ZETEX ZXTN07045EFF

ZXTN07045EFF
45V, SOT23F, NPN high gain power transistor
Summary
BVCEO > 45V
BVECO > 6V
IC(cont) = 4A
VCE(sat) < 80mV @ 1A
RCE(sat) = 50m⍀
PD = 1.5W
Complementary part number ZXTP07040DFF
Description
C
This low voltage NPN transistor has been designed for applications
requiring high gain and very low saturation voltage. The SOT23F
package is pin compatible with the industry standard SOT23 footprint
but offers lower profile and higher dissipation for applications where
power density is of utmost importance.
B
Features
E
•
Low profile SOT23F package
•
Low saturation voltage
•
High gain
•
High power dissipation
E
Applications
C
•
Boost converters
•
Lamp and relay driver
•
Siren driver
•
MOSFET and IGBT gate driving
•
Motor drive
B
Pinout - top view
Ordering information
Device
ZXTN07045EFFTA
Reel size
(inches)
Tape width
(mm)
Quantity
per reel
7
8
3000
Device marking
1D4
Issue 2 - January 2007
© Zetex Semiconductors plc 2007
1
www.zetex.com
ZXTN07045EFF
Absolute maximum ratings
Parameter
Symbol
Limit
Unit
Collector-base voltage
VCBO
45
V
Collector-emitter voltage
VCEO
45
V
Emitter-collector voltage (reverse blocking)
VECO
6
V
Emitter-base voltage
VEBO
7
V
Continuous collector current(c)
IC
4
A
Base current
IB
1
A
Peak pulse current
ICM
6
A
Power dissipation at Tamb=25°C(a)
PD
0.84
W
6.72
mW/°C
1.34
W
10.72
mW/°C
1.50
W
12.0
mW/°C
2.0
W
16.0
mW/°C
Tj, Tstg
- 55 to 150
°C
Linear derating factor
Power dissipation at Tamb
PD
=25°C(b)
Linear derating factor
PD
Power dissipation at Tamb=25°C(c)
Linear derating factor
PD
Power dissipation at Tamb=25°C(d)
Linear derating factor
Operating and storage temperature range
Thermal resistance
Parameter
Symbol
Limit
Unit
ambient(a)
R⍜JA
149
°C/W
Junction to ambient(b)
R⍜JA
93
°C/W
Junction to ambient(c)
R⍜JA
83
°C/W
Junction to ambient(d)
R⍜JA
60
°C/W
Junction to
NOTES:
(a) For a device surface mounted on 15mm x 15mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in
still air conditions.
(b) Mounted on 25mm x 25mm x 1.6mm FR4 PCB with a high coverage of single sided 2 oz copper in still air conditions.
(c) Mounted on 50mm x 50mm x 1.6mm FR4 PCB with a high coverage of single sided 2 oz copper in still air conditions.
(d) As (c) above measured at t<5secs.
Issue 2 - January 2007
© Zetex Semiconductors plc 2007
2
www.zetex.com
ZXTN07045EFF
Characteristics
Issue 2 - January 2007
© Zetex Semiconductors plc 2007
3
www.zetex.com
ZXTN07045EFF
Electrical characteristics (at Tamb = 25°C unless otherwise stated)
Parameter
Collector-base breakdown
voltage
Collector-emitter breakdown
voltage (base open)
Emitter-base breakdown
voltage
Emitter-collector breakdown
voltage (reverse blocking)
Symbol
BVCBO
Min.
45
Typ.
160
Max.
Unit
V
Conditions
IC = 100␮A
BVCEO
45
60
V
IC = 10mA (*)
BVEBO
7
8.3
V
IE = 100␮A
BVECX
6
8.2
V
IE = 100␮A, RBC < 1k⍀ or
0.25V > VBC > -0.25V
Emitter-collector breakdown BVECO
voltage (base open)
Collector-base cut-off current ICBO
6
7.2
V
IE = 100␮A,
<1
50
20
nA
␮A
VCB = 35V
VCB = 35V, Tamb= 100°C
Emitter-base cut-off current
IEBO
<1
50
nA
VEB = 5.6V
Collector-emitter saturation
voltage
VCE(sat)
40
65
mV
IC = 0.1A, IB = 0.5mA(*)
140
190
mV
IC = 1A, IB = 5mA(*)
60
80
mV
IC = 1A, IB = 100mA(*)
180
220
mV
IC = 2A, IB = 20mA(*)
270
340
mV
IC = 4A, IB = 80mA(*)
950
1050
mV
IC = 4A, IB = 80mA(*)
875
1000
mV
IC = 4A, VCE = 2V(*)
500
800
1500
400
710
IC = 1A, VCE = 2V(*)
250
530
IC = 2A, VCE = 2V(*)
70
125
IC = 4A, VCE = 2V(*)
150
190
MHz
pF
VEB = 0.5V, f = 1MHz(*)
pF
VCB = 10V, f = 1MHz(*)
VCC = 10V.
