ITT LP22C31T203DQ

C&K LP Series
Miniature Snap-in Slide Switches
Features/Benefits
• 6 to 11 AMPS available
• Easy assembly—Snap-in mounting
• Contamination resistant—extended actuator
• Positive detent
• RoHS compliant
Typical Applications
• Small appliances
• Outdoor appliances
• Portable tools
Models Available
Slide
J
Specifications
Materials
CONTACT RATING: Q contact material (LP0X, LP2X Models: 6 AMPS
@ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA).
(LP7X, LP8X Models): 11 AMPS @ 125/250 V AC (UL/CSA).
See page I-27 for additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
CONTACT RESISTANCE: Below 10 m Ω typ. initial
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
OPERATING TEMPERATURE: -30ºC to +65ºC
STORAGE TEMPERATURE: -30ºC to +85ºC
HOUSING: 6/6 nylon (UL94V-2), black.
ACTUATOR: Glass filled acetal, UV and petroleum resistant,
black.
CONTACTS: Q contact material: Copper, silver plated. See page
I-27 for additional contact materials.
TERMINALS: Q contact material: Copper, silver plated. See page
I-27 for additional contact materials.
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J–25 and J–26. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
LP22 DPDT, 6 AMP
LP02 SPDT, 6 AMP
LP81 DPST, 11 AMP
LP82 DPDT, 11 AMP
Actuator
C2 Black cap
C1 Whitecap
C3 Red cap
Detent
1 With detent
Mounting Style
T2 Snap-in panel with tabs
(D, L, N markings only)
Terminations
03 Solder lug with hole
Housing Markings
NONE No markings
D ON-OFF
Contact Material
Q Silver
B Gold
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–24
www.ittcannon.com
C&K LP Series
Miniature Snap-in Slide Switches
SWITCH FUNCTION
NO.
POLES
MODEL
NO.
LP02
SP
AMP
RATING*
SWITCH
FUNCTION
6
SPDT
NO.
POLES
SCHEMATIC
MODEL
NO.
AMP
RATING*
SWITCH
FUNCTION
LP22
6
DPDT
LP81
11
DPST
LP82
11
DPDT
SCHEMATIC
DP
All models
with all options when ordered with ‘Q’ contact material.
Contacts make on side actuator thrown.
* For complete contact ratings, see CONTACT MATERIALS Section, page J-26.
J
Slide
Terminal Nos.
For Reference Only
Part number shown: LP22C21S203Q
ACTUATOR
C1; C2; C3
OPTION
CODE2
ACTUATOR CAP
COLOR
C2
BLACK
C1
WHITE
C3
RED
NOTE: Actuator finish: gloss.
Other colors available,
consult Customer Service Center.
DETENT
1
WITH DETENT
MOUNTING STYLE
T2
SNAP-IN PANEL WITH TABS
PANEL THICKNESS
DIM ‘A’
.030–.045
(0,76) (1,14)
.578
(14,68)
.046–.059
(1,17) (1,50)
.585
(14,86)
.060–.089
(1,52) (2,26)
.598
(15,19)
.090–.120
(2,29) (3,05)
.610
(15,49)
Mounting style T2 suitable for markings.
See HOUSING MARKINGS options.
PANEL MOUNTING
DIM. ‘A’
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–25
www.ittcannon.com
C&K LP Series
Miniature Snap-in Slide Switches
TERMINATIONS
03
SOLDER LUG WITH HOLE
HOUSING MARKINGS
J
Slide
NONE
D
NO MARKINGS
ON-OFF
Orientation of actuator
and terminals.
NOTE: Housing markings are available with ‘T2’ mounting style only. The marking color
on all housings with marking options ‘D’ is white, standard. Other marking colors are
available, consult Customer Service Center.
CONTACT MATERIAL
OPTION
CODE
RoHS
COMPLIANT
RoHS
COMPLIANT
CONTACT
MATERIAL
Q
YES
YES
SILVER 2
B
YES
YES
GOLD 1
RATINGS
POWER
LP0X, LP2X MODELS: 6 AMPS @ 125 V AC or 28 V DC;
3 AMPS @ 250 V AC (UL/CSA).
LP7X, LP8X MODELS: 11 AMPS @ 125/250 V AC (UL/CSA).
LOW LEVEL/DRY
CIRCUIT
0.4 VA MAX. @20 V AC OR DC MAX.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
NOTE: Any models supplied with Q or B contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).
3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.
2
All models
with all when ordered with ‘Q’ contact material.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–26
www.ittcannon.com