UF1000CT – UF1008CT WTE POWER SEMICONDUCTORS Pb 10A GLASS PASSIVATED DUAL ULTRAFAST RECTIFIER Features ! Glass Passivated Die Construction ! ! ! ! ! Ultra-Fast Switching Low Forward Voltage Drop C Low Reverse Leakage Current High Surge Current Capability G Plastic Material has UL Flammability Classification 94V-O D B Mechanical Data ! ! ! ! ! ! ! A PIN1 2 3 F Case: TO-220, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 2.24 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 TO-220 Dim Min Max 13.90 15.90 A 9.80 10.70 B 2.54 3.43 C 3.56 4.56 D 12.70 14.73 E 0.51 0.96 F 3.55 Ø 4.09 Ø G 5.75 6.85 H 4.16 5.00 I 2.03 2.92 J 0.30 0.65 K 1.14 1.40 L 2.29 2.79 P All Dimensions in mm E P I H L PIN 1 - J + PIN 3 - Case, PIN 2 K Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current VRRM VRWM VR 50 100 200 300 400 600 800 V VR(RMS) 35 70 140 210 280 420 560 V IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 125 A Forward Voltage @IF = 5.0A VFM @TA = 25°C @TA = 125°C IRM Peak Reverse Current At Rated DC Blocking Voltage @TC = 100°C UF UF UF UF UF UF UF Unit 1000CT 1001CT 1002CT 1003CT 1004CT 1006CT 1008CT 1.0 1.3 1.7 10 400 V µA Reverse Recovery Time (Note 1) trr 50 100 nS Typical Junction Capacitance (Note 2) Cj 80 50 pF Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. UF1000CT – UF1008CT 1 of 4 © 2006 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 10 8 6 4 2 0 0 50 100 100 1006CT - 1008CT 1.0 Pulse width = 300µs 2% duty cycle 0.1 150 0.2 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.6 1.0 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 180 400 8.3 ms single half-sine-wave JEDEC method 150 1000CT - 1004CT Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 1003CT - 1004CT 1000CT - 1002CT 10 120 90 60 100 1006CT - 1008CT 30 10 0 1 10 0.1 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Surge Current UF1000CT – UF1008CT 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION WTE UF100xCT WTE UF100xCT x Polarity = Manufacturer’s Logo = Device Number = 0, 1, 2, 3, 4, 6 or 8 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 525 x 31 x 6 50 555 x 145 x 95 2,000 572 x 306 x 218 8,000 19.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT Recommended isolated mounting when screw is at heatsink potential. 4-40 hardware is used. 4-40 PAN or HEX Head Screw Plain Washer Screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. The insulating bushing inside the mounting hole will insure the screw threads do not contact the metal base. The interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. UF1000CT – UF1008CT Insulating Bushing Rectifier Insulator Heatsink Compression Washer 4-40 HEX Nut 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity UF1000CT TO-220 50 Units/Tube UF1001CT TO-220 50 Units/Tube UF1002CT TO-220 50 Units/Tube UF1003CT TO-220 50 Units/Tube UF1004CT TO-220 50 Units/Tube UF1006CT TO-220 50 Units/Tube UF1008CT TO-220 50 Units/Tube 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, UF1000CT-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com We power your everyday. UF1000CT – UF1008CT 4 of 4 © 2006 Won-Top Electronics