TOSHIBA HN1D01FE

HN1D01FE
TOSHIBA Diode Silicon Epitaxial Planar Type
HN1D01FE
Ultra High Speed Switching Application
Unit in mm
z HN1D02FU is composed of 2 unit of cathode common.
z Low forward voltage
: VF (3) = 0.92V (typ.)
z Fast reverse recovery time : trr = 1.6ns (typ.)
z Small total capacitance
: CT = 2.2pF (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
VRM
85
V
Reverse voltage
VR
80
V
Maximum (peak) forward current
IFM
300*
mA
Average forward current
IO
100*
mA
IFSM
2*
A
Power dissipation
P
100**
mW
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55~150
°C
Maximum (peak) reverse voltage
Surge current (10ms)
1.
2.
3.
4.
5.
6.
CATHODE
CATHODE
ANODE
CATHODE
CATHODE
ANODE
―
―
JEDEC
JEITA
Note: Using continuously under heavy loads (e.g. the application of high
1-2X1A
TOSHIBA
temperature/current/voltage and the significant change in
Weight: 0.003g (typ.)
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are
within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
*: These are the Absolute Maximum Ratings for a single diode (Q1, Q2, Q3 or Q4).
Where Unit 1 and Unit 2 are used independently or simultaneously, the Absolute Maximum Ratings per diode
are 75% of those for a single diode.
** : Total rating.
Electrical Characteristics (Q1, Q2, Q3, Q4 Common; Ta = 25°C)
Characteristic
Symbol
Test
Circuit
VF (1)
―
VF (2)
VF (3)
Min
Typ.
Max
IF = 1mA
―
0.61
―
―
IF = 10mA
―
0.74
―
―
IF = 100mA
―
0.92
1.20
IR (1)
―
VR = 30V
―
―
0.1
IR (2)
―
VR = 80V
―
―
0.5
Total capacitance
CT
―
VR = 0, f = 1MHz
―
2.2
―
pF
Reverse recovery time
trr
―
IF = 10mA (fig.1)
―
1.6
―
ns
Forward voltage
Reverse current
Test Condition
1
Unit
V
μA
2007-11-01
HN1D01FE
Pin Assignment (Top View)
6
5
Unit 1 1
Unit 2
Q3
Q4
Q1
4
Marking
A2
Q2
2
3
Fig. 1 Reverse Recovery Time (trr) Test Circuit
2
2007-11-01
HN1D01FE
(A)
10u
1u
100nA
10nA
1nA
3
2007-11-01
HN1D01FE
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
4
2007-11-01