DC/DC Converter TEN 15 Series 15 Watt Features Wide 2 : 1 Input Range High Efficiency up to 88 % Extended Operating Temperature Range – 40°C to +85°C Indefinite Short-Circuit Protection I/O-Isolation 1500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components Industry Standard Footprint Shielded Metal Case with insulated Baseplate 3 Year Product Warranty The TEN 15 series is a family of high performance 15W DC/DC converters in a compact 2"x1" low profile package with industrystandard footprint. A high efficiency allows a wide operating temperature range of –40°C to 85°C. A built-in EMI filter meets EN 55022, class A without any external components. Further standard features include over voltage protection and short-circuit protection. Typical applications for these converters are battery operated equipment, instrumentation, distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. Models Ordercode TEN 15-1210 TEN 15-1211 TEN 15-1212 TEN 15-1213 TEN 15-1221 TEN 15-1222 TEN 15-1223 TEN 15-2410 TEN 15-2411 TEN 15-2412 TEN 15-2413 TEN 15-2421 TEN 15-2422 TEN 15-2423 TEN TEN TEN TEN TEN TEN TEN 15-4810 15-4811 15-4812 15-4813 15-4821 15-4822 15-4823 www.tracopower.com Input voltage range Output voltage Output current max. Efficiency typ. 3,3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 4’000 3‘000 1’250 1’000 ± 1‘500 ± 625 ± 500 mA mA mA mA mA mA mA 79 82 86 86 83 86 84 % % % % % % % 18 – 36 VDC 3,3 5 12 15 ±5 ± 12 ± 15 VDC VDC VDC VDC VDC VDC VDC 4’000 3‘000 1’250 1’000 ± 1‘500 ± 625 ± 500 mA mA mA mA mA mA mA 80 84 85 85 84 86 86 % % % % % % % 36 – 75 VDC 3,3 5 12 15 ±5 ± 12 ± 15 VDC VDC VDC VDC VDC VDC VDC 4’000 3‘000 1’250 1’000 ± 1‘500 ± 625 ± 500 mA mA mA mA mA mA mA 81 83 87 86 85 88 87 % % % % % % % 9 – 18 VDC Page 1 of 3 DC/DC Converter TEN 15 Series 15 Watt Input Specifications Input current no load /full load Input current (full load) 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin; 3.3 Vout models: 12 Vin; other output models: 24 Vin; 3.3 Vout models: 24 Vin; other output models: 48 Vin; 3.3 Vout models: 48 Vin; other output models: Surge voltage (100 msec. max.) 12 Vin models: 24 Vin models: 48 Vin models: 40 mA typ. 25 mA typ. 20 mA typ. 1580 mA typ. 1500 mA typ. 780 mA typ. 740 mA typ. 390 mA typ. 370 mA typ. 36 V max. 50 V max.. 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A ESD (input) EN 61000-4-2, Perf. Criteria B Fast Transient (input) EN 61000-4-4, Perf. Criteria B Surge (input) EN 61000-4-5, Perf. Criteria B Output Specifications Voltage set accuracy ±1% Regulation – Input variation Vin min. to Vin max. – Load variation 10 – 100 % single output models: dual output models: – Load cross variation 25 % /100 % Ripple and noise (20 MHz Bandwidth) single output models: dual output models: ± 1 % max. ± 1 % max. ± 2 % max. ± 5 % max. 50 mVpk-pk max. 75 mVpk-pk max Temperature coefficient ± 0.02 % /K Start up time (nominal Vin and constant resistive load) 20 ms typ. Transient Response (25% load step change) 500 µs typ. Short circuit protection indefinite (automatic recovery) Over load protection 150% of Iout max typ. foldback Over voltage protection (Zener Diode Clamp) Capacitive load 3.3/5.0 Vout models: 12/15 Vout models: 3.3 Vout models: 5 Vout models / ± 5 Vout models: 12 Vout models / ±12 Vout models: 15 Vout models / ±15 Vout models: 3.9/6.2 V 15/18 V 10’200 µF max. 7’050 µF max. / ± 1’020 µF max. 1’035 µF max. / ± 495 µF max. 750 µF max. / ± 165 µF max. General Specifications Temperature ranges Derating – Operating – Case temperature – Storage 3.3 VDC output models: – 40 °C ... +85 °C + 100 °C max. – 55 °C ... + 125 °C 2.5%/K above 60°C All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 of 3 DC/DC Converter TEN 15 Series 15 Watt General Specifications Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) > 560’000 h @ + 25 °C Isolation (Input/Output) 1‘500 VDC 680 pF max. > 1‘000 M Ohm – Voltage – Capacity – Resistance Switching frequency (fixed) single output models: dual output models: 500 kHz typ. (Pulse width modulation PWM) 300 kHz typ. (Pulse width modulation PWM) Vibration 10-55Hz, 2G, 30 minutes along X,Y,Z Safety standards UL 1950, EN 60950, IEC 60950 (Compliance up to 60 VDC input voltage(SELV limit) Savety approvals UL /cUL File E188913 Physical Specifications Case material Copper, Nickel plated Baseplate material Non conductive FR4 Potting material Epoxy (UL 94V-0 rated) Weight 31g (1.09oz) Soldering temperature max. 260 °C / 10 sec. Outline Dimensions mm (inches) 50.8 ±0.5 (1.0 ±0.02) 25.4 ±0.5 (0.8) 6.2 10.2 ±0.5 Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 +Vout +Vout 4 No pin Common 5 –Vout –Vout (0.24) (0.402 ±0.02) ±0.02) (0.4 20.32 4 (0.4) 1 2 5 10.2 ±0.5 Pin-Out 3 Bottom View (0.4) (0.8) 10.16 10.16 20.32 (0.6 ±0.02) (0.098 ±0.02) 15.2 ±0.5 2.5 ±0.5 5.08 (0.2) (2.0 ±0.02) Insulated baseplate Pin diameter ø 1.0 ±0.05 (0.039 ±0.002) Specifications can be changed without notice Rev. 12/04 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41 43311 4511 • Fax +41 43311 4545 • [email protected] • www.tracopower.com Page 3 of 3