SGB10UFSMS thru SGB35UFSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 60 mAMP 1000-3500 VOLTS 60 nsec HIGH VOLTAGE RECTIFIER Part Number / Ordering Information 1/ SGB _ _ UF SMS __ 2/ L Screening = None ⏐ ⏐ ⏐ TX = TX Level ⏐ ⏐ ⏐ TXV = TXV Level ⏐ ⏐ ⏐ S = S Level ⏐ ⏐ ⏐ Package L ⏐ ⏐ SMS = Surface Mount Square Tab ⏐ L Recovery Time ⏐ UF = Ultra Fast ⏐ Voltage L 10 = 1000 V 15 = 1500 V 20 = 2000 V 25 = 2500 V 30 = 3000 V 35 = 3500 V FEATURES: • • • • • • • • Ultra Fast Recovery: 60 nsec Maximum PIV to 3500 Volts Hermetically Sealed Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature Micro Miniature Package TX, TXV, and Space Level Screening Available2/ ELECTRICAL CHARACTERISTICS Part Number Peak Inverse Voltage Average Rectified Current Maximum Reverse Current Maximum Forward Voltage Maximum Surge Current (1 Cycle) Maximum Reverse Recovery Time Maximum Junction Capacitance Typical Thermal Impedance Symbol PIV I0 IR@PIV VF4/ IFSM tRR7/ CJ θJE mA μA Volts Amps nsec pF °C/W 165 165 165 165 165 165 Units Conditions SGB10UFSMS SGB15UFSMS SGB20UFSMS SGB25UFSMS SGB30UFSMS SGB35UFSMS Volts 1000 1500 2000 2500 3000 3500 25°C 100°C 25°C 100°C 25°C 25°C 25°C VR = 100V fT = 1MHZ 60 60 60 60 60 60 50 50 50 50 50 50 0.1 0.1 0.1 0.1 0.1 0.1 10 10 10 10 10 10 9.5 9.5 9.5 9.5 9.5 9.5 5 5 5 5 5 5 60 60 60 60 60 60 1.0 1.0 1.0 1.0 1.0 1.0 1/ For Ordering Information, Price, and Availability – Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material. 4/ IF = IO; Max. forward voltage measured with instantaneous forward pulse of 300µsec minimum. 5/ Max. lead temperature for soldering is 250°C, 3/8” from case for 5 sec maximum. 6/ Operating and storage temperature: -65°C to +175°C. 7/ Reverse Recovery Test Conditions: IF=50mA, IR=100mA, IRR=25mA, TA=25°C. 8/ Consult manufacturing for operating curves. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0005E Surface Mount Square Tab DOC SGB10UFSMS thru SGB35UFSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com PACKAGE OUTLINE: Surface Mount Square Tab B DIMENSIONS DIM A A C MIN MAX A 0.090” 0.100” B 0.150” 0.210” C 0.022” 0.028” D 0.002” –– D Dimensions are prior to soldering. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0005E DOC