STK7002F Semiconductor N-Channel Enhancement-Mode MOSFET Description • High speed switching application. Features • High density cell design for low RDS(ON). • Voltage controlled small signal switch • High saturation current capability. Ordering Information Type NO. Marking STK7002F K702 Package Code SOT-23F Outline Dimensions unit : mm 2.3~2.5 1.5~1.7 1.90 BSC 0.35~0.45 3 KST-2138-001 0.8~1.0 0.1~0.2 2 0~0.1 2.8~3.0 1 PIN Connections 1. Gate 2. Source 3. Drain 1 STK7002F Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Drain-Source voltage VDSS 60 V Gate-Source voltage VGS ±20 V ID 115 mA IDP * 800 mA PD 200 mW RthJA 625 °C/W TJ , Tstg -55~150 °C Maximum Drain current Pulsed Drain Current Power dissipation Maximum Junction-to-Ambient Operating Junction and Storage temperature range * PW ≤ 10 ㎲, Duty cycle ≤ 1% Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Drain-Source breakdown voltage BVDSS ID=10 ㎲, VGS=0 Gate-Threshold voltage VGS(th) Min. Typ. Max. Unit 60 - - V ID=0.25 ㎃, VDS=VGS 1 2.0 2.5 V Zero Gate voltage drain current IDSS VDS=60V, VGS=0 - - 1 µA Gate-body leakage IGSS VDS=0V, VGS=±20V - - ±100 nA VGS=5V, ID=50mA - 3.2 7.5 Ω VGS=10V, ID=500mA - 2.4 7.5 Ω 80 - - mS - 22 50 - 11 25 - 2 5 - 7 20 ns - 11 20 ns Drain-Source on-resistance RDS(ON) * Forward trans-.conductance gfs Input capacitance Ciss Output capacitance Coss Reverse Transfer capacitance Crss Turn-on time tON Turn-off time tOFF VDS=10V, ID=0.2A VDS=25V, VGS=0, f=1MHz VDD=30V, ID=0.2A VGS=10V, RG=25Ω pF * PW ≤300 ㎲, Duty cycle ≤1% KST-2138-001 2 STK7002F Electrical Characteristic Curves Fig. 1 ID - VDS Fig. 2 ID - VGS Fig. 3 RDS(on) - ID Fig. 4 C - VDS Fig. 5 VGS - Qg Fig. 6 RDS(on) - TJ KST-2138-001 3 STK7002F Fig. 7 RDS(on) - VGS Fig. 8 IS - VSD Fig. 9 VGS(th) - TJ µ KST-2138-001 4 STK7002F These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KST-2138-001 5