NID5001N Self−Protected FET with Temperature and Current Limit HDPlus devices are an advanced series of power MOSFETs which utilize ON Semicondutor’s latest MOSFET technology process to achieve the lowest possible on−resistance per silicon area while incorporating smart features. Integrated thermal and current limits work together to provide short circuit protection. The devices feature an integrated Drain−to−Gate Clamp that enables them to withstand high energy in the avalanche mode. The Clamp also provides additional safety margin against unexpected voltage transients. Electrostatic Discharge (ESD) protection is provided by an integrated Gate−to−Source Clamp. http://onsemi.com VDSS (Clamped) RDS(ON) TYP ID MAX (Limited) 42 V 23 mW @ 10 V 33 A* *Max current may be limited below this value depending on input conditions. Drain Features • • • • • • • • • Low RDS(on) Current Limitation Thermal Shutdown with Automatic Restart Short Circuit Protection IDSS Specified at Elevated Temperature Avalanche Energy Specified Slew Rate Control for Low Noise Switching Overvoltage Clamped Protection Pb−Free Package is Available Gate Input RG Overvoltage Protection MPWR ESD Protection Temperature Limit Current Limit Current Sense Source MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Symbol Value Unit Drain−to−Source Voltage Internally Clamped VDSS 42 Vdc Drain−to−Gate Voltage Internally Clamped (RGS = 1.0 MW) VDGR 42 Vdc Rating Gate−to−Source Voltage VGS Drain Current − Continuous ID Total Power Dissipation @ TA = 25°C (Note 1) @ TA = 25°C (Note 1) @ TA = 25°C (Note 2) PD "14 Vdc Internally Limited W 64 1.0 1.56 Thermal Resistance, Junction−to−Case Junction−to−Ambient (Note 1) Junction−to−Ambient (Note 2) RqJC RqJA RqJA 1.95 120 80 °C/W Single Pulse Drain−to−Source Avalanche Energy (VDD = 25 Vdc, VGS = 5.0 Vdc, IL = 4.5 Apk, L = 120 mH, RG = 25 W) EAS 1215 mJ Operating and Storage Temperature Range April, 2006 − Rev. 8 Y WW D5001N G −55 to 150 °C 1 2 3 = Year = Work Week = Device Code = Pb−Free Package YWW D50 01NG 1 = Gate 2 = Drain 3 = Source ORDERING INFORMATION NID5001NT4 NID5001NT4G TJ, Tstg 1 DPAK CASE 369C STYLE 2 Device Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Minimum FR4 PCB, steady state. 2. Mounted onto a 2″ square FR4 board (1″ square, 2 oz. Cu 0.06″ thick single−sided, t = steady state). © Semiconductor Components Industries, LLC, 2006 MARKING DIAGRAM Package Shipping† DPAK 2500/Tape & Reel DPAK (Pb−Free) 2500/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Publication Order Number: NID5001N/D NID5001N MOSFET ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Characteristic Symbol Drain−to−Source Clamped Breakdown Voltage (VGS = 0 Vdc, ID = 250 mAdc) (VGS = 0 Vdc, ID = 250 mAdc, TJ = 150°C) V(BR)DSS Min Typ Max Unit 42 42 46 44 50 50 Vdc 1.5 6.5 5.0 50 100 mAdc 1.8 5.0 2.0 Vdc −mV/°C 23 43 29 55 28 50 34 60 VSD 0.80 1.1 V VGS = 5.0 Vdc, VDD = 25 Vdc ID = 1.0 Adc, Ext RG = 2.5 W T(on) 32 40 ms T(off) 68 75 VGS = 10 Vdc, VDD = 25 Vdc, ID = 1.0 Adc, Ext RG = 2.5 W T(on) 11 15 T(off) 86 95 Slew Rate On RL = 4.7 W, Vin = 0 to 10 V, VDD = 12 V −dVDS/dton 0.5 V/ms Slew−Rate Off RL = 4.7 W, Vin = 10 to 0 V, VDD = 12 V dVDS/dtoff 0.35 V/ms OFF CHARACTERISTICS Zero Gate Voltage Drain Current (VDS = 32 Vdc, VGS = 0 Vdc) (VDS = 32 Vdc, VGS = 0 Vdc, TJ = 150°C) IDSS Gate Input Current (VGS = 5.0 Vdc, VDS = 0 Vdc) IGSSF mAdc ON CHARACTERISTICS Gate Threshold Voltage (VDS = VGS, ID = 1.2 mAdc) Threshold Temperature Coefficient VGS(th) Static Drain−to−Source On−Resistance (Note 3) (VGS = 10 Vdc, ID = 5.0 Adc, TJ @ 25°C) (VGS = 10 Vdc, ID = 5.0 Adc, TJ @ 150°C) RDS(on) Static Drain−to−Source On−Resistance (Note 3) (VGS = 5.0 Vdc, ID = 5.0 Adc, TJ @ 25°C) (VGS = 5.0 Vdc, ID = 5.0 Adc, TJ @ 150°C) RDS(on) 1.0 Source−Drain Forward On Voltage (IS = 5 A, VGS = 0 V) mW mW SWITCHING CHARACTERISTICS Turn−on Time Turn−off Time Turn−on Time Turn−off Time SELF PROTECTION CHARACTERISTICS (TJ = 25°C unless otherwise noted) Current Limit (VGS = 5.0 Vdc) VDS = 10 V (VGS = 5.0 Vdc, TJ = 150°C) ILIM 30 19 36 30 29 13 41 24 49 31 TLIM(off) 150 175 200 °C TLIM(on) 135 160 185 °C TLIM(off) 150 165 185 °C TLIM(on) 135 150 170 °C (VGS = 10 Vdc) VDS = 10 V (VGS = 10 Vdc, TJ = 150°C) Temperature Limit (Turn−off) VGS = 5.0 Vdc Temperature Limit (Circuit Reset) VGS = 5.0 Vdc Temperature Limit (Turn−off) VGS = 10 Vdc Temperature Limit (Circuit Reset) VGS = 10 Vdc Adc 21 12 ESD ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Electro−Static Discharge Capability Human Body Model (HBM) Machine Model (MM) ESD V 4000 400 3. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%. http://onsemi.com 2 NID5001N TYPICAL PERFORMANCE CURVES ID, DRAIN CURRENT (AMPS) VGS = 10 V to 4.2 V 28 4V 3.8 V 24 ID, DRAIN CURRENT (AMPS) 28 3.6 V 20 TJ = 25°C 3.4 V 16 3.2 V 12 3.0 V 8 2.8 V 4 2.6 V 0 20 TC = −55°C 16 12 8 25°C 4 100°C 0.5 1 1.5 2 2.5 3 3.5 4 VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) 1 2 3 VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) 24 0 0 0.2 ID = 5 A TJ = 25°C 0.15 0.1 0.05 0 2 3 5 4 6 7 8 9 VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) 10 4 0.035 TJ = 25°C 0.03 VGS = 5 V 0.025 VGS = 10 V 0.02 0.015 2 3 4 5 6 7 8 9 10 ID, DRAIN CURRENT (AMPS) Figure 4. On−Resistance vs. Drain Current and Gate Voltage Figure 3. On−Resistance vs. Gate−to−Source Voltage 1.6 100000 ID = 5 A VGS = 10 V VGS = 0 V 1.4 IDSS, LEAKAGE (A) RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED) VDS ≥ 10 V 10000 1.2 1 TJ = 150°C 1000 TJ = 100°C 0.8 0.6 −50 −25 0 25 50 75 100 100 10 15 20 25 30 35 40 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current vs. Voltage http://onsemi.com 3 45 NID5001N TYPICAL PERFORMANCE CURVES 100 VGS = 0 V TJ = 25°C 0.12 I D , DRAIN CURRENT (AMPS) IS, SOURCE CURRENT (AMPS) 0.14 0.1 0.08 0.06 0.04 VGS = 5 V SINGLE PULSE TC = 25°C 10 dc 1.0 0.1 0.5 0.6 0.7 0.8 0.1 0.9 100 ms RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT 0.01 0.4 10 ms 1 ms 0.02 0 0.3 Based upon a TJ = 100°C, Steady State. 1.0 10 VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS) Figure 8. Maximum Rated Forward Biased Safe Operating Area Figure 7. Diode Forward Voltage vs. Current http://onsemi.com 4 100 NID5001N PACKAGE DIMENSIONS DPAK CASE 369C−01 ISSUE O C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. SEATING PLANE −T− E R 4 Z A S 1 2 DIM A B C D E F G H J K L R S U V Z 3 U K F J L H D G 2 PL 0.13 (0.005) M T MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.57 5.45 0.63 1.01 0.51 −−− 0.89 1.27 3.93 −−− STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN SOLDERING FOOTPRINT* 6.20 0.244 INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.180 0.215 0.025 0.040 0.020 −−− 0.035 0.050 0.155 −−− 3.0 0.118 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 5 For additional information, please contact your local Sales Representative. NID5001/D