D → OUT1, A → OUT2 5 No tone VHIGH No tone VLOW B → OUT1, D → OUT2 6 No tone VHIGH No tone VHIGH B → OUT1, B → OUT2 7 No tone VHIGH 22 kHz tone VLOW B → OUT1, C → OUT2 8 No tone VHIGH 22 kHz tone VHIGH B → OUT1, A → OUT2 9 22 kHz tone VLOW No tone VLOW C → OUT1, D → OUT2 10 22 kHz tone VLOW No tone VHIGH C → OUT1, B → OUT2 11 22 kHz tone VLOW 22 kHz tone VLOW C → OUT1, C → OUT2 12 22 kHz tone VLOW 22 kHz tone VHIGH C → OUT1, A → OUT2 13 22 kHz tone VHIGH No tone VLOW A → OUT1, D → OUT2 14 22 kHz tone VHIGH No tone VHIGH A → OUT1, B → OUT2 15 22 kHz tone VHIGH 22 kHz tone VLOW A → OUT1, C → OUT2 16 22 kHz tone VHIGH 22 kHz tone VHIGH A → OUT1, A → OUT2 Notes “No tone”: no 22 kHz tone present. “22 kHz tone”: 22 kHz tone present with amplitude greater than 100 mV (pk-pk). VLOW < 14 V. VHIGH > 15 V. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200348 Rev. E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 15, 2007 9 DATA SHEET • SKY13292-365LF PRELIMINARY DATA SHEET • SKY13292-365LF Truth Table - Tone and Voltage Controls Mode 0 (000): P0 = 0 V, B1 = 0 V, B2 = 0 V (Default State) Tone and Voltage Inputs (see notes) State T1 V1 T2 V2 Signal Paths 1 No tone VLOW No tone VLOW I3 → OUT1, I3 → OUT2 2 No tone VLOW No tone VHIGH I3 → OUT1, I2 → OUT2 3 No tone VLOW 22 kHz tone VLOW I3 → OUT1, I4 → OUT2 4 No tone VLOW 22 kHz tone VHIGH I3 → OUT1, I1 → OUT2 5 No tone VHIGH No tone VLOW I2→ OUT1, I3 → OUT2 6 No tone VHIGH No tone VHIGH I2→ OUT1, I2 → OUT2 7 No tone VHIGH 22 kHz tone VLOW I2→ OUT1, I4 → OUT2 8 No tone VHIGH 22 kHz tone VHIGH I2→ OUT1, I1 → OUT2 9 22 kHz tone VLOW No tone VLOW I4 → OUT1, I3 → OUT2 10 22 kHz tone VLOW No tone VHIGH I4 → OUT1, I2 → OUT2 11 22 kHz tone VLOW 22 kHz tone VLOW I4 → OUT1, I4 → OUT2 12 22 kHz tone VLOW 22 kHz tone VHIGH I4 → OUT1, I1 → OUT2 13 22 kHz tone VHIGH No tone VLOW I1 → OUT1, I3 → OUT2 14 22 kHz tone VHIGH No tone VHIGH I1 → OUT1, I2 → OUT2 15 22 kHz tone VHIGH 22 kHz tone VLOW I1 → OUT1, I4 → OUT2 16 22 kHz tone VHIGH 22 kHz tone VHIGH I1 → OUT1, I1 → OUT2 Mode 1 (001): P0 = 0 V, B1 = 0 V, B2 = 5 V Tone and Voltage Inputs (see notes) State T1 V1 T2 V2 Signal Paths 1 No tone VLOW No tone VLOW I4 → OUT1, I4 → OUT2 2 No tone VLOW No tone VHIGH I4 → OUT1, I2 → OUT2 3 No tone VLOW 22 kHz tone VLOW I4 → OUT1, I3 → OUT2 4 No tone VLOW 22 kHz tone VHIGH I4 → OUT1, I1 → OUT2 5 No tone VHIGH No tone VLOW I2 → OUT1, I4 → OUT2 6 No tone VHIGH No tone VHIGH I2 → OUT1, I2 → OUT2 7 No tone VHIGH 22 kHz tone VLOW I2 → OUT1, I3 → OUT2 8 No tone VHIGH 22 kHz tone VHIGH I2 → OUT1, I1 → OUT2 9 22 kHz