OC100 Opto Coupler ABSOLUTE MAXIMUM RATINGS LED ELECTRICAL CHARACTERISTICS LED • Forward DC Current 100 mA • Forward Voltage (If = 100 mA) 1.5 V • Surge Current 2.5 A • Reverse Leakage Current 10nA • Reverse Voltage 5V • Power Dissipation (25°C) 200 mW Photodiode • Foward Voltage (If = 0.6 A) • Reverse Voltage 10,000 V • Power Dissipation 1.0 W _____________________________________________________ • Storage Temperature VR = 5 V Photodiode 12.0 V MAX • Reverse Leakage Current VR = 10 kV, ILED = 0 mA 250 nA Typical VR = 10 kV, ILED = 100 mA 100 µA Typical -40°C to +125°C Coupled • Operating Temperature -40°C to +100°C • DC Current Transfer Ratio 0.1% • Isolation Test Voltage 25 kV (From Pins 1, 2, 3 • TON 2 µs & 4 to Pins 5 & 6) • TOFF 2 µs (25°C UNLESS OTHERWISE NOTED) VOLTAGE MULTIPLIERS INC. 8711 W. Roosevelt Ave. Visalia, CA 93291 TEL 559-651-1402 FAX 559-651-0740 www.voltagemultipliers.com OC100 10 kV Power Supply Feedback & Control Typical HV Linear Regulator Circuit Select resistor value to optimize circuit for VOUT and IOUT range. PHOTODIODE REVERSE CURRENT VS. TEMPERATURE AT Vrwm 1000.0 OPTOCOUPLER GAIN VS. TEMPERATURE 0.16 0.12 100.0 Percent Gain Reverse Current (uA) 0.14 0.10 0.08 10.0 0.06 0.04 1.0 25 50 75 100 Temperature (°C) (C) Temperature 125 150 0.02 -25 0 25 50 75 100 Temperature (°C) 125 150