OPA733 Series 1 Watt Light Spot on Anotherm Linear Heat Spreader OPA733 Series • • • • • OPA733_ (120° Beam Angle) 1 watt LED on round substrate Mono-color per strip (Blue, Green, Red, Yellow, White) Two component beam angle options (120° or 40°) Universal connector (Tyco 2-292173-2 mates with 173977-2) RoHS Compliant Product Photo Here OPA733_D (40° Beam Angle) The OPA733 Series are designed for areas where lighting intensity and reliability are essential. The light beam angles of 40° and 120° are ideal for illuminating small and medium size areas while requiring minimal space. A patented substrate is used to ensure the best heat dissipation of any light assembly in the industry. For custom colors and design contact your OPTEK representative. Electrical / Optical Characteristics: TA=25°C, IF=350mA Color Dominant Wavelength 26 Yellow 587 nm 3.6 9 Blue 470 nm OPA733G 3.6 48 Green 530 nm OPA733R 2.5 35 Red 625 nm OPA733W 3.6 48 White 6,500°K OPA733YD 2.5 26 Yellow 587 nm OPA733BD 3.6 9 Blue 470 nm OPA733GD 3.6 48 Green 530 nm OPA733RD 2.5 35 Red 625 nm OPA733WD 3.6 48 White 6,500°K Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA733Y 2.5 OPA733B Beam Angle 120° 40° + Voltage Ground OPA733_ OPA733_D See OVSP_BCR4 for component specifications See OVSP_4CR44 for component specifications DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 04/06 Page 1 of 1