Detector/Amplifier Hybrids Without Feedback Resistor SD 444-42-22-261 BLUE ENHANCED PACKAGE DIMENSIONS INCH 3 4 2 1 5 6 8 7 1 INCH PACKAGE CHIP DIMENSIONS DESCRIPTION APPLICATIONS The SD 444-42-22-261 is a detector/amplifier hybrid that combines a silicon photodiode with an opamp without the feedback resistor and capacitor, available in a hermetic metal can package. • Instrumentation • Industrial • Medical SPECTRAL RESPONSE AMPLIFIER SPECIFICATIONS (TA)= 23°C UNLESS OTHERWISE NOTED 1 2 mV 12 nV/√Hz 15 40 pA 20 30 pA Input Offset Current Input Current Noise @ f = 10KHz Supply Current 20 30 fA/√Hz 6.5 7 mA GBP Gain Bandwidth Product 18 TSTG Storage Temperature -65 +125 TO Operating Temperature -40 +85 In IS 0.60 0.50 0.40 0.30 0.20 0.10 0.00 Wavelength (nm) MHz °C °C . DETECTOR SPECIFICATIONS (TA)= 23°C UNLESS OTHERWISE NOTED SYMBOL CHARACTERISTIC TEST CONDITIONS ID RSH Dark Current Shunt Resistance CJ Junction Capacitance VR = 10 V VR = 0 V VR = 0 V, f = 1 MHz VR = 10 V, f = 1 MHz Spot Scan l= 450 nm, VR = 0 V lrange R Spectral Application Range Responsivity MIN TYP MAX UNITS 150 nA MW 15 1700 340 250 pF 1100 0.28 nm 1200 V 1100 Iio ± 18 1000 Iib ± 15 900 Vn ±5 0.70 800 Input Offset Voltage Input Voltage Noise @ f = 10KHz Input Bias Current UNITS 700 Vio MAX 600 Voltage Supplies TYP 200 Vs MIN Responsivity (A/W) SYMBOL PARAMETER 500 Low noise Blue enhanced Custom feedback High speed 400 • • • • 300 FEATURES Detector/Amplifier Hybrids Without Feedback Resistor SD 444-42-22-261 SCHEMATIC AND CONNECTION DIAGRAM 7 7 μ 2 μ 2 6 8 3 4 1 5 μ Note: Components shown outside the dashed area are external to the device, and must be supplied by the user. 6 8 3 4 1 5 μ Note: Components shown outside the dashed area are external to the device, and must be supplied by the user. Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 • www.advancedphotonix.com 2