Part Number : www.SunLED.com LUGR59MCA T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Features UNIFORM LIGHT OUTPUT. LOW POWER CONSUMPTION. 3 LEADS WITH ONE COMMON LEAD. I.C. COMPATIBLE. LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) UR (GaAsP/ GaP) UG (GaP) Unit Reverse Voltage VR 5 5 V Forward Current IF 30 25 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 160 140 mA Power Dissipation PT 75 62.5 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Part Number LUGR59MCA Emitting Color Emitting Material Red GaAsP/GaP Green GaP Published Date : MAR 19,2008 Lens-color White Diffused Drawing No :SDSA0307 Operating Characteristics (TA=25°C) UR (GaAsP/ GaP) UG (GaP) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.0 2.2 V Forward Voltage (Max.) (IF=20mA) VF 2.5 2.5 V Reverse Current (Max.) (VR=5V) IR 10 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 627 565 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 625 568 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 45 30 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 15 pF Luminous Intensity (IF=20mA) mcd Wavelength nm λP min. typ. 2.6 4.8 627 1.6 4.8 565 V6 Checked : B.L.LIU Viewing Angle 2 θ 1/2 60° P.1/5 Part Number : www.SunLED.com LUGR59MCA T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP UR Published Date : MAR 19,2008 Drawing No :SDSA0307 V6 Checked : B.L.LIU P.2/5 Part Number : www.SunLED.com LUGR59MCA T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP UG Published Date : MAR 19,2008 Drawing No :SDSA0307 V6 Checked : B.L.LIU P.3/5 Part Number : www.SunLED.com LUGR59MCA T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 19,2008 Drawing No :SDSA0307 V6 Checked : B.L.LIU P.4/5 Part Number : www.SunLED.com T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP PACKING & LABEL SPECIFICATIONS Published Date : MAR 19,2008 LUGR59MCA Drawing No :SDSA0307 LUGR59MCA V6 Checked : B.L.LIU P.5/5