tone VLOW No tone VLOW I3 → OUT1, I4 → OUT2 10 22 kHz tone VLOW No tone VHIGH I3 → OUT1, I2 → OUT2 11 22 kHz tone VLOW 22 kHz tone VLOW I3 → OUT1, I3 → OUT2 12 22 kHz tone VLOW 22 kHz tone VHIGH I3 → OUT1, I1 → OUT2 13 22 kHz tone VHIGH No tone VLOW I1 → OUT1, I4 → OUT2 14 22 kHz tone VHIGH No tone VHIGH I1 → OUT1, I2 → OUT2 15 22 kHz tone VHIGH 22 kHz tone VLOW I1 → OUT1, I3 → OUT2 16 22 kHz tone VHIGH 22 kHz tone VHIGH I1 → OUT1, I1 → OUT2 Notes “No tone”: no 22 kHz tone present. “22 kHz tone”: 22 kHz tone present with amplitude greater than 100 mV (pk-pk). VLOW < 14 V. VHIGH > 15 V Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 May 15, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200348 Rev. E DATA SHEET • SKY13292-365LF Mode 2 (010): P0 = 0 V, B1 = 5 V, B2 = 0 V Tone and Voltage Inputs (see notes) State T1 V1 T2 V2 Signal Paths 1 No tone VLOW No tone VLOW I3 → OUT1, I3 → OUT2 2 No tone VLOW No tone VHIGH I3 → OUT1, I1 → OUT2 3 No tone VLOW 22 kHz tone VLOW I3 → OUT1, I4 → OUT2 4 No tone VLOW 22 kHz tone VHIGH I3 → OUT1, I2 → OUT2 5 No tone VHIGH No tone VLOW I1 → OUT1, I3 → OUT2 6 No tone VHIGH No tone VHIGH I1 → OUT1, I1 → OUT2 7 No tone VHIGH 22 kHz tone VLOW I1 → OUT1, I4 → OUT2 8 No tone VHIGH 22 kHz tone VHIGH I1 → OUT1, I2 → OUT2 9 22 kHz tone VLOW No tone VLOW I4 → OUT1, I3 → OUT2 10 22 kHz tone VLOW No tone VHIGH I4 → OUT1, I1 → OUT2 11 22 kHz tone VLOW 22 kHz tone VLOW I4 → OUT1, I4 → OUT2 12 22 kHz tone VLOW 22 kHz tone VHIGH I4 → OUT1, I2 → OUT2 13 22 kHz tone VHIGH No tone VLOW I2 → OUT1, I3 → OUT2 14 22 kHz tone VHIGH No tone VHIGH I2 → OUT1, I1 → OUT2 15 22 kHz tone VHIGH 22 kHz tone VLOW I2 → OUT1, I4 → OUT2 16 22 kHz tone VHIGH 22 kHz tone VHIGH I2 → OUT1, I2 → OUT2 V2 Signal Paths Mode 3 (011): P0 = 0 V, B1 = 5 V, B2 = 5 V Tone and Voltage Inputs (see notes) State T1 V1 T2 1 No tone VLOW No tone VLOW I4 → OUT1, I4 → OUT2 2 No tone VLOW No tone VHIGH I4 → OUT1, I1 → OUT2 3 No tone VLOW 22 kHz tone VLOW I4 → OUT1, I3 → OUT2 4 No tone VLOW 22 kHz tone VHIGH I4 → OUT1, I2 → OUT2 5 No tone VHIGH No tone VLOW I1 → OUT1, I4 → OUT2 6 No tone VHIGH No tone VHIGH I1 → OUT1, I1 → OUT2 7 No tone VHIGH 22 kHz tone VLOW I1 → OUT1, I3 → OUT2 8 No tone VHIGH 22 kHz tone VHIGH I1 → OUT1, I2 → OUT2 9 22 kHz tone VLOW No tone VLOW I3 → OUT1, I4 → OUT2 10 22 kHz tone VLOW No tone VHIGH I3 → OUT1, I1 → OUT2 11 22 kHz tone VLOW 22 kHz tone VLOW I3 → OUT1, I3 → OUT2 I3 → OUT1, I2 → OUT2 12 22 kHz tone VLOW 22 kHz tone VHIGH 13 22 kHz tone VHIGH No tone VLOW I2 → OUT1, I4 → OUT2 14 22 kHz tone VHIGH No tone VHIGH I2 → OUT1, I1 → OUT2 15 22 kHz tone VHIGH 22 kHz tone VLOW I2 → OUT1, I3 → OUT2 16 22 kHz tone VHIGH 22 kHz tone VHIGH I2 → OUT1, I2 → OUT2 Notes “No tone”: no 22 kHz tone present. “22 kHz tone”: 22 kHz tone present with amplitude greater than 100 mV (pk-pk). VLOW < 14 V. VHIGH > 15 V Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200348 Rev. E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 15, 2007 11 DATA SHEET • SKY13292-365LF Mode 4 (100): P0 = 5 V, B1 = 0 V, B2 = 0 V Tone and Voltage Inputs (see notes) State T1 V1 T2 V2 Signal Paths 1 No tone VLOW No tone VLOW I2 → OUT1, I2 → OUT2 2 No tone VLOW No tone VHIGH I2 → OUT1, I3 → OUT2 3 No tone VLOW 22 kHz tone VLOW I2 → OUT1, I1 → OUT2 4 No tone VLOW 22 kHz tone VHIGH I2 → OUT1, I4 → OUT2 5 No tone VHIGH No tone VLOW I3 → OUT1, I2 → OUT2 6 No tone VHIGH No tone VHIGH I3 → OUT1, I3 → OUT2 7 No tone VHIGH 22 kHz tone VLOW I3 → OUT1, I1 → OUT2 8 No tone VHIGH 22 kHz tone VHIGH I3 → OUT1, I4 → OUT2 9 22 kHz tone VLOW No tone VLOW I1 → OUT1, I2 → OUT2 10 22 kHz tone VLOW No tone VHIGH I1 → OUT1, I3 → OUT2 11 22 kHz tone VLOW 22 kHz tone VLOW I1 → OUT1, I1 → OUT2 12 22 kHz tone VLOW 22 kHz tone VHIGH I1 → OUT1, I4 → OUT2 13 22 kHz tone VHIGH No tone VLOW I4 → OUT1, I2 → OUT2 14 22 kHz tone VHIGH No tone VHIGH I4 → OUT1, I3 → OUT2 15 22 kHz tone VHIGH 22 kHz tone VLOW I4 → OUT1, I1 → OUT2 16 22 kHz tone VHIGH 22 kHz tone VHIGH I4 → OUT1, I4 → OUT2 Mode 5 (101): P0 = 5 V, B1 = 0 V, B2 = 5 V Tone and Voltage Inputs (see notes) State T1 V1 T2 V2 Signal Paths 1 No tone VLOW No tone VLOW I2 → OUT1, I2 → OUT2 2 No tone VLOW No tone VHIGH I2 → OUT1, I4 → OUT2 3 No tone VLOW 22 kHz tone VLOW I2 → OUT1, I1 → OUT2 4 No tone VLOW 22 kHz tone VHIGH I2 → OUT1, I3 → OUT2 5 No tone VHIGH No tone VLOW I4 → OUT1, I2 → OUT2 6 No tone VHIGH No tone VHIGH I4 → OUT1, I4 → OUT2 7 No tone VHIGH 22 kHz tone VLOW I4 → OUT1, I1 → OUT2 8 No tone VHIGH 22 kHz tone VHIGH I4 → OUT1, I3 → OUT2 9 22 kHz tone VLOW No tone VLOW I1 → OUT1, I2 → OUT2 10 22 kHz tone VLOW No tone VHIGH I1 → OUT1, I4 → OUT2 11 22 kHz tone VLOW 22 kHz tone VLOW I1 → OUT1, I1 → OUT2 12 22 kHz tone VLOW 22 kHz tone VHIGH I1 → OUT1, I3 → OUT2 13 22 kHz tone VHIGH No tone VLOW I3 → OUT1, I2 → OUT2 14 22 kHz tone VHIGH No tone VHIGH I3 → OUT1, I4 → OUT2 15 22 kHz tone VHIGH 22 kHz tone VLOW I3 → OUT1, I1 → OUT2 16 22 kHz tone VHIGH 22 kHz tone VHIGH I3 → OUT1, I3 → OUT2 Notes “No tone”: no 22 kHz tone present. “22 kHz tone”: 22 kHz tone present with amplitude greater than 100 mV (pk-pk). VLOW < 14 V. VHIGH > 15 V Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12 