IC = 500mA,
IB1 = IB2= 50mA.
Base-emitter saturation
VBE(sat)
voltage
Base-emitter turn-on voltage VBE(on)
Static forward current
transfer ratio
hFE
IC = 0.1A, VCE = 2V(*)
Transition frequency
fT
Input capacitance
Cibo
225
Output capacitance
Cobo
18.4
Delay time
td
22.3
ns
Rise time
tr
10.6
ns
Storage time
ts
613
ns
Fall time
tf
146
ns
25
IC = 50mA, VCE = 5V
f = 50MHz
NOTES:
(*) Measured under pulsed conditions. Pulse width ⱕ300␮s; duty cycle ⱕ2%.
Issue 2 - January 2007
© Zetex Semiconductors plc 2007
4
www.zetex.com
ZXTN07045EFF
Typical characteristics
Issue 2 - January 2007
© Zetex Semiconductors plc 2007
5
www.zetex.com
ZXTN07045EFF
Package outline - SOT23F
c
D
b
e1
b
e
L1
L
E
E1
b
E2
A1
R
A
Dim.
Millimeters
Inches
Min.
Max.
Min.
Max.
A
0.80
1.00
0.0315
0.0394
A1
0.00
0.10
0.00
b
0.35
0.45
c
0.10
D
2.80
e
e1
Millimeters
Inches
Min.
Max.
Max.
Max.
E
2.30
2.50
0.0906
0.0984
0.0043
E1
1.50
1.70
0.0590
0.0669
0.0153
0.0161
E2
1.10
1.26
0.0433
0.0496
0.20
0.0043
0.0079
L
0.48
0.68
0.0189
0.0268
3.00
0.1102
0.1181
L1
0.30
0.50
0.0153
0.0161
R
0.05
0.15
0.0019
0.0059
O
0°
12°
0°
12°
0.95 ref
1.80
Dim.
2.00
0.0374 ref
0.0709
0.0787
Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches
Issue 2 - January 2007
© Zetex Semiconductors plc 2007
6
www.zetex.com
ZXTN07045EFF
Intentionally left blank
Issue 2 - January 2007
© Zetex Semiconductors plc 2007
7
www.zetex.com
ZXTN07045EFF
Definitions
Product change
Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or
service. Customers are solely responsible for obtaining the latest relevant information before placing orders.
Applications disclaimer
The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for
the user’s application and meets with the user’s requirements. No representation or warranty is given and no liability whatsoever is
assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights
arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract,
tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract,
opportunity or consequential loss in the use of these circuit applications, under any circumstances.
Life support
Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written
approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body
or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or to affect its safety or effectiveness.
Reproduction
The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the
company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a
representation relating to the products or services concerned.
Terms and Conditions
All products are sold subjects to Zetex’ terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two
when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement.
For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office.
Quality of product
Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer.
To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our
regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork
Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels.
ESD (Electrostatic discharge)
Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices.
The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent
of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time.
Devices suspected of being affected should be replaced.
Green compliance
Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce
the use of hazardous substances and/or emissions.
All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with
WEEE and ELV directives.
Product status key:
“Preview”
Future device intended for production at some point. Samples may be available
“Active”
Product status recommended for new designs
“Last time buy (LTB)”
Device will be discontinued and last time buy period and delivery is in effect
“Not recommended for new designs” Device is still in production to support existing designs and production
“Obsolete”
Production has been discontinued
Datasheet status key:
“Draft version”
This term denotes a very early datasheet version and contains highly provisional information, which
may change in any manner without notice.
“Provisional version”
This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance.
However, changes to the test conditions and specifications may occur, at any time and without notice.
“Issue”
This term denotes an issued datasheet containing finalized specifications. However, changes to
specifications may occur, at any time and without notice.
Zetex sales offices
Europe
Americas
Asia Pacific
Corporate Headquarters
Zetex GmbH
Kustermann-park
Balanstraße 59
D-81541 München
Germany
Telefon: (49) 89 45 49 49 0
Fax: (49) 89 45 49 49 49
[email protected]
Zetex Inc
700 Veterans Memorial Highway
Hauppauge, NY 11788
USA
Zetex (Asia Ltd)
3701-04 Metroplaza Tower 1
Hing Fong Road, Kwai Fong
Hong Kong
Zetex Semiconductors plc
Zetex Technology Park, Chadderton
Oldham, OL9 9LL
United Kingdom
Telephone: (1) 631 360 2222
Fax: (1) 631 360 8222
[email protected]
Telephone: (852) 26100 611
Fax: (852) 24250 494
[email protected]
Telephone: (44) 161 622 4444
Fax: (44) 161 622 4446
[email protected]
© 2007 Published by Zetex Semiconductors plc
Issue 2 - January 2007
© Zetex Semiconductors plc 2007
8
www.zetex.com