SAW Filters TMX W360 SAW Bandpass Filter – DCS1800 Rx – RF Specification (Rev 1) Features................................................................................... P01 Package Drawing & Pin out.................................................... P01 Technical Characteristics ....................................................... P02 Matching Network.................................................................... P02 Nominal Response.................................................................. P03 Maximum Ratings.................................................................... P04 Marking & Packaging .............................................................. P04 TMX W360 SAW Bandpass Filter – DCS1800 Rx – RF th Specification (Rev 1) November 25 , 2005 Features q Rx Filter for DCS1800 q 1842,5 MHz Center Frequency q 75 MHz useable Passband q 50 Ω Single Input / 50 Ω Single Output q Ceramic Package for Surface Mounted Technology Package Drawing & Pin out The product is in conformance with the European RoHs Regulation 2002/95. Pin Configuration Input B Output D Case ground A, C 1 TMX W360 SAW Bandpass Filter – DCS1800 Rx – RF th Specification (Rev 1) November 25 , 2005 Technical Characteristics Reference Temperature : +25°C Electrical Parameters Unit Source Impedance (single ended) Ω Load Impedance (single ended) Minimum - Typical (1) Maximum 50 (2) - 50 (2) - Ω - Center Frequency fo MHz - 1842.5 - Bandwidth at –3 dB MHz 75 - - DC to 500 MHz dB 19 28 - 500 MHz to 1200 MHz dB 17.5 22.5 - 1200 MHz to 1705 MHz dB 19 22 - 1705 MHz to 1785 MHz dB 8 15.5 - 1920 MHz to 1980 MHz dB 10 31 - 1980 MHz to 2700 MHz dB 23 26.5 - 2700 MHz to 3840 MHz dB 15 29 - 3840 MHz to 6000 MHz dB 13 18.5 - Insertion Loss within 1805 MHz ~ 1880 MHz dB - 3.1 4.0 VSWR within 1805 MHz ~ 1880 MHz Ripple within 1805 MHz ~ 1880 MHz dB - 1.8 1.4 2.3 2.3 Absolute attenuation Notes : (1) Typical values are nominal performances at room temperature. (2) No external matching network is required. Matching Network 2 TMX W360 SAW Bandpass Filter – DCS1800 Rx – RF th Specification (Rev 1) November 25 , 2005 Nominal Frequency Response (Measurements) Frequency Response Frequency Response 3 TMX W360 SAW Bandpass Filter – DCS1800 Rx – RF th Specification (Rev 1) November 25 , 2005 Maximum Ratings Operating Temperature Range °C [-25°C ; +75°C] Storage Temperature Range °C [-40°C ; +85°C] DC voltage V 0 dBm 13 Input Power Level Marking LINE 1 LINE 2 Line 1: “P C” with P for the code product identification and C for the partner identifier Line 2: “Y W” with Y for the last digit of the year and W for the week code (A to Z for the week 1 to 26 and a to z for the week 27 to 52. Packaging 1. 2. 3. Temex label ESD Prevention label Pb free label (if applicable) 3 Scanning Orientation 4