May 15, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200348 Rev. E DATA SHEET • SKY13292-365LF Mode 6 (110): P0 = 5 V, B1 = 5 V, B2 = 0 V Tone and Voltage Inputs (see notes) State T1 V1 T2 V2 Signal Paths 1 No tone VLOW No tone VLOW I1 → OUT1, I1 → OUT2 2 No tone VLOW No tone VHIGH I1 → OUT1, I3 → OUT2 3 No tone VLOW 22 kHz tone VLOW I1 → OUT1, I2 → OUT2 4 No tone VLOW 22 kHz tone VHIGH I1 → OUT1, I4 → OUT2 5 No tone VHIGH No tone VLOW I3 → OUT1, I1 → OUT2 6 No tone VHIGH No tone VHIGH I3 → OUT1, I3 → OUT2 7 No tone VHIGH 22 kHz tone VLOW I3 → OUT1, I2 → OUT2 8 No tone VHIGH 22 kHz tone VHIGH I3 → OUT1, I4 → OUT2 9 22 kHz tone VLOW No tone VLOW I2 → OUT1, I1 → OUT2 10 22 kHz tone VLOW No tone VHIGH I2 → OUT1, I3 → OUT2 11 22 kHz tone VLOW 22 kHz tone VLOW I2 → OUT1, I2 → OUT2 12 22 kHz tone VLOW 22 kHz tone VHIGH I2 → OUT1, I4 → OUT2 13 22 kHz tone VHIGH No tone VLOW I4 → OUT1, I1 → OUT2 14 22 kHz tone VHIGH No tone VHIGH I4 → OUT1, I3 → OUT2 15 22 kHz tone VHIGH 22 kHz tone VLOW I4 → OUT1, I2 → OUT2 16 22 kHz tone VHIGH 22 kHz tone VHIGH I4 → OUT1, I4 → OUT2 Mode 7 (111): P0 = 5 V, B1 = 5 V, B2 = 5 V Tone and Voltage Inputs (see notes) State T1 V1 T2 V2 Signal Paths 1 No tone VLOW No tone VLOW I1 → OUT1, I1 → OUT2 2 No tone VLOW No tone VHIGH I1 → OUT1, I4 → OUT2 3 No tone VLOW 22 kHz tone VLOW I1 → OUT1, I2 → OUT2 4 No tone VLOW 22 kHz tone VHIGH I1 → OUT1, I3 → OUT2 5 No tone VHIGH No tone VLOW I4 → OUT1, I1 → OUT2 6 No tone VHIGH No tone VHIGH I4 → OUT1, I4 → OUT2 7 No tone VHIGH 22 kHz tone VLOW I4 → OUT1, I2 → OUT2 8 No tone VHIGH 22 kHz tone VHIGH I4 → OUT1, I3 → OUT2 9 22 kHz tone VLOW No tone VLOW I2 → OUT1, I1 → OUT2 10 22 kHz tone VLOW No tone VHIGH I2 → OUT1, I4 → OUT2 11 22 kHz tone VLOW 22 kHz tone VLOW I2 → OUT1, I2 → OUT2 12 22 kHz tone VLOW 22 kHz tone VHIGH I2 → OUT1, I3 → OUT2 13 22 kHz tone VHIGH No tone VLOW I3 → OUT1, I1 → OUT2 14 22 kHz tone VHIGH No tone VHIGH I3 → OUT1, I4 → OUT2 15 22 kHz tone VHIGH 22 kHz tone VLOW I3 → OUT1, I2 → OUT2 16 22 kHz tone VHIGH 22 kHz tone VHIGH I3 → OUT1, I3 → OUT2 Notes “No tone”: no 22 kHz tone present. “22 kHz tone”: 22 kHz tone present with amplitude greater than 100 mV (pk-pk). VLOW < 14 V. VHIGH > 15 V Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200348 Rev. E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 15, 2007 13 DATA SHEET • SKY13292-365LF Copyright © 2002, 2003, 2004, 2005, 2006, 2007, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 14 May 15, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200348 Rev. E