TOSHIBA RN49A2

RN49A2
TOSHIBA Transistor Silicon NPN-PNP Epitaxial Type
(PCT process) (Bias Resistor Built-in Transistor)
RN49A2
Switching, Inverter Circuit, Interface Circuit and
Driver Circuit Applications.
•
Unit: mm
Two devices are incorporated into an Ultra-Super-Mini (6-pin)
package.
•
Incorporating a bias resistor into a transistor reduces the parts count.
Reducing the parts count enables the manufacture of ever more
compact equipment and lowers assembly cost.
Equivalent Circuit and Bias Resistor Values
Q1
Q2
C
R1
R1
R2
B
R2
B
C
E
E
JEDEC
―
JEITA
―
Q1
TOSHIBA
R1: 47 kΩ, R2: 47 kΩ
Weight: 0.006g (typ.)
2-2J1A
Q2
R1: 2.2 kΩ, R2: 47 kΩ
Q1: RN1104F equivalent
Q2: RN2105F equivalent
Marking
6
Equivalent Circuit (top view)
5
6
4
28
1
2
5
Q2
Q1
1
3
1
4
2
3
2007-11-01
RN49A2
Absolute Maximum Ratings (Ta = 25°C) (Q1)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
50
V
Collector-emitter voltage
VCEO
50
V
Emitter-base voltage
VEBO
10
V
IC
100
mA
Collector current
Absolute Maximum Ratings (Ta = 25°C) (Q2)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
−50
V
Collector-emitter voltage
VCEO
−50
V
Emitter-base voltage
VEBO
−5
V
IC
−100
mA
Collector current
Absolute Maximum Ratings (Ta = 25°C) (Q1, Q2 common)
Characteristics
Collector power dissipation
Junction temperature
Storage temperature range
Note:
Symbol
PC (Note 1)
Rating
Unit
200
mW
Tj
150
°C
Tstg
−55~150
°C
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Total rating
2
2007-11-01
RN49A2
Electrical Characteristics (Ta = 25°C) (Q1)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
ICBO
VCB = 50 V, IE = 0
⎯
⎯
−100
ICEO
VCE = 50 V, IB = 0
⎯
⎯
−500
Emitter cut-off current
IEBO
VEB = 10 V, IC = 0
0.082
⎯
0.15
DC current gain
hFE
VCE = 5 V, IC = 10 mA
80
⎯
⎯
VCE (sat)
IC = 5 mA, IB = 0.25 mA
⎯
0.1
0.3
V
Input voltage (ON)
VI (ON)
VCE = 0.2 V, IC = 5 mA
1.5
⎯
5.0
V
Input voltage (OFF)
VI (OFF)
VCE = 5 V, IC = 0.1 mA
1.0
⎯
1.5
V
Transition frequency
fT
VCE = 10 V, IC = 5 mA
⎯
250
⎯
MHz
VCB = 10 V, IE = 0, f = 1 MHz
⎯
3
⎯
pF
Collector cut-off current
Collector-emitter saturation voltage
nA
mA
Collector output capacitance
Cob
Input resistance
R1
⎯
32.9
47
61.1
kΩ
Resistance ratio
R1/R2
⎯
0.9
1.0
1.1
⎯
Test Condition
Min
Typ.
Max
Unit
Electrical Characteristics (Ta = 25°C) (Q2)
Characteristics
Symbol
ICBO
VCB = −50 V, IE = 0
⎯
⎯
−100
ICEO
VCE = −50 V, IB = 0
⎯
⎯
−500
Emitter cut-off current
IEBO
VEB = −5 V, IC = 0
−0.078
⎯
−0.145
DC current gain
hFE
VCE = −5 V, IC = −10 mA
80
⎯
⎯
VCE (sat)
IC = −5 mA, IB = −0.25 mA
⎯
−0.1
−0.3
V
Input voltage (ON)
VI (ON)
VCE = −0.2 V, IC = −5 mA
−0.6
⎯
−1.1
V
Input voltage (OFF)
VI (OFF)
VCE = −5 V, IC = −0.1 mA
−0.5
⎯
−0.8
V
Transition frequency
fT
VCE = −10 V, IC = −5 mA
⎯
200
⎯
MHz
⎯
3
⎯
pF
1.54
2.2
2.86
kΩ
Collector cut-off current
Collector-emitter saturation voltage
VCB = −10 V, IE = 0, f = 1 MHz
Collector output capacitance
Cob
Input resistance
R1
⎯
Resistance ratio
R1/R2
⎯
f=1MHz
3
0.0421 0. 0468 0.0 515
nA
mA
⎯
2007-11-01
RN49A2
Q1
4
2007-11-01
RN49A2
Q2
5
2007-11-01
RN49A2
Q1,Q2 COMMON
PC – Ta
COLLECTER POWER DISSIPATION
PC(mW)
400
300
200
100
0
0
25
50
75
100
125
150
175
AMBIENT TEMPERATURE Ta (°C)
6
2007-11-01
RN49A2
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
7
2007-11-01