200MHz SAW Filter 9MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT20004 www. sipatsaw.com Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 199.85 200 200.15 Insertion Loss dB - 24.6 25 1 dB Bandwidth MHz - 8.92 - 3 dB Bandwidth MHz 9 9.26 - 40 dB Bandwidth MHz - 10.41 - 50 dB Bandwidth MHz - 10.55 10.8 Passband Variation dB - 0.85 1 Absolute Delay usec - 3.19 - Group Delay Variation(f0±4MHz) nsec - 70 150 Ultimate Rejection dB 50 55 - Material Temperature coefficient KHz/°C -3.6 Substrate Material - 112LT Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1A DIP3512 (35.0x12.8x4.7mm3) Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBT20004 Rev. Date 2008-02-03 Ver. 2.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 200MHz SAW Filter 9MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT20004 www. sipatsaw.com Matching Configuration C1 L1=L2=22nH C2 C1=33pF L2 L1 C2=36pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 Pad Configuration: 12.80 0.5 SIPAT LBT20005 4 08XX Input 1 Output 5 Ground All Others 4.7 Marking Configuration: 1) SIPAT: Manufacturer Name 4.5 2) LBT20004: Part Number 0.45 0.05 3) 08XX: Date Code 2.54 0.2 2.54 0.2 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 5 6 1 Package: DIP3512 7.62 0.2 4 3 2 25.40 0.2 Part Number LBT20004 Rev. Date 2008-02-03 Ver. 2.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 200MHz SAW Filter 9MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT20004 www. sipatsaw.com Typical Performance Frequency Respond Passband Respond Type Performance -14.5678 -23.0678 -24.5678 -23.5678 -34.5678 -24.0678 -44.5678 -24.5678 -64.5678 -25.0678 -74.5678 -25.5678 -84.5678 -94.5678 -26.0678 -104.5678 -26.5678 -114.5678 -27.0678 185 190 195 200 Frequency(MHz) 205 Horizontal: 5MHz/Div 210 215 192 Vertical: 10dB/Div 194 196 198 200 202 Horizontal: 2MHz/Div Group Delay Variation(f0±4MHz) 204 206 208 Vertical: 0.5dB/Div Phase Linearity(f0±4MHz) Type Performance Type Performance 3400 20 3350 15 3300 10 3250 3200 Degree(deg) X: 196 Y: 3167 X: 200 Y: 3183 3150 X: 204 Y: 2.663 5 X: 204 Y: 3203 X: 200 Y: -0.7524 X: 196 Y: -1.505 0 -5 3100 -10 3050 -15 3000 -20 2950 198 200 Frequency(MHz) 202 Horizontal: 2MHz/Div 204 206 -25 192 208 Vertical: 50ns/Div 194 196 198 Horizontal: 2MHz/Div Smith Chart S11 +j2.0 208 +j5.0 0.0 0.5 ∞ -j5.0 -j0.2 +j2.0 +j0.2 0.2 5.0 2.0 1.0 0.5 206 Vertical: 5deg/Div +j0.5 +j5.0 +j0.2 ∞ -j5.0 -j0.2 -j2.0 -j0.5 -j2.0 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 204 +j1.0 +j0.5 -j0.5 202 Smith Chart S22 +j1.0 0.0 200 Frequency(MHz) 5.0 196 2.0 194 1.0 2900 192 0.2 Group Delay Time(ns) Magnitude(dB) -54.5678 Part Number LBT20004 Rev. Date 2008-02-03 Ver. 2.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3