AZ956P MICROMINIATURE POLARIZED BISTABLE (LATCHING) RELAY FEATURES • Microminiature size: up to 50% less board area than previous generation telecom relays • Meets FCC Part 68.302 1500 V lightning surge • High dielectric and surge voltage: • Low power consumption: 36 mW pickup • Stable contact resistance for low level signal switching • Epoxy sealed • UL, CUR file E43203 • All plastics meet UL94 V–O, 30 min. oxygen index CONTACTS GENERAL DATA Arrangement SPDT (1 Form C) Bifurcated crossbar contacts Ratings Resistive load: Life Expectancy Mechanical Electrical Minimum operations 1 x 109 2.5 x 105 at 0.4 A, 125 VAC, resistive 3 x 106 at 1.0 A, 24 VDC, resistive Set Time (typical) 1 ms at nominal coil voltage Reset Time (typical) 0.9 ms at nominal coil voltage 0.5 A at 120 VAC 1.0 A at 30 VDC Bounce (typical) At 10 mA contact current 1 ms at set or reset Material Palladium nickel with gold-rhodium overlay Resistance < 50 milliohms initally (6 V, 10 mA method) Dielectric Strength (at sea level) 1500 Vrms contact to coil 500 Vrms between open contacts Insulation Resistance 109 ohms min. at 25°C, 500 VDC, 50% RH Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration Operational, 40 g, 10–200 Hz Shock Operational, 50 g min., 11 ms Non-destructive, 150 g min., 11 ms Max. Solder Temp. Temp./Time Vapor phase: 215°C, 40 Sec. Infrared: 215°C, 40 Sec. Double wave: 260°C, 10 Sec. Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 1.8 grams Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. switched power: 30 W or 60 VA Max. switched current: 1.0 A Max. switched voltage: 150 VDC or 125 VAC Rated Load UL, CUR COIL (Polarized) Power At Pickup Voltage (typical) 36 mW Max. Continuous Dissipation 0.5 W at 20°C (68°F) Temperature Rise At nominal coil voltage 8°C (15°F) Temperature Max. 105°C (221°F) NOTES 1. All values at 20°C (68°F). 2. Relay may set or reset in with less than “Must Operate” value. 3. Relay has fixed coil polarity. 4. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-13 AZ956P AZ RELAY ORDERING DATA STANDARD SINGLE COIL Nominal Coil VDC 1.5 Max. Operating VDC 6 3 13 5 9 12 Order Number Coil Resistance ± 10% 61 Must Operate VDC 1.13 THT Through Hole AZ956P1–1.5DE AZ956P1S–1.5DE SMT 300 2.25 AZ956P1–3DE AZ956P1S–3DE 20 740 3.75 AZ956P1–5DE AZ956P1S–5DE 35 50 2,160 4,500 6.75 9.00 AZ956P1–9DE AZ956P1–12DE AZ956P1S–9DE AZ956P1S–12DE 15 50 4,500 11.30 AZ956P1–15DE AZ956P1S–15DE 24 50 4,500 18.00 AZ956P1–24DE AZ956P1S–24DE STANDARD DUAL COIL Nominal Coil VDC 1.5 Order Number Max. Operating VDC 4.25 3 8.55 5 9 12 15 Coil Resistance ± 10% 32 Must Operate VDC 1.13 THT Through Hole AZ956P2–1.5DE AZ956P2S–1.5DE SMT 130 2.25 AZ956P2–3DE AZ956P2S–3DE 14.75 390 3.75 AZ956P2–5DE AZ956P2S–5DE 25.60 29.00 1,200 1,500 6.75 9.00 AZ956P2–9DE AZ956P2–12DE AZ956P2S–9DE AZ956P2S–12DE 29.00 1,500 11.30 AZ956P2–15DE AZ956P2S–15DE MECHANICAL DATA THT SMT .006 (.15) .08 MAX (2) PC BOARD LAYOUT PC BOARD LAYOUT Viewed toward terminals Viewed toward terminals Wiring Diagram Viewed toward terminals Dual Coil Latching Shown in reset position Single Coil Latching Shown in reset Position Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-13