LED Red LED for optical link L7726 Emitter for 156 Mbps POF communications L7726 is designed for high-speed POF (Plastic Optical Fiber) communications. Both devices are molded into miniature plastic packages with lenses, allowing easy and efficient coupling to a POF. Features Applications l Red LED for POF data link l Plastic optical fiber communications (FA, office machine, l 650 nm emission suitable for POF communications home automation, LAN) l High-speed response: fc=100 MHz Typ. l Data transmission in locations subject to high l High output power: Po= -1.5 dBm (IF=30 mA, φ1 mm, POF) electromagnetic noise l Designed to be used with S7726 ■ Absolute maximum ratings (Ta=25 °C) Parameter Forward current Power dissipation Operating temperature Storage temperature Soldering Symbol IF Pmax Topr Tstg - Value 50 250 *1 0 to 60 -40 to +85 230 °C, 5 s, at least 1.5 mm away from package surface Unit mA mW °C °C - *1: Derate power dissipation at a rate of 1.7 mW/°C above Ta=25 °C ■ Electrical and optical characteristics (Ta=25 °C) Parameter Forward voltage Peak emission wavelength Spectral half width (FWHM) Fiber coupled optical power Cut-off frequency Symbol VF λp ∆λ Po fc Condition IF=30 mA IF=30 mA IF=30 mA IF=30 mA *2 IF=30 mA Min. 640 - Typ. 2.3 650 10 -1.5 100 Max. 660 - Unit V nm nm dBm MHz *2: Measured using a 1-meter long optical fiber (GH4001 made by Mitsubishi Rayon). 1 Red LED for optical link L7726 ■ Dimensional outline (unit: mm) 1.77 5.2 ± 0.3 (INCLUDING BURR) 0.97 5.0 0.4 10˚ 4.3 1.8 10˚ (0.9) 4.5 ± 0.3 (INCLUDING BURR) 4.3 6.6 ± 0.4 0.5 (1.5) (2.15) 1.4 0.69 0.25 1.27 1.27 1.27 (SPECIFIED AT THE LEAD ROOT) (0.9) (0.9) 10˚ 10˚ 5.0 CATHODE CATHODE ANODE CATHODE Tolerance unless otherwise noted: ±0.1, ±2˚ Shaded area indicates burr. Values in parentheses indicate reference value. KLEDA0085EA Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 2 Cat. No. KLED1050E01 Jun. 2006 DN