MP1505 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION MP1510 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 15 Amperes FEATURES * * * * Superior thermal desing 300 amperes surge rating // 1/4 universal faston terminal Hole thru for # 10 screw MECHANICAL DATA * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O MP-15 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. MP-15W For capacitive load, derate current by 20%. MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) SYMBOL MP1505 MP151 MP152 MP154 MP156 MP158 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 Maximum DC Blocking Voltage VDC 50 100 200 400 600 RATINGS o Maximum Average Forward Output Current at Tc = 55 C MP1510 UNITS 1000 Volts 560 700 Volts 800 1000 Volts IO 15.0 Amps I FSM 300 Amps Typical Thermal Resistance (from junction to case) R θJC 2 Typical Thermal Resistance (from junction to ambient RθJA 19 Operating and Storage Temperature Range T J, T STG Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 0 C/W 0 -55 to + 150 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL VF Maximum Forward Voltage Drop per element at 7.5A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T C = 100 o C NOTE: 1. Suffix ”W” for wire type 2. ”Fully ROHS compliant”,”100% Sn plating(Pb-free). MP1505 MP151 MP152 MP154 MP156 MP158 MP1510 UNITS 1.1 Volts 5.0 uAmps 0.5 mAmps IR 2005-3 REV: A RATING AND CHARACTERISTIC CURVES ( MP1505 THRU MP1510 ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD 400 300 200 100 0 20 15 10 FIG. 3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 10 TJ = 25 Pulse Width = 300us 1% Duty Cycle 1.0 .1 .01 .6 .7 .8 .9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE, (V) 60 Hz RESISTIVE OR INDUCTIVE LOAD 5 0 0 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS REVERSE CURRENT, (uA) 2 50 100 CASE TEMPERATURE, ( 1.0 TJ = 25 .1 .01 0 20 40 60 80 .32 x .252 (0.81 x 6.35) .673 (17.1) 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) MAX. .311 (7.9) MIN. .787 (20.0) .043 (1.1) .039 (1.0) 1.142 (29) 1.102 (28) Hole for # 10 screw Min .469 (11.9) .429 (10.9) .583 (14.8) 1.142 (29) 1.102 (28) Hole for # 10 screw Min f.200 (5.08) .634 (16.1) 1.142 (29) 1.102 (28) .673 (17.1) .634 (16.1) 175 10 .732 (18.6) .693 (17.6) .480 (12.2) .425 (10.8) 150 ) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS Max. .311 (7.9) .693 (17.6) INSTANTANEOUS FORWARD CURRENT, (A) 1 25 .543 (13.8) .732 (18.6) .693 (17.6) MP-15 MP-15W RECTRON .200 (5.08) .142 (29.0) .102 (28.0) 8.3ms Single Half Sine-Wave (JEDEC Method) AVERAGE FORWARD CURRENT, (A) 500 .732 (18.6) PEAK FORWARD SURGE CURRENT, (A) SURGE CURRENT