SENSITRON SHD674072B

SENSITRON
SEMICONDUCTOR
SHD674072
SHD674072B
TECHNICAL DATA, PROVISIONAL DATA ONLY
DATA SHEET 4115, Rev. C
HERMETIC SILICON CARBIDE RECTIFIER
DESCRIPTION: A 1200-VOLT, 20 AMP POWER SILICON CARBIDE RECTIFIER IN A CERAMIC
HERMETIC SHD-3 HIGH PROFILE PACKAGE
FEATURES:
• NO RECOVERY TIME OR REVERSE RECOVERY LOSSES
• NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
1200
Volts
IO
20
Amps
MAXIMUM REPETITIVE FORWARD SURGE CURRENT
(t = 8.3ms, Sine)
IFRM
50
Amps
MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
(t = 10µs, pulse)
IFSM
200
Amps
MAXIMUM JUNCTION CAPACITANCE (V r =5V)
CT
600
pF
MAXIMUM POWER DISSIPATION
Pd
40
W
RθJC
1.00
°C/W
Top, Tstg
-55 to
+200
°C
CHARACTERISTIC
TYP
MAX.
UNITS
MAXIMUM FORWARD VOLTAGE DROP If = 2 A, TJ=25 °C
1.10
1.40
TJ =175 °C
0.95
1.30
MAXIMUM FORWARD VOLTAGE DROP If = 20 A, TJ =25 °C
1.65
1.80
TJ =175 °C
2.55
3.00
TJ = 25 °C
0.15
1.60
TJ = 175 °C
0.50
8.00
mA
40
N/A
nC
PEAK INVERSE VOLTAGE
MAXIMUM DC OUTPUT CURRENT
MAXIMUM THERMAL RESISTANCE (Junction to Case)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
ELECTRICAL CHARACTERISTICS
MAXIMUM REVERSE CURRENT PIV = 1200V,
TOTAL CAPACITIVE CHARGE (V R =1200V, IF =20A, di/dt=500A/µs and
TJ =25°C) QC
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
Volts
Volts
SENSITRON
SEMICONDUCTOR
SHD674072
SHD674072B
TECHNICAL DATA, PROVISIONAL DATA ONLY
DATA SHEET 4115, Rev. C
MECHANICAL DIMENSIONS: In Inches / mm
.410±.010
(10.4±.254)
.410±.010
(10.4±.254)
SHD -3
(High Profile)
.075 (1.91) Max
Moly Lid
.090 (2.29) Max
Alumina Ring
Moly Base
.560±.020
(14.2±.508)
.410±.010
(10.4±.254)
SHD -3B
(High Profile)
.150±.010
(3.81±.254)
.410±.010
(10.4±.254)
.015±.005
(.381±.127)
Copper Anode
.090 (2.29) Max
.020±.005 R
(.508±.127 )
Alumina Ring
Moly Base
(Cathode)
.015±.002
(.381±.051)
.060±.010 (1.52±.254)
Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche
capabilities of the device are limited.
Customer designs will need to accommodate these limitations and avoid exposure of the devic e to this and other potentially
damaging conditions in their applications.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]