Model KS20 KS20 MULTICRYSTAL PHOTOVOLTAIC MODULE TYPICAL OUTPUT 20 Wp HIGHLIGHTS OF KYOCERA PHOTOVOLTAIC MODULES Kyocera´s advanced cell processing technology and automated production facilities have produced a highly efficient multicrystal photovoltaic module. These cells are encapsulated between a tempered glass cover and an EVA pottant with PVF back sheet to provide maximum protection from the severest environmental conditions. The entire laminate is installed in an anodized aluminium frame to provide structural strength and ease of installation. APPLICATIONS Microwave / radio repeater stations Electrification of villages in remote areas Medical facilities in rural areas Power source for summer vacation homes Emergency communication systems Water quality and environmental data monitoring systems Navigation lighthouses, and ocean buoys Pumping systems for irrigation, rural water supplies and livestock watering Aviation obstruction lights Cathodic protection systems Desalination systems Recreational vehicles Railroad signals Sailboat charging systems SPECIFICATIONS Electrical Specifications Maximum Power Physical Specifications 20 Watts Length 520 mm Width 352 mm Maximum Power Voltage 16.9 Volts Maximum Power Current 1.20 Amps Depth 22 mm Open Circuit Voltage 21.5 Volts Weight 2.5 kg Short-Circuit Current 1.24 Amps Note: The electrical specifications are under test conditions of Irradiance of 2 1 kW/m , Spectrum of 1.5 air mass and cell temperature of 25ºC SOLARTEC S.A. Méjico 2145 – 1640 Martínez Buenos Aires – Argentina Tel: 54-11-4836-1040 Fax: 54-11-4836-0808/1381 [email protected] www.solartec.com.ar The contents of this catalogue are subject to change without prior notice for further improvement.